A detailed study of compression tests on lattice structures obtained by selective laser melting with AlSi7Mg powder is presented here. Two different cell topologies have been investigated: the body-centered cubic cell and the face centered cubic cell or 3D Warren structure. Specimens of different volume have been printed in order to investigate the effect of the size on the mechanical response and properties of the structure. Particular attention has been paid to the definition of the test procedure and the analysis of the data to properly characterize the microlattice. No remarkable effect of the specimen size has been found in terms of elastic modulus and yielding stress. On the contrary, the maximum stress and the failure mechanism are influenced by the size of the specimen; for the body-centered cubic cell, a detailed analysis has been performed through digital image correlation of the failure. Test results have been compared with the results of an elasto-plastic simulation performed on a single cell of lattice with periodic boundary conditions, showing a good prediction in terms of elastic modulus and yielding stress.
WadleyHNFleckNAEvansAG. Fabrication and structural performance of periodic cellular metal sandwich structures. Compos Sci Technol2003; 63: 2331–2343.
2.
WadleyHN. Multifunctional periodic cellular metals. Philos Trans R Soc A Math Phys Eng Sci2006; 364: 31–68.
3.
QueheillaltDTWadleyHN. Titanium alloy lattice truss structures. Mater Des2009; 30: 1966–1975.
4.
ChirasS. The structural performance of near-optimized truss core panels. Int J Solids Struct2002; 39: 4093–4115.
5.
DeshpandeVSFleckNA. Collapse of truss core sandwich beams in 3-point bending. Int J Solids Struct2001; 38: 6275–6305.
6.
KooistraGWWadleyHNG. Lattice truss structures from expanded metal sheet. Mater Des2007; 28: 507–514.
7.
LimCHJeonIKangKJ. A new type of sandwich panel with periodic cellular metal cores and its mechanical performances. Mater Des2009; 30: 3082–3093.
8.
QueheillaltDTWadleyHNG. Cellular metal lattices with hollow trusses. Acta Mater2005; 53: 303–313.
9.
XiongJMinesRGhoshR, et al.Advanced micro-lattice materials. Adv Eng Mater2015; 17: 1253–1264.
10.
JacobsenAJBarvosa-carterWNuttS. Compression behavior of micro-scale truss structures formed from self-propagating polymer waveguides. Adv Mater2007; 55: 6724–6733.
11.
Tancogne-DejeanTMohrD. Elastically-isotropic truss lattice materials of reduced plastic anisotropy. Int J Solids Struct2018; 138: 24–39.
12.
GornyBNiendorfTLackmannJ, et al.In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting. Mater Sci Eng A2011; 528: 7962–7967.
13.
YanCHaoLHusseinA, et al.Evaluations of cellular lattice structures manufactured using selective laser melting. Int J Mach Tools Manuf2012; 62: 32–38.
14.
HeinlBPRottmairAKörnerC, et al.Cellular titanium by selective electron beam melting. Adv Eng Mater2007; 9: 360–364.
15.
ParthasarathyJStarlyBRamanS. A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications. J Manuf Process2011; 13: 160–170.
16.
MurrLEGaytanSMMedinaFM, et al.Next-generation biomedical implants using additive manufacturing of complex, cellular. Philos Trans R Soc A Math Phys Eng Sci2010; 368: 1999–2032.
17.
WauthleRVan Der StokJYavariSA, et al.Additively manufactured porous tantalum implants. Acta Biomater2015; 14: 217–225.
18.
TianJKimTLuTJ, et al.The effects of topology upon fluid-flow and heat-transfer within cellular copper structures. Int J Heat Mass Transfer2004; 47: 3171–3186.
19.
McKownSShenYBrookesWK, et al.The quasi-static and blast loading response of lattice structures. Int J Impact Eng2008; 35: 795–810.
20.
EvansAGHeMYDeshpandeVS, et al.Concepts for enhanced energy absorption using hollow micro-lattices. Int J Impact Eng2010; 37: 947–959.
21.
Miller DL, Kersten G and Frost W. Systems and methods for protecting a flight recorder. Patent US8723057, USA, 2012.
22.
RashedMGAshrafMMinesRA, et al.Metallic microlattice materials: a current state of the art on manufacturing, mechanical properties and applications. Mater Des2016; 95: 518–533.
23.
AshbyMF. The properties of foams and lattices. Philos Trans R Soc A Math Phys Eng Sci2006; 364: 15–30.
24.
FleckNADeshpandeVSAshbyMF. Micro-architectured materials: past, present and future. Proc R Soc A Math Phys Eng Sci2010; 466: 2495–2516.
25.
SchaedlerTAJacobsenAJTorrentsA, et al.Supplementary-ultralight metallic microlattices. Science2011; 334: 962–965.
26.
Tancogne-DejeanTSpieringsABMohrD. Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading. Acta Mater2016; 116: 14–28.
27.
KadkhodapourJMontazerianHDarabiAC, et al.Failure mechanisms of additively manufactured porous biomaterials: effects of porosity and type of unit cell. J Mech Behav Biomed Mater2015; 50: 180–191.
28.
Amin YavariSAhmadiSMWauthleR, et al.Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials. J Mech Behav Biomed Mater2015; 43: 91–100.
29.
ISO 13314(1):2011. International Standard, mechanical testing of metals – ductility testing – compression test for porous and cellular metals.
30.
UshijimaKCantwellWJMinesRA, et al.An investigation into the compressive properties of stainless steel micro-lattice structures. J Sandwich Struct Mater2011; 13: 303–329.
31.
DragoniE. Optimal mechanical design of tetrahedral truss cores for sandwich constructions. J Sandwich Struct Mater2013; 15: 464–484.
32.
LuxnerMHStampflJPettermannHE. Finite element modeling concepts and linear analyses of 3D regular open cell structures. J Mater Sci2005; 40: 5859–5866.
33.
SmithMGuanZCantwellWJ. Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique. Int J Mech Sci2013; 67: 28–41.
34.
Abaqus 2018 documentation, 2018.
35.
CansizogluOHarryssonOCormierD, et al.An evaluation of non-stochastic lattice structures fabricated via electron beam melting. Mater Sci Eng A2008; 492: 468–474.
36.
DelroissePJacquesPJMaireE, et al.Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting. Scr Mater2017; 141: 32–35.
37.
AmaniYDancetteSDelroisseP, et al.Compression behavior of lattice structures produced by selective laser melting: x-ray tomography based experimental and finite element approaches. Acta Mater2018; 159: 395–407.
