Use of 1D mechanical and thermal models to predetermine the heat transferable by a thermal interface material layer in space applications

Abstract

This paper proposes the use of 1D basic models to build a design assistance tool capable of evaluating the heat transfer between a third-level electronic packaging and its support, considering a conventional configuration where a thermal interface material is placed between these two parts. Using this kind of tool early in the design process may facilitate choices concerning geometry and material. The packaging is modelled by a stepped beam (the equipment) and the interface layer by a nonlinear elastic foundation (the thermal interface material). Considering that the electronic equipment bends under the effect of the forces exerted by the fasteners, the tool makes it possible to determine the contact zone remaining operative after deformation, and the pressure distribution at the interface. Mechanical results are then used to calculate the steady-state heat transfer between the equipment and its support, taking into account the diffusion within the equipment and the thermal interface material, and also the thermal contact resistances, the latter being dependent on the contact pressure. A detailed case study is used to illustrate the utility of the approach. The 1D models are exploited to illustrate the interest of the design assistance tool. The influence of different parameters on the thermal performance is studied and a new innovative proposal is analyzed, which could lead to a significant increase in thermal performance.

Keywords

Thermal interface materials thermal contact resistance estimation of contact surface 1D mechanical and thermal models thermal performance design assistance tool

Get full access to this article

View all access options for this article.

References

Pecht M. Handbook of electronic package design. Bacon Raton, FL: CRC Press.

Wang

Xie

. Experimental study of the effects of the thermal contact resistance on the performance of thermoelectric generator. Appl Therm Eng 2018; 130: 847–853.

Spaceborne S-band solid state power amplifier - general dynamics mission systems, http://gdmissionsystems.com/products/communications/spaceborne-communications/mission-data-links/s-band-solid-state-power-amplifier (accessed 27 August 2018).

Prasher

. Thermal interface materials: historical perspective, status, and future directions. Proc IEEE 2006; 94: 1571–1586.

European Cooperation for Space Standardization. ECSS-Q-ST-70-02C – Thermal vacuum outgassing test for the screening of space materials (15 November 2008). ESA Requirements and Standards Division, ESTEC, AG Noordwijk, The Netherlands.

Yovanovich

. Four decades of research on thermal contact, gap, and joint resistance in microelectronics. IEEE Transact Components Packag Technol 2005; 28: 182–206.

Bahrami

Culham

Yananovich

, et al. Review of thermal joint resistance models for nonconforming rough surfaces. Appl Mech Rev 2006; 59: 1.

Yovanovich MM and Marotta EE. Thermal spreading and contact resistances. In: Heat transfer handbook 2003; 1: 261–394.

Lasance

CJM

. How to estimate heat spreading effects in practice. J Electron Packag 2010; 132: 031004-031004–7.

10.

Nakayama

. Study on heat conduction in a simulated multicore processor chip—Part II: case studies. J Electron Packag 2013; 135: 021003-021003–16.

11.

Cheng

Zhou

Liu

, et al. Thermo-mechanical coupling analysis of a high-speed actuating mechanism based on a new thermal contact resistance model. Appl Therm Eng 2018; 140: 487–497.

12.

Liu

D-S

C-Y

Chen

C-Y

. Integrated design method for Ip chip CSP with electrical, thermal and thermo-mechanical qualifications. Finite Elements Analysis Des 2003, pp. 39: 661–677 .

13.

Sartre

Lallemand

. Enhancement of thermal contact conductance for electronic systems. Appl Thermal Eng 2001; 21: 221–235.

14.

Singh

Sørensen

Condra

. Influence of the degree of thermal contact in fin and tube heat exchanger: a numerical analysis. Appl Therm Eng 2016; 107: 612–624.

15.

Bendada

Derdouri

Lamontagne

, et al. Analysis of thermal contact resistance between polymer and mold in injection molding. Appl Therm Eng 2004; 24: 2029–2040.

16.

Steven

, et al. An evolutionary approach to elastic contact optimization of frame structures. Finite Elements Analysis Des 2003; 40: 61–81.

17.

Basaran

Desai

Kundu

. Thermomechanical finite element analysis of problems in electronic packaging using the disturbed state concept: Part 1—theory and formulation. J Electron Packag 1998; 120: 41–47.

18.

Hetenyi M. Beams on elastic foundation; theory with applications in the fields of civil and mechanical engineering. Ann Arbor: The University of Michigan Press, 1946.

19.

Vandevelde

Daidié

Sartor

. Evaluation and Optimization of Heat Transfer at the Interfaces of Spacecraft Assemblies. CEAS Space J 2018.

20.

Beaufait

Hoadley

. Analysis of elastic beams on nonlinear foundations. Comput Struct 1980; 12: 669–676.

21.

Çengel YA. Heat transfer: a practical approach. New York, NY: McGraw-Hill, 2003.

22.

Thomas JW. Numerical partial differential equations: finite difference methods. New York, NY: Springer Science & Business Media.

23.

Carrino

Nicassio

Scarselli

, et al. Finite difference model of wave motion for structural health monitoring of single lap joints. Int J Solids Struct 2019; 161: 219–227.

24.

Sarens

Verstraeten

Glorieux

, et al. Investigation of contact acoustic nonlinearity in delaminations by shearographic imaging, laser Doppler vibrometric scanning and finite difference modeling. IEEE Transact Ultrasonics Ferroelectrics Frequency Control 2010; 57: 1383–1395.

25.

Sponagle

Groulx

. Measurement of thermal interface conductance at variable clamping pressures using a steady state method. Appl Therm Eng 2016; 96: 671–681.

26.

Savija

Culham

Yovanovich

, et al. Review of thermal conductance models for joints incorporating enhancement materials. J Thermophys Heat Transfer 2003; 17: 43–52.

27.

Bahrami

Yovanovich

Marotta

. Thermal joint resistance of polymer-metal rough interfaces. J Electron Packag 2006; 128: 23–29.

28.

Xian

Zhang

Zhai

, et al. Experimental characterization methods for thermal contact resistance: a review. Appl Therm Eng 2018; 130: 1530–1548.

29.

Zhao

Qian

, et al. Measurement techniques for thermal conductivity and interfacial thermal conductance of bulk and thin film materials. J Electron Packag 2016; 138: 040802-040802–19.