In this work, the influence of microwave sintering time and temperature on the microstructure characterisation, and thermal and mechanical behaviours of Ti–30Ta were investigated. The relative densities of Ti–30Ta samples were in the range of 65–72% and as the sintering times/temperatures increased, the relative density decreased. The pore size averages were in the range of 6–17 µm with different sintering parameters, for instance the smallest pore size of 6.8 µm was observed after being sintered at 900 ℃ for 30 min (Ta2). Two morphologies of plate-like (P) and needle-like (N) structures were observed, as well as two regions – dark region (Ti-rich region) and bright region (Ta-rich region), also two phases – β and α. The DSC results revealed that the Ms to Mf transformation range was 98.86 to 80.5 ℃, respectively, while the range of As to Af transformation was about −22.35 to 92 ℃, respectively. The maximum fracture strength and its strain were acquired in the sintered sample of 900 ℃ for 30 min. The total strain recovery (ɛT) was improved linearly as the sintering temperature increased, correspondingly, the best ɛT was implied in Ti–Ta shape memory alloys after being sintered at 1000 ℃ for 30 min (Ta4).
BhattacharyaK. Microstructure of martensite: why it forms and how it gives rise to the shape-memory effect, Oxford: Oxford University Press, 2003.
2.
Tang SM, Chung CY and Liu WG. Preparation of Cu-AI-Ni-based shape memory alloys by mechanical alloying and powder metallurgy method. J Mater Process Technol1997; 63: 307–312.
3.
IbarraAJuanJSBocanegraEH, et al.Thermo-mechanical characterization of Cu–Al–Ni shape memory alloys elaborated by powder metallurgy. Mater Sci Eng A2006; 438–440: 782–786.
4.
SuryanarayanaC. Mechanical alloying and milling. Prog Mater Sci2001; 46: 1–184.
5.
LuWYangLYanB, et al.Nanocrystalline Fe84Nb7B9 alloys prepared by mechanical alloying and ultra-high-pressure consolidation. J Alloys Compd2006; 413: 85–89.
6.
MannaIChattopadhyayPPBanhartF, et al.Solid state synthesis of amorphous and/or nanocrystalline Al40Zr40Si20 alloy by mechanical alloying. Mater Lett2004; 58: 403–407.
7.
PourkhorshidiSParvinNKenevisiM, et al.A study on the microstructure and properties of Cu-based shape memory alloy produced by hot extrusion of mechanically alloyed powders. Mater Sci Eng A2012; 556: 658–663.
8.
VajpaiSDubeRSangalS. Application of rapid solidification powder metallurgy processing to prepare Cu–Al–Ni high temperature shape memory alloy strips with high strength and high ductility. Mater Sci Eng A2013; 570: 32–42.
9.
VajpaiSKDubeRKSangalS. Microstructure and properties of Cu–Al–Ni shape memory alloy strips prepared via hot densification rolling of argon atomized powder preforms. Mater Sci Eng A2011; 529: 378–387.
10.
PortierRA, et al.Spark plasma sintering of Cu–Al–Ni shape memory alloy. J Alloys Compd2013; 577: S472–S477.
11.
XiongJLiYWangX, et al.Titanium–nickel shape memory alloy foams for bone tissue engineering. J Mech Behav Biomed Mater2008; 1: 269–273.
12.
ZhuSYangXHuF, et al.Processing of porous TiNi shape memory alloy from elemental powders by Ar-sintering. Mater Lett2004; 58: 2369–2373.
13.
YuanBChungCZhangX, et al.Control of porosity and superelasticity of porous NiTi shape memory alloys prepared by hot isostatic pressing. Smart Mater Struct2005; 14: S201–S201.
14.
BahadorA, et al.Effect of deformation on the microstructure, transformation temperature and superelasticity of Ti–23 at% Nb shape-memory alloys. Mater Des2017; 118: 152–162.
15.
BahadorA, et al.Microstructure and superelastic properties of free forged Ti–Ni shape-memory alloy. Trans Nonferrous Met Soc China2018; 28: 502–514.
16.
ShishkovskyIVolovaLKuznetsovM, et al.Porous biocompatible implants and tissue scaffolds synthesized by selective laser sintering from Ti and NiTi. J Mater Chem2008; 18: 1309–1317.
17.
TosunGOzlerLKayaM, et al.A study on microstructure and porosity of NiTi alloy implants produced by SHS. J Alloys Compd2009; 487: 605–611.
18.
BansiddhiADunandDC. Shape-memory NiTi foams produced by solid-state replication with NaF. Intermetallics2007; 15: 1612–1622.
19.
AydogTBorŞ. Superelasticity and compression behavior of porous TiNi alloys produced using Mg spacers. J Mech Behav Biomed Mater2012; 15: 59–69.
20.
BansiddhiADunandDC. Shape-memory NiTi foams produced by replication of NaCl space-holders. Acta Biomater2008; 4: 1996–2007.
21.
OghbaeiMMirzaeeO. Microwave versus conventional sintering: a review of fundamentals, advantages and applications. J Alloys Compd2010; 494: 175–189.
22.
DasSMukhopadhyayAKDattaS, et al.Prospects of microwave processing: an overview. Bulletin Mater Sci2009; 32: 1–13 (in English).
23.
XuJ, et al.Effect of pore sizes on the microstructure and properties of the biomedical porous NiTi alloys prepared by microwave sintering. J Alloys Compd2015; 645: 137–142.
24.
LuoSDBettlesCJYanM, et al.Microwave sintering of titanium. Key Eng Mater2010; 436: 141–147.
25.
IbrahimMKHamzahESaudSN. Microstructure, phase transformation, mechanical behavior, bio-corrosion and antibacterial properties of Ti-Nb-xSn (x= 0, 0.25, 0.5 and 1.5) SMAs. J Mater Eng Perform2019; 28: 382–393.
26.
IbrahimMKHamzahENazimE, et al.Parameter optimization of microwave sintering porous Ti-23% Nb shape memory alloys for biomedical applications. Trans Nonferrous Met Soc China2018; 28: 700–710.
27.
IbrahimMKHamzahESaudSN, et al.Effect of Sn additions on the microstructure, mechanical properties, corrosion and bioactivity behaviour of biomedical Ti–Ta shape memory alloys. J Therm Anal Calorim2018; 131: 1165–1175.
28.
TangCZhangLWongC, et al.Fabrication and characteristics of porous NiTi shape memory alloy synthesized by microwave sintering. Mater Sci Eng A2011; 528: 6006–6011.
29.
ZhangYYuanBZengM, et al.High porosity and large pore size shape memory alloys fabricated by using pore-forming agent (NH4HCO3) and capsule-free hot isostatic pressing. J Mater Process Technol2007; 192: 439–442.
30.
SadrnezhaadSKLashkariO. Property change during fixtured sintering of NiTi memory alloy. Mater Manuf Process2006; 21: 87–96.
31.
KimY-WLeeY-JNamT-H. Shape memory characteristics of Ti–Ni–Mo alloys sintered by sparks plasma sintering. J Alloys Compd2013; 577: S205–S209.
32.
BeckerWLampmanS. Fracture appearance and mechanisms of deformation and fracture, Materials Park, OH: ASM International, 2002, pp. 559–586.
33.
Padula IiSShyamARitchieR, et al.High frequency fatigue crack propagation behavior of a nickel-base turbine disk alloy. Int J Fatigue1999; 21: 725–731.
34.
de SouzaKARobinA. Preparation and characterization of Ti–Ta alloys for application in corrosive media. Mater Lett2003; 57: 3010–3016.
35.
HonY-HWangJ-YPanY-N. Composition/phase structure and properties of titanium-niobium alloys. Mater Trans2003; 44: 2384–2390.
36.
HanM-KKimJ-YHwangM-J, et al.Effect of Nb on the microstructure, mechanical properties, corrosion behavior, and cytotoxicity of Ti-Nb alloys. Materials2015; 8: 5986–6003.
37.
NaidooMRaethelJSigalasI, et al.Preparation of (Ti, Ta)–(C, N) by mechanical alloying. Int J Refract Metals Hard Mater2012; 35: 178–184.
38.
NaidooMJohnsonOSigalasI, et al.Preparation of Ti–Ta–(C, N) by mechanical alloying Ti (C, N) and TaC. Int J Refract Metals Hard Mater2013; 37: 67–72.
39.
LiuY, et al.Synthesis of Ti–Ta alloys with dual structure by incomplete diffusion between elemental powders. J Mech Behav Biomed Mater2015; 51: 302–312.
40.
AkinFAZreiqatHJordanS, et al.Preparation and analysis of macroporous TiO2 films on Ti surfaces for bone–tissue implants. J Biomed Mater Res2001; 57: 588–596.
41.
MourM, et al.Advances in porous biomaterials for dental and orthopaedic applications. Materials2010; 3: 2947–2974.
42.
BansiddhiASargeantTStuppSI, et al.Porous NiTi for bone implants: a review. Acta Biomater2008; 4: 773–782.
43.
RyanGPanditAApatsidisDP. Fabrication methods of porous metals for use in orthopaedic applications. Biomaterials2006; 27: 2651–2670.
44.
GittensRA, et al.The effects of combined micron-/submicron-scale surface roughness and nanoscale features on cell proliferation and differentiation. Biomaterials2011; 32: 3395–3403.
45.
BahadorAKariyaSUmedaJ, et al.Tailoring microstructure and properties of a superelastic Ti–Ta alloy by incorporating spark plasma sintering with thermomechanical processing. J Mater Eng Perform2019; 28: 3012–3020.
46.
KolliRPJoostWJAnkemS. Phase stability and stress-induced transformations in beta titanium alloys. JOM2015; 67: 1273–1280.
47.
Ehtemam-HaghighiSLiuYCaoG, et al.Influence of Nb on the β→ α″ martensitic phase transformation and properties of the newly designed Ti–Fe–Nb alloys. Mater Sci Eng C2016; 60: 503–510.
48.
BuenconsejoPJSKimHYHosodaH, et al.Shape memory behavior of Ti–Ta and its potential as a high-temperature shape memory alloy. Acta Mater2009; 57: 1068–1077.
49.
ZhengXSuiJZhangX, et al.Effect of Y addition on the martensitic transformation and shape memory effect of Ti–Ta high-temperature shape memory alloy. J Alloys Compd2012; 539: 144–147.
50.
ZhengX, et al.Thermal stability and high-temperature shape memory effect of Ti–Ta–Zr alloy. Scripta Mater2013; 68: 1008–1011.
51.
XuJ, et al.Microstructure, mechanical properties and superelasticity of biomedical porous NiTi alloy prepared by microwave sintering. Mater Sci Eng C2015; 46: 387–393.
52.
YangDGuoZShaoH, et al.Mechanical properties of porous Ti-Mo and Ti-Nb alloys for biomedical application by gelcasting. Procedia Eng2012; 36: 160–167.
53.
GeethaMSinghAAsokamaniR, et al.Ti based biomaterials, the ultimate choice for orthopaedic implants – a review. Prog Mater Sci2009; 54: 397–425.
54.
NagelsJStokdijkMRozingPM. Stress shielding and bone resorption in shoulder arthroplasty. J Shoulder Elbow Surg2003; 12: 35–39.
