Investigation the influence of spacer yarns orientation angle on the thermal behavior of 3D textile reinforced concrete (TRC)

Thermal behavior such as heat transfer is an important parameter for construction composites. Three-dimensional textile reinforced concrete (TRC) is one of the construction composites which is recently being used in the building industry. Therefore, in this study, the thermal behavior of three different TRC samples was investigated by a heat transfer test using an infrared method. The cementitious matrix was reinforced by 3D fabric with three different spacer yarn orientation angles. The cementitious matrix was fabricated by cement and waste stone powder. The TRC sample was put on the hot plate of the heat transfer apparatus and the temperature variations of the top surface of the sample were obtained. According to the test results, increasing the orientation angle of spacer yarns leads to a decrease in the thermal conductivity of the TRC sample and reduces heat transfer. On the other hand, a theoretical model was used to calculate the thermal conductivity and resistance coefficients of sandwich samples. Furthermore, a 3D finite element model was used to predict the heat transfer of TRC specimens. A unit cell of the TRC model was created in Abaqus software and finite element (FE) analysis was carried on a created model. Thermal conductivity and thermal resistance of samples according to FE results were calculated and compared with experimental results. FE results showed good agreement with the experimental data.