In this paper, the singularity of a planar mechanism with kinematic redundancy is studied. First, the architecture of the mechanism and the concept schematic diagram for singularity avoidance are stated. Next, inverse kinematics model of the planar parallel mechanism with kinematic redundancy is established. For determining the unique inverse solution of the mechanism under certain initial installation configuration, a comparison analysis based on the strategy tree and the virtual prototype is performed. Then, based on the obtained Jacobian matrices and the singular condition, the workspace-singularity map and two singular configurations of the mechanism are drawn. Finally, with the obtained workspace-singularity map, a singularity-free transition layer and an aisle can be found to perform to singularity avoidance, even if the initial designed trajectory passing through the second kind of singularity. Three tasks are carried out to illustrate that the workspace boundary and singular configuration can be changed by adjusting the kinematic redundant actuated parameter.
QuHBGuoSZhangY.A novel relative degree-of-freedom criterion for a class of parallel manipulators with kinematic redundancy and its applications. Proc IMechE, Part C: J Mechanical Engineering Science2017;
231: 4227–4240.
2.
EgelandOSpangeloI.Manipulator control in singular configurations—Motion in degenerate directions. Advanced robot control. Berlin: Springer, 1991, pp. 296–306.
3.
MaciejewskiAAKleinCA.Obstacle avoidance for kinematically redundant manipulators in dynamically varying environments. Int J Rob Res1985;
4: 109–117.
YiB-J, HYeolN, JHoonL, et al.
Design of a parallel-type gripper mechanism. Int J Rob Res2008;
21: 661–676.
6.
PendarHMahnamaMZohoorH.Singularity analysis of parallel manipulators using constraint plane method. Mech Mach Theory2011;
46: 33–43.
7.
LiYTWangYX.Eliminating singularity of a parallel driving mechanism of axisymmetric vectoring exhaust nozzle. Proc IMechE, Part G: J Aerospace Engineering2013;
228: 2300–2309.
8.
EgelandOSpangeloI.Manipulator control in singular configurations—motion in degenerate directions. Ann NY Acad Sci1991;
762: 89–101.
9.
WangJ.Kinematic analysis, dynamic analysis and static balancing of planar and spatial parallel mechanisms or manipulators with revolute actuators. PhD thesis, Laval University, Québec, Canada, 1988.
10.
MüllerA.Manipulability and static stability of parallel manipulators. Multibody Sys Dyn2003;
9: 1–23.
11.
LiWAngelesJ.A novel three-loop parallel robot with full mobility: kinematics, singularity, workspace, and dexterity analysis. J Mech Rob2017;
9: 51003.
12.
GoguG.Structural synthesis of fully-isotropic translational parallel robots via theory of linear transformations. Eur J Mech A/Solids2004;
23: 1021–1039.
13.
ArakelianVBriotSGlazunovV.Increase of singularity-free zones in the workspace of parallel manipulators using mechanisms of variable structure. Mech Mach Theory2008;
43: 1129–1140.
14.
CamposLBourbonnaisFBonevIA, et al. Development of a five-bar parallel robot with large workspace. ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 15–18 August, Montreal, Quebec, Canada, 2010, pp. 917–922. New York: ASME.
15.
BriotSPagisGBoutonN, et al.
Degeneracy conditions of the dynamic model of parallel robots. Multibody Syst Dyn2016;
37: 371–412.
16.
HuntKH.Kinematic geometry of mechanisms.
Oxford:
Oxford University Press, 1978.
MerletJP.Singular configurations of parallel manipulators and Grassmann geometry. Int J Rob Res1989;
8: 45–56.
20.
MengQXieFGLiuXJ. V2: A novel two degree-of-freedom parallel manipulator designed for pick-and-place operations. In: 2017 IEEE International Conference on Robotics and Biomimetics, 5–8 December, Macau, China, 2017, pp. 1320–1327. New York: IEEE.
21.
WangYFanSZhangX, et al. Kinematics and singularity analysis of a 3-RPS parallel mechanism. In: 2017 IEEE International Conference on Robotics and Biomimetics, 5–8 December, Macau, China, 2017, pp. 1348–1351. New York: IEEE.
22.
SixDBriotSChrietteA, et al.
A controller avoiding dynamic model degeneracy of parallel robots during singularity crossing. J Mech Rob2017;
9: 051008–8pages.
23.
ChablatDKongXZhangC, et al.Kinematics workspace, and singularity analysis of a parallel robot with five operation modes. J Mech Rob2018;
10: 35001.
24.
AbeninnasabMHGallardo-AlvaradoJTarvirdizadehB, et al. Sliding-mode tracking control of the 6-dof 3-legged wide-open parallel robot. In: Cecilia N (ed.) Parallel manipulators: Design, applications and dynamic analysis. Hauppauge: Nova Science Publishers, 2016, pp. 143–166.
25.
MurrayMHovlandGBrogårdhT. Singularity-free reconfiguration of the 5-DOF Gantry-Tau parallel kinematic machine. In: Proceedings of 2nd International Workshop on Fundamental Issues and Future Research Directions for Parallel Mechanisms and Manipulators, Montpellier, France, 21–22 September 2008.
26.
KarimiAMasoulehMTCardouP.Avoiding the singularities of 3-RPR parallel mechanisms via dimensional synthesis and self-reconfigurability. Mech Mach Theory2016;
99: 189–206.
27.
HooperRTesarD. Motion coordination based on multiple performance criteria with a hyper-redundant serial robot example. In: Proceedings of Tenth International Symposium on Intelligent Control, Monterey, CA, USA, 1995, pp. 133–138. Piscataway: IEEE.
28.
KazerounianKNedungadiA.Redundancy resolution of serial manipulators based on robot dynamics. Mech Mach Theory1988;
23: 295–303.
29.
SeereeramSWenJT.A global approach to path planning for redundant manipulators. IEEE Trans Robot Automat1995;
11: 152–160.
30.
WhitneyDE.Resolved motion rate control of manipulators and human protheses. IEEE Trans Man Mach Syst1969;
10: 47–53.
31.
NotashLHuangL.On the design of fault tolerant parallel manipulators. Mech Mach Theory2003;
38: 85–101.
32.
QuHBZhangCLGuoS.Structural synthesis of a class of kinematically redundant parallel manipulators based on modified G-K criterion and RDOF criterion. Mech Mach Theory2018;
130: 47–70.
33.
ZanganehKEAngelesJ. Instantaneous kinematics and design of a novel redundant parallel manipulator. In: 1994 IEEE International Conference on Robotics and Automation, San Diego, CA, USA, 1994, pp. 3043–3048.
34.
WangJGosselinC.Kinematic analysis and design of kinematically redundant parallel mechanisms. J Mech Des2004;
126: 109–118.
35.
BandePSeibtMUhlmannE, et al.
Kinematics analyses of dodekapod. Mech Mach Theory2005;
40: 740–756.
36.
GosselinCLalibertéTVeilletteA.Singularity-free kinematically redundant planar parallel mechanisms with unlimited rotational capability. IEEE Trans Robot2015;
31: 457–467.
37.
KangLKimWYiBJ.Modeling and analysis of parallel mechanisms with both kinematic and actuation redundancies via screw theory. J Mech Rob2017;
9: 61007.
38.
HeiranFAbadiBNRTaghvaeiS, et al. Kinematics and workspace analysis of a novel parallel mechanism with kinematic redundancy. In: 2017 5th International Conference on Control, Instrumentation, and Automation, Shiraz, Iran, 2017, pp. 325–330. Piscataway: IEEE.
39.
KotlarskiJThanhTDHeimannB, et al. Optimization strategies for additional actuators of kinematically redundant parallel kinematic machines. In: 2010 IEEE International Conference on Robotics and Automation, Anchorage, AK, USA, 2010, pp. 656–661. Piscataway: IEEE.
40.
KotlarskiJHeimannBOrtmaierT. Experimental validation of the influence of kinematic redundancy on the pose accuracy of parallel kinematic machines. In: 2011 IEEE International Conference on Robotics and Automation, Shanghai, China, 2011, pp. 1923–1929. Piscataway: IEEE.
41.
KotlarskiJHeimannBOrtmaierT.Influence of kinematic redundancy on the singularity-free workspace of parallel kinematic machines. Front Mech Eng2012;
7: 120–134.
42.
GosselinCSchreiberLT.Kinematically redundant spatial parallel mechanisms for singularity avoidance and large orientational workspace. IEEE Trans Robot2016;
32: 286–300.
43.
BoudreauRNoklebyS.Force optimization of kinematically-redundant planar parallel manipulators following a desired trajectory. Mech Mach Theory2012;
56: 138–155.
44.
HooverRCRobertsRGMaciejewskiAA, et al.
Designing a failure-tolerant workspace for kinematically redundant robots. IEEE Trans Automat Sci Eng2015;
12: 1421–1432.
45.
KangLKimWBjY.Modeling and applications of a family of five-degree-of-freedom parallel mechanisms with kinematic and actuation redundancy. J Mech Rob2018;
10: 51004.
46.
MarquetFKrutSCompanyO, et al. ARCHI: a new redundant parallel mechanism-modeling, control and first results. In: 2001 IEEE/RSJ International Conference on Intelligent Robots and System, Maui, HI, USA, 2001, pp. 183–188. Piscataway: IEEE.
47.
ArakelianVBriotSYatsunS, et al. A new 3-DOF planar parallel manipulator with unlimited rotation capability. In: 13th World Congress in Robot and Machine Science, Guanajuato, Mexico, 2011, pp. IMD–123.
48.
GoguG.Structural synthesis of parallel robots, part 2: translation topologies with two and three degrees of freedom.
Berlin:
Springer, 2009.
49.
ChablatDMorozGArakelianV, et al. Solution regions in the parameter space of a 3-RRR decoupled robot for a prescribed workspace. In: Lenarčič J and Husty M (eds.) Latest advances in robot kinematics., Springer, 2012. pp.357–364.
50.
QuHBGuoS.Kinematics analysis of a novel planar parallel manipulator with kinematic redundancy. J Mech Sci Technol2017;
31: 1927–1935.
51.
SicilianoB.Kinematic control of redundant robot manipulators: a tutorial. J Intell Robot Syst1990;
3: 201–212.
52.
FaroniMBeschiMTosattiLM, et al.
A predictive approach to redundancy resolution for robot manipulators.IFAC-PapersOnLine2017;
50:8975–8980.
53.
RuizAGSantosJCCroesJ, et al.
On redundancy resolution and energy consumption of kinematically redundant planar parallel manipulators. Robotica2018;
36: 809–813.
54.
SantosJCda SilvaMM.Redundancy resolution of kinematically redundant parallel manipulators via differential dynamic programing. ASME J Mech Rob2017;
9: 041016.
55.
GosselinCAngelesJ.Singularity analysis of closed-loop kinematic chains. IEEE Trans Robot Automat1990;
6: 281–290.
56.
ChablatDWengerP. Working modes and aspects in fully parallel manipulators. In: Proceedings of the 1998 IEEE International Conference on Robotics and Automation, Leuven, Belgium, 1998, pp. 1964–1969.
57.
FontesJVCSantosJCda SilvaMM.Numerical and experimental evaluation of the dynamic performance of kinematically redundant parallel manipulators. J Braz Soc Mech Sci Eng2018;
40: 142.
