A conventional parallel manipulator is characterized by connecting one moving platform with two or more serial kinematic limbs. Since each limb is independently supporting one moving platform, the moving platform must be a rigid body with several kinematic pairs fixed on it. However, for generalized parallel manipulators with articulated moving platforms, the moving platforms are not limited to rigid bodies but including serial kinematic chains or internal kinematic joints. The introduction of articulated moving platforms allows for improving the kinematic performance of generalized parallel manipulators, especially for rotational capability. On account of the structural characteristics of the moving platforms, it also poses a significant challenge in the construction of the structures of manipulators. This research raises a new method for the type synthesis of generalized parallel manipulators with novel articulated moving platforms. The proposed method introduces a striking shortcut for the limb structure analysis of mechanisms with high rotational capability. In this paper, a class of generalized parallel manipulator with different degrees of freedom from 3 to 6 are constructed by using the constraint synthesis method, and several examples are provided to demonstrate the feasibility of the advocated method. At last, the 3T3R generalized parallel manipulator is taken as an example to analyze the inverse kinematics, and the evaluation of the workspace is conducted to verify the rotational capacity.
Merlet J-P. Parallel robots. New York: Springer Science & Business Media, 2006.
2.
TsaiL-W. Robot analysis: the mechanics of serial and parallel manipulators, New York: John Wiley & Sons, 1999.
3.
FichterEF. A Stewart platform-based manipulator: general theory and practical construction. Int J Robot Res1986; 5: 157–182.
4.
HuangZLiQDingH. Theory of parallel mechanisms. Mech Mach Sci2013; 6: 653–654.
5.
KongXGosselinCM. Kinematics and singularity analysis of a novel type of 3-CRR 3-DOF translational parallel manipulator. Int J Robot Res2002; 21: 791–798.
6.
FangYTsaiL-W. Structure synthesis of a class of 3-DOF rotational parallel manipulators. IEEE Trans Robot Autom2004; 20: 117–121.
7.
XieFLiuX-JYouZ, et al.Type synthesis of 2T1R-type parallel kinematic mechanisms and the application in manufacturing. Robot Comput-Integr Manuf2014; 30: 1–10.
8.
CaoW-aDingH. A method for solving all joint reactions of 3R2T parallel mechanisms with complicated structures and multiple redundant constraints. Mech Mach Theory2018; 121: 718–730.
9.
LuYWangPHouZ, et al.Kinetostatic analysis of a novel 6-DoF 3UPS parallel manipulator with multi-fingers. Mech Mach Theory2014; 78: 36–50.
10.
ZhaoTSChangWXiaoL, et al.Stiffness and singularity analysis of foldable parallel mechanism for ship-based stabilized platform. Robotica2016; 34: 913–924.
11.
TianCFangYGeQJ. Structural synthesis of parallel manipulators with coupling sub-chains. Mech Mach Theory2017; 118: 84–99.
12.
CaoW-aDingHChenZ, et al.Mobility analysis and structural synthesis of a class of spatial mechanisms with coupling chains. Robotica2016; 34: 2467–2485.
ZengQEhmannKF. Design of parallel hybrid-loop manipulators with kinematotropic property and deployability. Mech Mach Theory2014; 71: 1–26.
15.
MohamedMGGosselinCM. Design and analysis of kinematically redundant parallel manipulators with configurable platforms. IEEE Trans Robot2005; 21: 277–287.
16.
LambertPHerderJL. A 7-DOF redundantly actuated parallel haptic device combining 6-DOF manipulation and 1-DOF grasping. Mecha Mach Theory2019; 134: 349–364.
17.
JinXFangYZhangD. Design of a class of generalized parallel mechanisms with large rotational angles and integrated end-effectors. Mech Mach Theory2019; 134: 117–134.
18.
WangCFangYGuoS. Design and analysis of 3R2T and 3R3T parallel mechanisms with high rotational capability. J Mech Robot2016; 8: 011004.
19.
Pierrot F, Marquet F, Company O, et al. H4 parallel robot: modeling, design and preliminary experiments. In: Proceedings 2001 ICRA IEEE international conference on robotics and automation, 2001, pp.3256–3261. New York: IEEE.
20.
Krut S, Benoit M, Ota H, et al. I4: A new parallel mechanism for Scara motions. In: Proceedings ICRA'03 IEEE international conference on robotics and automation, 2003, pp.1875–1880. New York: IEEE.
21.
CarricatoM. Fully isotropic four-degrees-of-freedom parallel mechanisms for Schoenflies motion. Int J Robot Res2005; 24: 397–414.
22.
Shayya S, Krut S, Company O, et al. A novel (3T-1R) redundant parallel mechanism with large operational workspace and rotational capability. In: IEEE/RSJ international conference on intelligent robots and systems (IROS), 2013, pp.436–443. New York: IEEE.
23.
SunTSongYGaoH, et al.Topology synthesis of a 1-translational and 3-rotational parallel manipulator with an articulated traveling plate. J Mech Robot2015; 7: 031015.
24.
DanZWeiB. Modelling and optimisation of a 4-DOF hybrid robotic manipulator. Int J Comput Integr Manuf2017; 30: 1–11.
25.
TianCFangYGeQ. Design and analysis of a partially decoupled generalized parallel mechanism for 3T1R motion. Mech Mach Theory2019; 140: 211–232.
26.
Lambert P and Herder JL. Self dual topology of parallel mechanisms with configurable platforms. In: Computational kinematics. New York: Springer, 2014, pp.291–298.
27.
Lambert P. Parallel robots with configurable platforms. 2013.
28.
Zoppi M, Bruzzone L and Molfino R. A novel 5-DoF Interconnected-Chains PKM for manufacturing of revolute surfaces. In: 4th Chemnitzer parallel kinematik Seminar Chemnitz, 2004, pp.20–21.
29.
Krut S, Company O, Rangsri S, et al. Eureka: a new 5-degree-of-freedom redundant parallel mechanism with high tilting capabilities. In: Proceedings of IEEE/RSJ international conference on intelligent robots and systems, 2003, pp.3575–3580. New York: IEEE.
30.
Krut S and Pierrot F. On PKM with articulated travelling-plate and large tilting angles. In: Advances in robot kinematics. New York: Springer, 2006, pp.445–454.
31.
GuoSYeWQuH, et al.A serial of novel four degrees of freedom parallel mechanisms with large rotational workspace. Robotica2014; 34: 764–776.
32.
LiuX-JWangJPritschowG. A new family of spatial 3-DoF fully-parallel manipulators with high rotational capability. Mech Mach Theory2005; 40: 475–494.
33.
Gao F, Qian Z, Wang X, et al. A novel approach to embodiment design of a robotic system for maximum workspace. In: IEEE 10th conference on industrial electronics and applications (ICIEA), 2015, pp.539–544. New York: IEEE.
34.
YeWHeLLiQ. A new family of symmetrical 2T2R parallel mechanisms without parasitic motion. J Mech Robot2018; 10: 011006.
35.
ArataJKondoHIkedoN, et al.Haptic device using a newly developed redundant parallel mechanism. IEEE Trans Robot2011; 27: 201–214.
36.
WangCFangYFangH. Novel 2R3T and 2R2T parallel mechanisms with high rotational capability. Robotica2017; 35: 401–418.
37.
FangYTsaiLW. Structure synthesis of a class of 4-DoF and 5-DoF parallel manipulators with identical limb structures. Int J Robot Res2002. 21: 799–810.
38.
HuangZLiQ. Type synthesis of symmetrical lower-mobility parallel mechanisms using the constraint-synthesis method. Int J Robot Res2003; 22: 59–79.
39.
ZhangTZhangWGuptaMM. An underactuated self-reconfigurable robot and the reconfiguration evolution. Mech Mach Theory2018; 124: 248–258.
40.
BiZLinYZhangW. The general architecture of adaptive robotic systems for manufacturing applications. Robot Comput-Integr Manuf2010; 26: 461–470.
TianCFangYGeQ. Structural synthesis of a class of two-loop generalized parallel mechanisms. Mech Mach Theory2018; 128: 429–443.
43.
Tian C, Fang Y and Ge QJ. New kinematic structures for two-loop generalized parallel mechanism designs. In: IEEE international conference on robotics and automation (ICRA), 2018, pp.956–961. New York: IEEE.
44.
KongXGosselinCM. Type synthesis of 3T1R 4-DOF parallel manipulators based on screw theory. IEEE Trans Robot Autom2004; 20: 181–190.
