Flow loss analysis of a two-stage axially split centrifugal pump with double inlet under different channel designs

Abstract

The double-stage axially split centrifugal pump is widely used in water diversion and water pumping stations due to their ability to deliver at high heads and large flow rate for long running hours. Their flow characteristics can be greatly influenced by the geometry of the channels between the stages, which is a prominent place for irreversible loss to occur. Numerical investigations were extensively carried out and a comparison was drawn between two multistage axially split centrifugal pumps, with different channel designs between its stages. The reliability of the numerical model was confirmed after a good agreement existed between numerical results and the experiments. Subsequently, entropy generation terms were used to evaluate turbulence dissipation to characterize the flow losses. The modified channels had a great effect on reducing swirl near the impeller eye, thereby improving pump head by 12.5% and efficiency by 4.98% at the design condition. They however induced flow impact, causing an unusual separation, which generated high turbulence dissipation at the blade surfaces. The channels and second stage impeller were identified as major areas for selective optimization since their turbulence dissipation was dominant. Consequently, entropy production analysis with computational fluid dynamics could be relied upon to reveal the loss locations for selective optimization in centrifugal pumps.

Keywords

Channels between stages axially split entropy production analysis numerical simulation centrifugal pump

Get full access to this article

View all access options for this article.

References

Zou

Wang

Yao

et al.

Impeller radial force evolution in a large double-suction centrifugal pump during startup at the shut-off condition. Nuc Eng Design 2016; 310: 410–417.

Sekino Y, Watanabe H, Christakopoulos F, et al. Optimization of high pressure pump flow passages based on adjoint and CFD. In: ASME 2016 fluids engineering division summer meeting. American Society of Mechanical Engineers, 1 January 2004, pp.805–814.

Suzuki T and Takemura T. CFD analysis of performance of five-stage high-pressure volute pump. In: ASME 2016 fluids engineering division summer meeting. American Society of Mechanical Engineers, 10 July 2016, pp.V01AT02A007–V01AT02A007.

Tan

Wang

et al.

The effects of radial inlet with splitters on the performance of variable inlet guide vanes in a centrifugal compressor stage. Proc IMechE, Part C: J Mechanical Engineering Science 2011; 225: 2089–2105.

Zhou

Cai

. Experimental study on the influence of diffuser and inlet guide vane for the performance of centrifugal compressor. Expt Tech 2008; 32: 26–33.

Fukutomi

Nakamura

. Performance and internal flow of cross-flow fan with inlet guide vane. JSME Int J Series B Fluids Therm Eng 2005; 48: 763–769.

Cui MM. Unsteady flow around suction elbow and inlet guide vanes in a centrifugal compressor. In ASME turbo expo 2004: power for land, sea, and air. American Society of Mechanical Engineers, 1 January 2004, pp.717–735.

Coppinger

Swain

. Performance prediction of an industrial centrifugal compressor inlet guide vane system. Proc IMechE, Part A: J Power and Energy 2000; 214: 153–164.

Tan

Cao

Gui

. Hydraulic design and pre-whirl regulation law of inlet guide vane for centrifugal pump. Sci China Tech Sci 2010; 53: 2142–2151.

10.

Tan

Zhu

Cao

et al.

Influence of prewhirl regulation by inlet guide vanes on cavitation performance of a centrifugal pump. Energies 2014; 7: 1050–1065.

11.

Tan

Cao

Wang

et al.

Influence of axial distance on pre-whirl regulation by the inlet guide vanes for a centrifugal pump. Sci China Tech Sci 2012; 55: 1037–1043.

12.

Liu

Tan

Cao

. Influence of geometry of inlet guide vanes on pressure fluctuations of a centrifugal pump. ASME J Fluids Eng 2018; 140: 091204–091204.

13.

Van der Schoot M and Visser F. Efficiency upgrade of a double-case pump using CFD-based design optimization and scaled model tests. In: ASME/JSME/KSME 2015 joint fluids engineering conference. American Society of Mechanical Engineers, 26 July 2015, pp.V001T33A009–V001T33A009.

14.

Liu

Tan

. Tip clearance on pressure fluctuation intensity and vortex characteristic of a mixed flow pump as turbine at pump mode. Renew Energy 2018; 129: 606–615.

15.

Hao

Tan

. Symmetrical and unsymmetrical tip clearances on cavitation performance and radial force of a mixed flow pump as turbine at pump mode. Renew Energy 2018; 127: 368–376.

16.

Liu

. Pressure fluctuation prediction of a model Kaplan turbine by unsteady turbulent flow simulation. J Fluids Eng 2009; 131: 101102–101102.

17.

Zhang

L-x

Wang

W-q

Guo

. Intrinsic features of turbulent flow in strongly 3-D skew blade passage of a Francis turbine. J Hydro 2007; 19: 92–99.

18.

Qian

Z-d

Yang

J-d

Huai

W-x

. Numerical simulation and analysis of pressure pulsation in Francis hydraulic turbine with air admission. J Hydro 2007; 19: 467–472.

19.

Majidi K. Numerical study of unsteady flow in a centrifugal pump. In: ASME turbo expo 2004: power for land, sea, and air. American Society of Mechanical Engineers, 1 January 2004, pp.805–814.

20.

Zhang

Pan

et al.

Numerical investigation of blade dynamic characteristics in an axial flow pump. Therm Sci 2013; 17: 1511–1514.

21.

Pei

Zhang

Appiah

et al.

Performance prediction based on effects of wrapping angle of a side channel pump. Energies 2019; 12: 139–139.

22.

Yang

Pavesi

Liu

et al.

Unsteady flow characteristics regarding hump instability in the first stage of a multistage pump-turbine in pump mode. Renew Energy 2018; 127: 377–385.

23.

Kock

Herwig

. Entropy production calculation for turbulent shear flows and their implementation in cfd codes. Int J Heat Flow 2005; 26: 672–680.

24.

Kock

Herwig

. Local entropy production in turbulent shear flows: a high-Reynolds number model with wall functions. Int J Heat Mass Trans 2004; 47: 2205–2215.

25.

Herwig

Kock

. Direct and indirect methods of calculating entropy generation rates in turbulent convective heat transfer problems. Heat Mass Trans 2007; 43: 207–215.

26.

Herwig

Kock

. Local entropy production in turbulent shear flows: a tool for evaluating heat transfer performance. J Therm Sci 2006; 15: 159–159.

27.

Böhle M, Fleder A and Mohr M. Study of the losses in fluid machinery with the help of entropy. In: 16th International symposium on transport phenomena and dynamics of rotating machinery, 10 April 2016.

28.

Gong

Wang

et al.

Entropy production analysis for hump characteristics of a pump turbine model. Chin J Mech Eng 2016; 29: 803–812.

29.

Gong

Wang

Chen

et al.

Application of entropy production theory to hydro-turbine hydraulic analysis. Sci China Tech Sci 2013; 56: 1636–1643.

30.

Pei

Yuan

et al.

Clocking effect of vaned diffuser on hydraulic performance of high-power pump by using the numerical flow loss visualization method. Energy 2019; 170: 986–997.

31.

Stephen

Yuan

Pei

et al.

Numerical flow prediction in inlet pipe of vertical inline pump. J Fluids Eng 2017; 140: 051201–051201.