An analytical and experimental investigation considering the effect of material flow velocity on tensile strength of a steel alloy joint produced by friction stir welding process

Abstract

In this paper, the effects of linear speed, rotational speed, and tool radius of the pin and shoulder are investigated on the material flow velocity in friction stir welds. To obtain the maximum material flow velocity by an analytical method, a suggested relation is introduced for the rotational speed and tool optimum radius. The derived relation is based on the assumption of a velocity field in the stirring region. Besides, the effect of the linear speed on material flow velocity is investigated based on continuity and momentum equations. Finally, by using the experimental method and checking the mechanical properties of the welded parts obtained with different rotational speed, linear speed, and tool dimensions, the proposed analytical model is validated. The results indicate that in the friction stir welding process, the significant component effect on the stirring process is generated through the tool pin radius size. Besides, increasing the material flow velocity in the boundary layer increases the yield and ultimate strength of welds. To achieve the high-quality welds, rotational speed and other tool dimensions must be selected considering the equation extracted from the analytical method. Also, to make the maximum life for the pin and its components in friction stir welding of high melting point metals such as steel alloys, the operation is adjusted at a lower linear speed to prevent the destruction of the tool and improve the quality of the joint.

Keywords

Friction stir welding steel analytical method material flow mechanical properties

Get full access to this article

View all access options for this article.

References

Kumar

. Optimization of process parameters for friction stir welding of joining A6061 and A6082 alloys by Taguchi method. Proc Inst Mech Eng Part C J Mech Eng Sci 2013; 227: 1150–1163.

Aydin

Bayram

Durgun

. An investigation on microstructure and mechanical properties of post-weld heat-treated friction stir welds in aluminum alloy 2024 -W. Proc Inst Mech Eng Part C J Mech Eng Sci 2013; 227: 649–662.

Hwang

Fan

Lin

. Experimental study on Friction Stir Welding of copper metals. J Mater Process Technol 2010; 210: 1667–1672.

Aalami-Aleagha

Hadi

Shahbazi

. 3-dimensional numerical analysis of friction stir welding of copper and aluminum. J Mech Sci Technol 2016; 30: 3767–3776.

Wei

Nelson

. Correlation of microstructures and process variables in FSW HSLA-65 steel. Weld J 2011; 90: 95–101.

Reynolds

Tang

Gnaupel-Herold

Prask

. Structure, properties, and residual stress of 304 L stainless steel friction stir welds. Scr Mater 2003; 48: 1289–1294.

Saeid

Abdollah-Zadeh

Assadi

Ghaini

. Effect of friction stir welding speed on the microstructure and mechanical properties of a duplex stainless steel. Mater Sci Eng A 2008; 496: 262–268.

Baker

McNelley

Brewer

. Grain size and particle dispersion effects on the tensile behavior of friction stir welded MA956 oxide dispersion strengthened steel from low to elevated temperatures. Mater Sci Eng A 2014; 589: 217–227.

Chung

Fujii

Ueji

Tsuji

. Friction stir welding of high carbon steel with excellent toughness and ductility. Scr Mater 2010; 63: 223–226.

10.

Meran

Kovan

Alptekin

. Friction stir welding of AISI 304 austenitic stainless steel. Mater und Werkstofftechnik Entwicklung, Fert Prüfung, Eig und Anwendungen Tech Werkstoffe 2007; 38: 829–835.

11.

Meran

Canyurt

. Friction Stir Welding of austenitic stainless steels. Parameters 2010; 6: 13–13.

12.

Zhang

Cui

Liu

. Microstructures and mechanical properties of friction stir welds on 9% Cr reduced activation ferritic/martensitic steel. J Mater Sci Technol 2018; 34: 756–766.

13.

Bachmann

Rethmeier

. Numerical modeling for the effect of pin profiles on thermal and material flow characteristics in friction stir welding. Mater Des 2015; 77: 114–125.

14.

Kadian

Biswas

. Effect of tool pin profile on the material flow characteristics of AA6061. J Manuf Process 2017; 26: 382–392.

15.

Bin Zhang

Shi

Chen

. Visualization and simulation of plastic material flow in friction stir welding of 2024 aluminium alloy plates. Trans Nonferrous Met Soc China (English Ed) 2012; 22: 1445–1451.

16.

Zhang

Liu

Chen

. Effect of shoulder size on the temperature rise and the material deformation in friction stir welding. Int J Adv Manuf Technol 2009; 45: 889–895.

17.

Arora

Debroy

. Toward optimum friction stir welding tool shoulder diameter. Scr Mater 2011; 64: 9–12.

18.

Nandan

Roy

Lienert

Debroy

. Three-dimensional heat and material flow during friction stir welding of mild steel. Acta Mater 2007; 55: 883–895.

19.

White FM. Fluid mechanichs. 7th ed. New York: McGraw-Hill, 2011, pp.529–606.

20.

Ghetiya

Patel

. Welding speed effect on joint properties in air and immersed friction stir welding of AA2014. Proc Inst Mech Eng Part B J Eng Manuf 2017; 231: 095440541769055–095440541769055.

21.

Bilgin

Meran

. The effect of tool rotational and traverse speed on friction stir weldability of AISI 430 ferritic stainless steels. Mater Des 2012; 33: 376–383.

22.

Siddiquee

Pandey

Abidi

Al-Ahmari

Khan

Gangil

. Microstructural characterization and in-process traverse force during friction stir welding of austenitic stainless steel. Proc Inst Mech Eng Part C J Mech Eng Sci 2019; 234: 095440621988823–095440621988823.