Electric discharge machining using rapid manufactured complex shape copper electrode: Parametric analysis and process optimization for material removal rate,electrode wear rate and cavity dimensions

Abstract

The present investigation addresses the machining outcome of electric discharge machining using a rapid manufactured complex shape copper electrode. Developed rapid manufacturing technique using an amalgamation of polymer 3D printing and pressureless sintering of loose powder as rapid tooling has been used to fabricate copper electrode from the computer-aided design model of the desired shape. The fabricated electrode was used for the electric discharge machining of the D-2 steel workpiece. Central composite design was employed to study the electric discharge machining parameters (pulse duration, duty cycle and peak current) effect on the electric discharge machining characteristics such as material removal rate, electrode wear rate and cavity dimensional deviation as overcut from electrode computer-aided design model. Analysis of variance was executed to attain significant parameters along with interactions. Peak current was found to be the utmost dominating parameter for three responses. The high percentage of carbon was observed on the electrode surface after electric discharge machining at the high level of pulse duration and resulted in low electrode wear rate. The high percentage of dimensional deviation was noticed at the maximum duty cycle and maximum peak current by the substantial interactions. Genetic algorithm-based multi-objective optimization was employed for the electric discharge machining parameters optimization to maximize material removal rate, minimize electrode wear rate and dimensional deviation. The multi-feature complex copper electrode was fabricated and used for electric discharge machining as the case study to check the efficacy of the optimized process. It was witnessed that the process was competent to fabricate complex shape cavity as per the desired computer-aided design model shape with efficient material removal rate and electrode wear rate.

Keywords

3D printing rapid tooling copper electrode response surface methodology electric discharge machining optimization dimensional deviation

Get full access to this article

View all access options for this article.

References

Langlois R and McKinley C. Build an EDM: electrical discharge machining, removing metal by spark erosion. New York, NY: Village Press, 1997.

Gupta

. Developments in nonconventional machining for sustainable production: a state-of-the-art review. Proc IMechE, Part C: J Mechanical Engineering Science 2019; 233: 4213–4232.

Rajurkar

Shen

. High aspect ratio and complex shaped blind micro holes by micro EDM. CIRP Ann – Manuf Technol 2002; 51: 359–362.

Hopkinson

Dickens

Hague

. Rapid manufacturing: an industrial revolution for the digital age, Hoboken, NJ: John Wiley & Sons, 2006.

Singh

Ramakrishna

Singh

. Material issues in additive manufacturing: a review. J Manuf Process 2017; 25: 185–200.

Singhal

Jain

Pandey

, et al. Optimum part deposition orientation for multiple objectives in SL and SLS prototyping. Int J Prod Res 2009; 47: 6375–6396.

Pogson

Fox

Sutcliffe

, et al. The production of copper parts using DMLR. Rapid Prototyp J 2003; 9: 334–343.

Zhu

Fuh

JYH

. Development and characterisation of direct laser sintering Cu-based metal powder. J Mater Process Technol 2003; 140: 314–317.

Scudino

Unterdörfer

Prashanth

, et al. Additive manufacturing of Cu-10Sn bronze. Mater Lett 2015; 156: 202–204.

10.

Tang

Fuh

JYH

, et al. Formation of electrical discharge machining electrode via laser cladding. Rapid Prototyp J 2002; 8: 315–319.

11.

Dürr

Pilz

Eleser

. Rapid tooling of EDM electrodes by means of selective laser sintering. Comput Ind 1999; 39: 35–45.

12.

Amorim

Lohrengel

Müller

, et al. Performance of sinking EDM electrodes made by selective laser sintering technique. Int J Adv Manuf Technol 2013; 65: 1423–1428.

13.

Czelusniak

Amorim

Higa

, et al. Development and application of new composite materials as EDM electrodes manufactured via selective laser sintering. Int J Adv Manuf Technol 2014; 72: 1503–1512.

14.

Prakash

Singh

Pruncu

, et al. Surface modification of Ti-6Al-4V alloy by electrical discharge coating process using partially sintered Ti-Nb electrode. Materials (Basel) 2019; 12: pii: E1006.

15.

Dimla

Hopkinson

Rothe

. Investigation of complex rapid EDM electrodes for rapid tooling applications. Int J Adv Manuf Technol 2004; 23: 249–255.

16.

Singh

Ahuja

IPS

. On development of functionally graded material through fused deposition modelling assisted investment casting from Al₂ O₃/SiC reinforced waste low density polyethylene. Trans Indian Inst Met 2018; 71: 2479–2485.

17.

Rennie

AEW

Bocking

Bennett

. Electroforming of rapid prototyping mandrels for electro-discharge machining electrodes. J Mater Process Technol 2001; 110: 186–196.

18.

Yang

Leu

. Integration of rapid prototyping and electroforming for tooling application. CIRP Ann – Manuf Technol 1999; 48: 119–122.

19.

Gillot

Mognol

Furet

. Dimensional accuracy studies of copper shells used for electro-discharge machining electrodes made with rapid prototyping and the electroforming process. J Mater Process Technol 2005; 159: 33–39.

20.

Bai

Williams

. An exploration of binder jetting of copper. Rapid Prototyp J 2015; 21: 177–185.

21.

Bai

Wagner

Williams

. Effect of particle size distribution on powder packing and sintering in binder jetting additive manufacturing of metals. J Manuf Sci Eng 2017; 139: 1–6.

22.

Yan

Wang

Xiong

, et al. Thermal debinding mass transfer mechanism and dynamics of copper green parts fabricated by an innovative 3D printing method. RSC Adv 2018; 8: 10355–10360.

23.

Ren

Zhou

Song

, et al. Process parameter optimization of extrusion-based 3D metal printing utilizing PW-LDPE-SA binder system. Materials (Basel) 2017; 10: pii: E305.

24.

Singh

Pandey

. Ultrasonic assisted pressureless sintering for rapid manufacturing of complex copper components. Mater Lett 2019; 236: 276–280.

25.

Singh

Pandey

. Uniform and graded copper open cell ordered foams fabricated by rapid manufacturing: surface morphology, mechanical properties and energy absorption capacity. Mater Sci Eng A 2019; 761: 138035.

26.

Singh

Pandey

. Experimental investigations into mechanical and thermal properties of rapid manufactured copper parts. Proc IMechE, Part C: J Mechanical Engineering Science 2019; 234: 82–95.

27.

Pandey

Singh

. Effect of unit cell shape and strut size on flexural properties of ordered Copper foam. Int J Eng Sci 2019; 12: 73–79.

28.

Singh G and Pandey PM. Design and analysis of long-stepped horn for ultrasonic assisted sintering. In: 21st international conference on advances in materials and processing technology (AMPT), Dublin, Ireland, 2018.

29.

Singh

Pandey

. Topological ordered copper graphene composite foam: fabrication and compression properties study. Mater Lett 2019; 257: 126712.

30.

Singh

Pandey

. Rapid manufacturing of copper components using 3D printing and ultrasonic assisted pressureless sintering: experimental investigations and process optimization. J Manuf Process 2019; 43: 253–269.

31.

Singh

Pandey

. Process optimization for rapid manufacturing of complex geometry electrical discharge machining electrode. Proc IMechE, Part C: J Mechanical Engineering Science 2019; 234: 66–81.

32.

Yan

Zou

, et al. Pressureless bonding process using Ag nanoparticle paste for flexible electronics packaging. Scr Mater 2012; 66: 582–585.

33.

Gupta

Sood

Sharma

. Machining parameters optimization of titanium alloy using response surface methodology and particle swarm optimization under minimum-quantity lubrication environment. Mater Manuf Process 2016; 31: 1671–1682.

34.

Mulik

Pandey

. Experimental investigations and modeling of finishing force and torque in ultrasonic assisted magnetic abrasive finishing. J Manuf Sci Eng 2012; 134: 1–12.

35.

Beravala

Pandey

. Experimental investigations to evaluate the effect of magnetic field on the performance of air and argon gas assisted EDM processes. J Manuf Process 2018; 34: 356–373.

36.

German R. Sintering: from empirical observations to scientific principles, 2014, Oxford, UK: Butterworth-Heinemann.

37.

Newman

. State of the art electrical discharge machining (EDM). Int J Mach Tools Manuf 2003; 43: 1287–1300.

38.

Habib

. Study of the parameters in electrical discharge machining through response surface methodology approach. Appl Math Model 2009; 33: 4397–4407.

39.

Jabbaripour

Sadeghi

Faridvand

, et al. Investigating the effects of EDM parameters on surface integrity, MRR and TWR in machining of Ti-6Al-4V. Mach Sci Technol 2012; 16: 419–444.

40.

Chen

Mahdavian

. Parametric study into erosion wear in a computer numerical controlled electro-discharge machining process. Wear 1999; 236: 350–354.

41.

Pradhan

. Estimating the effect of process parameters on MRR, TWR and radial overcut of EDMed AISI D2 tool steel by RSM and GRA coupled with PCA. Int J Adv Manuf Technol 2013; 68: 591–605.

42.

Choudhary

Kumar

Gupta

, et al. Mathematical modeling and intelligent optimization of submerged arc welding process parameters using hybrid PSO-GA evolutionary algorithms. Neural Comput Appl 2019, pp. 1–14. DOI: 10.1007/s00521-019-04490-5.

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.00 MB

0.42 MB