Electrical discharge machining (EDM) is broadly used in machining of parts having intricate shapes made of difficult-to-machine materials. During EDM, tool fabrication time through conventional machining processes is generally excessively high. Therefore, alternate tool material and fabrication strategy is sought to reduce machining lead time. In this work, composite tools made of copper, tungsten and boron carbide have been prepared through powder metallurgy (PM) route. The performance of these tools is studied during machining of titanium alloy work piece. The input parameter considered are tool material parameters such as weight percentage of tungsten and boron carbide in the tool and machining parameters like peak current, pulse-on-time and duty cycle. The performance of these tools are evaluated considering the performance measures such as material removal rate (MRR), tool wear rate (TWR), average surface roughness (Ra), surface crack density (SCD), white layer thickness (WLT) and micro-hardness (MH). It is observed that the tool materials have been transferred onto the machined surface forming a hard layer with increased weight percentage of oxygen and carbon during machining. The PM tools exhibit similar performance as solid copper tool with respect to MRR, TWR and surface integrity.
KhanraAKSarkarBRBhattacharyaB, et al.
Performance of ZrB2–Cu composite as an EDM electrode. J Mater Process Technol2007;
183: 122–126.
2.
TsaiHCYanBHHuangFY.EDM performance of Cr/Cu-based composite electrodes. Int J Mach Tools Manuf2003;
43: 245–252.
3.
KuriachenBMathewJ.Experimental investigations into the effects of micro electric-discharge milling process parameters on processing Ti-6Al-4V. Mater Manuf Proces2015;
30: 983–990.
4.
Rahul MishraDKDattaSMasantaM.Effects of tool electrode on EDM performance of Ti-6Al-4V. Silicon2018;
10: 2263–2277.
5.
PradhanBBMasantaMSarkarBR, et al.
Investigation of electro-discharge micro-machining of titanium super alloy. Int J Adv Manuf Technol2009;
41: 1094–1106.
6.
D’UrsoGRavasioC.Material-technology index to evaluate micro-EDM drilling process. J Manuf Process2017;
26: 13–21.
7.
D’UrsoGGiardiniCRavasioC.Effects of electrode and workpiece materials on the sustainability of Micro-EDM drilling process. Int J Precis Eng Manuf2018;
19: 1727–1734.
8.
D’UrsoGMerlaC.Workpiece and electrode influence on micro-EDM drilling performance. Precis Eng2014;
38: 903–914.
9.
BhaumikMMaityK.Effect of different tool materials during EDM performance of titanium grade 6 alloy. Eng Sci Technol2018;
21: 507–516.
10.
AmorimFLStedileLJTorresRD, et al.
Performance and surface integrity of Ti6Al4V after sinking EDM with special graphite electrodes. J Mater Eng Perform2014;
23: 1480–1488.
11.
GillASKumarS.Surface roughness and microhardness evaluation for EDM with Cu–Mn powder metallurgy tool. Mater Manuf Proces2016;
31: 514–521.
12.
GoyalPSuriNMKumarS, et al.
Investigating the surface properties of EN-31 die-steel after machining with powder metallurgy EDM electrodes. Mater Today: Proc2017;
4: 3694–3700.
13.
BhanotVKBeriNKumarA. Machinability assessment of superni-800 during EDM with powder metallurgy processed Cu-Ti electrode using the Taguchi method. In: 5th international & 26th all India manufacturing technology, design and research conference (AIMTDR 2014), IIT Guwahati, Assam, India, 12–14 December, 2014.
14.
ChoudharyRKumarPSinghJ.Analysis of electro discharged machined surfaces of AISI D3 steel by composite tool electrode. Int J Surf Eng Mater Technol2012;
2: 53–58.
15.
LiLNiuZWZhengGM.Ultrasonic electrodeposition of Cu–SiC electrodes for EDM. Mater Manuf Proces2016;
31: 37–41.
16.
LiLWongYSFuhJYH, et al.
Effect of TiC in copper-tungsten electrodes on EDM performance. J Mater Process Technol2001;
113: 563–567.
17.
LiLWongYSFuhJYH, et al.
EDM performance of TiC copper-based sintered electrodes. Mater Design2001;
22: 669–678.
18.
ZawHMFuhJYHNeeAYC, et al.
Formation of a new EDM electrode material using sintering techniques. J Mater Process Technol1999;
89-90: 182–186.
19.
CogunCEsenZGencA, et al.
Effect of powder metallurgy Cu-B4C electrodes on workpiece surface characteristics and machining performance of electric discharge machining. Proc IMechE, Part B: J Engineering Manufacture2016;
230: 2190–2203.
20.
SamuelMPPhilipPK.Power metallurgy tool electrodes for electrical discharge machining. Int J Mach Tools Manuf1997;
37: 1625–1633.
21.
BalasubramanianPSenthilvelanT.A comparative study on the performance of different sintered electrodes in electrical discharge machining. Trans Indian Inst Met2015;
68: 51–59.
22.
ShuKMTuGC.Fabrication and characterization of Cu–SiCp composites for electrical discharge machining applications. Mater Manuf Proces2001;
16: 483–502.
23.
KumarPMSivakumarKJayakumarN.Multiobjective optimization and analysis of copper–titanium diboride electrode in EDM of monel 400™ alloy. Mater Manuf Proces2018;
33: 1429–1437.
24.
LiewPJNurlishafiqaZAhsanQ, et al.
Experimental investigation of RB-SiC using Cu–CNF composite electrodes in electrical discharge machining. Int J Adv Manuf Technol2018;
98: 3019–3028.
25.
El-TaweelTA.Multi-response optimization of EDM with Al–Cu–Si–TiC P/M composite electrode. Int J Adv Manuf Technol2009;
44: 100–113.
26.
MarafonaJWykesC.A new method of optimising material removal rate using EDM with copper–tungsten electrodes. Int J Mach Tools Manuf2000;
40: 153–164.
27.
MarafonaJD.Black layer affects the thermal conductivity of the surface of copper–tungsten electrode. Int J Adv Manuf Technol2009;
42: 482–488.
28.
GangadharAShunmugamMSPhilipPK.Surface modification in electrodischarge processing with a powder compact tool electrode. Wear1991;
143: 45–55.
29.
ShunmugamMSPhilipPKGangadharA.Tribological behaviour of an electrodischarge machined surface with a powder metallurgy bronze electrode. Tribol Int1993;
26: 109–113.
30.
ShunmugamMSPhilipPKGangadharA.Improvement of wear resistance by EDM with tungsten carbide P/M electrode. Wear1994;
171: 1–5.
31.
MohriNSaitoNTsunekawaY, et al.
Metal surface modification by electrical discharge machining with composite electrode. Annals ClRP1993;
42: 219–222.
32.
PatowariPKMishraUKSahaP, et al.
Surface integrity of C-40 steel processed with WC-Cu powder metallurgy green compact tools in EDM. Mater Manuf Proces2011;
26: 668–676.
33.
KrishnaMEPatowariPK.Parametric study of electric discharge coating using powder metallurgical green compact electrodes. Mater Manuf Proces2014;
29: 1131–1138.
34.
RahangMPatowariPK.Parametric optimization for selective surface modification in EDM using Taguchi analysis. Mater Manuf Proces2016;
31: 422–431.
35.
SinghBKumarJKumarS.Optimization and surface modification in electrical discharge machining of AA 6061/SiCp composite using Cu–W electrode. Proc IMeche2017;
231: 332–348.
36.
SahuAKMahapatraSSChatterjeeS. Optimization of electrical discharge coating process using MOORA based firefly algorithm. In: Proceedings of the ASME 2017 gas turbine India conference GTINDIA2017, Bangalore, India, 7–8 December 2017.
37.
SahuAKMahapatraSS.Surface characteristics of EDMed titanium alloy and AISI 1040 steel workpieces using rapid tool electrode. Arab J Sci Eng2020;
45: 699–718.
