Research and application of variable DOF compliant five-bar mechanism based on novel compliant torsion joint in vehicle side door latch

Abstract

In this paper, a novel compliant joint with torsion spring (CJTS) is proposed in order to realize the power release (Note: The “power release” feature means that the closure system with a latch assembly including a pawl-ratchet release mechanism is controlled by at least one electric actuator.) feature of the vehicle side door latch. A new type of variable degree of freedom (DOF) compliant five-bar mechanism (VDCM) based on the novel compliant joint is constructed. The novel compliant mechanism is characterized by multiple motion modes of planar five-bar mechanism and four-joint, crank-shaper, crank-oscillating block mechanism. These motion modes can be switched through the different choices of driving joints and limiting stoppers. This compliant mechanism is effectively implanted into a vehicle side door latch as a sub-branch to perform power release function. The force-adaptive characteristic of the VDCM ensures compatibility with extant manual release branches. Drifting displacement of the CJTS’s torsion spring rotation center in the groove is proposed as a compliant index to describe the compatibility and force-adaptive characteristics under various working modes. The relationship between torsion spring stiffness and mechanism characteristic point motion trajectory or position recovery time duration or motion accuracy is studied. The results show that the introduction of compatibility and force-adaptive characteristics is able to reduce the shaking forces exerted on the mechanism frame. The shaking forces will be further reduced by changing equivalent mass center position of the component. Furthermore, the practicability of the novel compliant mechanism is experimentally validated on the force-displacement test platform. The work in this paper provides a reference for the multi-mode motion mechanical design in a confined space of the latch.

Keywords

Vehicle side door latch power release compliant joint with torsion spring variable DOF compliant five-bar mechanism force-adaptive shaking force

Get full access to this article

View all access options for this article.

References

Campbell

. Rollover, ejection, and the potential effectiveness of restraints in heavy-truck occupant fatalities. In: Truck & Bus Meeting & Exposition, Indianapolis, Indiana 8–11 November 1982, pp. 1–8.

Kotwal

Womack

Nelson

. Evaluating latch system ease of use and key features in new vehicles, Washington: AAA Foundation for Traffic Safety, 2013.

Suholutskaja E. Actuation device for a motor vehicle lock. Germany, Europe, EP 3353361 A1, 2018.

Franco GO, Francesco C and Marco T. Dual motor latch assembly with power cinch and power release having soft opening function. The United States, US 2016/0244999 A1, 2016.

Auger M, Plourde L and Trumbore M. Innovative door design for commercial vehicles. SAE Technical Paper 1: 2411, 2014.

Nelsen J and Seo C. An improved methodology for calculation of the inertial resistance of automotive latching systems. SAE Technical Paper 1: 0544, 2014.

Lee

. Research on the mechanism of automobile door locks and its control system, Nanjing: Nanjing University of Aeronautics and Astronautics, 2009.

Daniel IU and Eugen N. Construction and kinematics of automotive side door latch mechanisms. SAE Technical Paper 1: 0881, 2005.

Deb

Sen

. Parametric study of the behavior of double toggle switching mechanisms. Mech Mach Theory 2013; 63: 8–27.

10.

Russell

Sodhi

. On the design of slider-crank mechanisms. Part I: multi-phase motion generation. Mech Mach Theory 2005; 40: 285–299.

11.

Wohlhart K. Kinematotropic linkages. In: 5th international symposium on advances in robot kinematics. Liberec: Kluwer Academic Publishers, 1996, pp.359–368.

12.

Dai

Jones

. Mobility in metamorphic mechanisms of foldable/erectable kinds. J Mech Des 1999; 121: 375–382.

13.

Guo

Yang

. Topological type analysis of the variable freedom mechanism based on the metamorphic principle. China Mech Eng 2005; 16: 1–3.

14.

Ehlig J, Hanke U and Lovasz EC. Geometrical synthesis approach for compliant mechanisms – design of applications exploiting fibre reinforced material characteristics. In: Victor P, Charles P, Erwin-Christian L (eds) New advances in mechanisms, transmissions and applications. Dordrecht: Springer, 2013, pp.215–223.

15.

Tanik

. Analysis and design of an underactuated compliant five-bar mechanism. Mech Mach Theory 2016; 102: 123–134.

16.

Andrysek

Leineweber

Lee

. Development and evaluation of a mechanical stance-controlled orthotic knee joint with stance flexion. J Mech Des 2017; 139: 035001–035007.

17.

Liu

Wang

. Payload compliance and its design theory for thruster mechanisms of shield machines. J Mech Eng 2014; 50: 60–68.

18.

Opdahl PG, Jensen BD and Howell LL. An investigation into compliant bistable mechanisms. In: Proceedings of the ASME design engineering technical conference, Atlanta, USA, 13–16 September 1998, pp.1–10. New York: ASME.

19.

Choi

Lee

Choi

. Stochastic linkage modeling for mechanical error analysis of planar mechanisms. J Struct Mech 1998; 26: 20–20.

20.

Hubbard NB, Wittwer JW, Kennedy JA, et al. A novel fully compliant planar linear-motion mechanism. In: ASME international design engineering technical conferences & computers & information in engineering conference, Utah, USA, 28 September–2 October 2004, pp. 1–5. New York: ASME.

21.

Paine N, Oh S and Sentis L. Design and control considerations for high-performance series elastic actuators. In: IEEE/ASME Trans Mechatron 2014; 19: 1080–1091.

22.

Lee

Hao

. Nonlinear behaviour design using the kinematic singularity of a general type of double-slider four-bar linkage. Mech Mach Theory 2018; 129: 106–130.

23.

Yang

Liu

. Study of zero stiffness flexural pivot based on spring-crank mechanism. J Mech Eng 2018; 54: 86–93.

24.

Kim

Lee

Park

. Compliant joint actuator with dual spiral springs. IEEE/ASME Trans Mechatron 2013; 18: 1839–1844.

25.

Venkataramanujam

Larochelle

. Design and development of planar reconfigurable motion generators. Mech Based Des Struct Mach 2015; 44: 150930130718006–150930130718006.

26.

Shin

Lee

Kim

. A robot finger design using a dual-mode twisting mechanism to achieve high-speed motion and large grasping force. IEEE Trans Rob 2012; 28: 1398–1405.

27.

Plooij M and Wisse M. A novel spring mechanism to reduce energy consumption of robotic arms. In: 2012 IEEE/RSJ international conference on intelligent robots and Systems (IROS). New York: IEEE, 2012.

28.

Meijaard

van der Wijk

. On the dynamic balance of a planar four-bar mechanism with a flexible coupler. Adv Mech Mach Sci Mech Mach Sci 2019; 73: 3037–3046.

29.

Kalas VJ. Shaking force balance in parallel manipulators with flexible links. Master Thesis, report WA-1588, Laboratory of Mechanical Automation and Mechatronics, Faculty of Engineering Technology, University of Twente, Enschede, 2016.

30.

Sébastien

Arakelian

. Complete shaking force and shaking moment balancing of in-line four-bar linkages by adding a class-two RRR or RRP Assur Group. Mech Mach Theory 2012; 57: 13–26.

31.

Lee

. Theory and application of the mechanism conformation change being based on transforming factor control. J Mech Eng 2005; 41: 41–45.

32.

Merriam

Howell

. Non-dimensional approach for static balancing of rotational flexures. Mech Mach Theory 2015; 84: 90–98.

33.

Tagliamonte

Sergi

Accoto

. Double actuation architectures for rendering variable impedance in compliant robots: a review. Mechatronics 2012; 22: 1187–1203.

34.

Wang

Hang

Huang

. A new type of straight beam flexure hinge with porous structure. Mech Sci Technol Aerosp Eng 2019; 39: 102–108.

35.

Hang LB, Bai LL, Wang MY, et al. A new type of power release vehicle side door latch with variable DOF compliant joint. Pattern 201910233989.3, China, 2019.

36.

Arakelian

Smith

. Erratum. Shaking force and shaking moment balancing of mechanisms: a historical review with new examples. J Mech Des 2005; 127: 334–339.

37.

Walker

Haines

. A study of counterweight synthesis for a 6-bar chain. Mech Mach Theory 1982; 17: 327–334.