Design,analysis,and performance verification of a water jet thruster for amphibious jumping robot

Abstract

In nature, certain aquatic animals and seabirds are capable of leaping from water surface and overcoming aquatic obstacles with ease. Inspired by that, researchers have developed various underwater robots, which can perform the aquatic jumping motion. Although there are several ways to achieve it, the water jet propulsion is the most appropriate approach for the amphibious jumping robot, which is under development. In this paper, a high-performance water jet thruster powered by liquid nitrogen is proposed to be the potential actuator for the amphibious jumping robot. The theoretical jumping model is built to optimize the initial volume fraction of water inside thruster and analyze its parameters' variation during water jet. Then the computational fluid dynamics simulations by ANSYS FLUENT software are carried out to analyze the self-pressurization process of liquid nitrogen as well as the water jet process. Finally, the proof-of-concept outdoor experiments present that the 3.7 kg thruster's maximum aquatic and terrestrial jumping heights are 25.1 m and 24.4 m, respectively. A simple heat transfer analysis between water and liquid nitrogen is also conducted, and the order of magnitude estimation of heat transfer coefficient is given to be 265W/ (m²·K) based on the experimental reaction time.

Keywords

Amphibious jumping robot water jet thruster liquid nitrogen computational fluid dynamics simulation

Get full access to this article

View all access options for this article.

References

Yang

Tan

et al.

Amphibious biomimetic robots: a review. Robot 2007; 29: 601–608.

Dui

Yang

et al.

On a bio-inspired amphibious robot capable of multimodal motion. IEEE Trans Mechatron 2012; 17: 847–856.

Park HS and Sitti M. Compliant footpad design analysis for a bio-inspired quadruped amphibious robot. In: IEEE international conference on intelligent robots and systems, St. Louis, USA, 2009, pp.645–651. New York: IEEE.

Zuo Z, Wang Z, Li B, et al. Serpentine locomotion of a snake-like robot in water environment. In: IEEE international conference on robotics and biomimetics, Bangkok, Thailand, 2009, pp.25–30. New York: IEEE.

Hirano LA, Martins-Filho LS, Duarte RO, et al. Development of an amphibious robotic propulsor based on electroactive polymers. In: International conference on autonomous robots and agents, Wellington, New Zealand, 2009, pp.284–289. New York: IEEE.

Siddall

Kovač

. Launching the AquaMAV: bioinspired design for aerial-aquatic robotic platforms. Bioinspir Biomim 2014; 9: 031001.

Stevenson P, McPhail SD, Tsimplis M, et al. Air launched platforms-a new approach for underwater vehicles. In: OCEANS 2009-EUROPE, Bremen, German, 2009, pp.1–8. New York: IEEE.

Shkurti F, Xu A, Meghjani M, et al. Multi-domain monitoring of marine environments using a heterogeneous robot team. In: IEEE/RSJ international conference on intelligent robots and systems (IROS), Vilamoura, Portugal, 2012, pp.1747–1753. New York: IEEE.

Kawatsuma

Fukushima

Okada

. Emergency response by robots to Fukushima-Daiichi accident: summary and lessons learned. Ind Robot 2012; 39: 428–435.

10.

Rayner

JMV

. Pleuston: animals which move in water and air. Endeavour 1986; 10: 58–64.

11.

O'Dor

Stewart

Gilly

et al.

Squid rocket science: how squid launch into air. Deep Sea Res Part II: Topical Stud Oceanogr 2013; 95: 113–118.

12.

et al.

Development of a fast-swimming dolphin robot capable of leaping. IEEE/ASME Trans Mechatron 2016; 21: 2307–2316.

13.

Yan J, Wang T, Zhang X, et al. Structural design and dynamic analysis of biologically inspired water-jumping robot. In: IEEE international conference on information and automation (ICIA), Hailar, China, 2014, pp.1295–1299. New York: IEEE.

14.

. CFD simulation of effect of vortex ring for squid jet propulsion and experiments on a bionic jet propulsor. Int J Serv Sci Technol 2016; 9: 211–226.

15.

Siddall R and Kovac M. A water jet thruster for an aquatic micro air vehicle. In: IEEE international conference on robotics and automation, Seattle, USA, 2015, pp.3979–3985. New York: IEEE.

16.

Watanabe

Hayashi

Iwao

et al.

Thrust characteristics of water/liquid nitrogen rocket engine. Space Technol 2008; 7: 45–52.

17.

Prusa

. Hydrodynamics of a water rocket. SIAM Rev 2000; 42: 719–726.

18.

Gommes

. A more thorough analysis of water rockets: moist adiabats, transient flows, and inertial forces in a soda bottle. Am J Phys 2010; 78: 236–243.

19.

Kagan

Buchholtz

Klein

. Soda-bottle water rockets. Phys Teach 1995; 33: 150–157.

20.

Gao

Sun

. Numerical computation and checkout of torpedo body's drag coefficient and lift coefficient. Comput Digital Eng 2008; 36: 11–15.

21.

Wesseling

. Principles of computational fluid dynamics, New York: Springer, 2009.

22.

Zhang

. Numerical simulation of phase change heat transfer of liquid nitrogen based on FLUENT. Cryogenics 2014; 42: 26–29.

23.

Siddall

Kovac

. Fast aquatic escape with a jet thruster. IEEE/ASME Trans Mechatron 2017; 22: 217–226.

24.

Wen

Chen

Ding

et al.

Liquid nitrogen injection into water: pressure build-up and heat transfer. Cryogenics 2006; 46: 740–748.

25.

Guo D, Bacciaglia A, Ceruti A, et al. Design and development of a transition propulsion system for bimodal unmanned vehicles. In: IEEE international conference on unmanned aircraft systems (ICUAS), Dallas, USA, 2018, pp.549–558. New York: IEEE.

26.

Clarke

Martinez-Herasme

Crookes

et al.

Experimental study of jet structure and pressurisation upon liquid nitrogen injection into water. Int J Multiphase Flow 2010; 36: 940–949.