This paper proposes a novel design methodology for electric-bus structures by implementing the finite element method via ABAQUS™ and linear programming via MATLAB™. A monocoque sandwich-structured fiber-reinforced composite bus with a maximum driving range of 300 km is conceived using the proposed methodology. The bus-body structure is designed based on safety criteria such as vehicle registration regulations, the strength of the bus structure under various driving conditions, bending- and torsion-stiffness requirements, and the rollover testing standard of UN ECE R66. A procedure developed to systematically conduct parametric studies by varying the core and face thicknesses of the sandwich structure of each component is presented. Multivariate functions are formulated to determine the correlations of structural responses with changes in geometric parameters. Linear programming is implemented to minimize the mass of the bus structure under design constraints. The proposed monocoque bus structure meets all requirements, and its body mass is 63.3% less than the benchmark value.
CroccoloDAgostinisMDVincenziN. Structural analysis of an articulated urban bus chassis via finite element method: a methodology applied to a case study. J Mech Eng2011; 57: 799–809.
3.
Kunakron-ong P, Ruangjirakit K and Jongpradist P. Design and analysis of electric bus structure in compliance with ECE safety regulation. In: 2nd IEEE international conference on intelligent transportation engineering (ICITE), Singapore, 1–3 September 2017, pp.25–29.
4.
JainRTandonPVasanthaK. Optimization methodology for beam gauges of the bus body for weight reduction. Appl Comput Mech2014; 8: 47–62.
5.
Emmons JB and Blessing LJ. Ultralight stainless steel urban bus concept. SAE technical paper 2001-01-2073, 2001.
6.
Uttamung P, Benyajati C and Soparat J. Light weight optimisation of electric bus body structure using finite element method. In: 7th TSME international conference on mechanical engineering, Chiang Mai, Thailand, 13–16 December 2016.
7.
KoHYShinKBJeonKW, et al.A study on the crashworthiness and rollover characteristics of low-floor bus made of sandwich composites. J Mech Sci Technol2009; 23: 2686–2693.
8.
Testoni O. Concept and preliminary design for a composite monocoque for an electric city-bus. Master Thesis, ETH Zurich, Switzerland, 2015.
9.
GauchiaADiazVBoadaMJL, et al.Torsional stiffness and weight optimization of a real bus structure. Int J Autom Technol2010; 11: 41–47.
10.
LiangCCLeGN. Bus rollover crashworthiness under European standard: an optimal analysis of superstructure strength using successive surface method. Int J Crashworthiness2010; 14: 623–639.
11.
Kunakorn-ongPJongpradistP. Optimisation of bus superstructure for rollover safety according to ECE-R66. Int J Autom Technol2020; 21: 215–225.
12.
VeleaMNWennhagePZenkertD. Multi-objective optimisation of vehicle bodies made of FRP sandwich structures. Compos Struct2014; 111: 75–84.
13.
HouSLiuTDongD, et al.Factor screening and multivariable crashworthiness optimization for vehicle side impact by factorial design. Struct Multidisc Optim2014; 49: 147–167.
14.
LeiSRen-JyeYPingZ. An adaptive response surface method for crashworthiness optimization. Eng Optim2013; 45: 1365–1377.
15.
PohlakMMajakJKarjustK, et al.Multi-criteria optimization of large composite parts. Compos Struct2010; 92: 2146–2152.
16.
DuddeckF. Multidisciplinary optimization of car bodies. Struct Multidisc Optim2008; 35: 375–389.
17.
CavazzutiMBaldiniABertocchiE, et al.High performance automotive chassis design: a topology optimization based approach. Struct Multidisc Optim2011; 44: 45–56.
18.
WangDCaiK. Optimizing the static–dynamic performance of the body-in-white using a modified non-dominated sorting genetic algorithm coupled with grey relational analysis. Eng Optim2018; 50: 615–633.
19.
Regulation No 66 of the Economic Commission for Europe of the United Nations. Large passenger vehicles with regard to the strength of their superstructure.
20.
BYD electric bus, www.byd.com (accessed 2 April 2018).
MalenDE. Fundamentals of automobile body structure design, Warrendale, PA: SAE International, 2011, pp. 121–182.
30.
Benyajati C, Lapapong S, Pimsarn M, et al. Finite element analysis of an electric bus body structure in real driving conditions. In: 3rd TSME international conference on mechanical engineering, Chiang Rai, Thailand, 24–27 October 2012.
