A general mathematical modeling and finite element analysis of a strain wave gear possessing a double-circular-arc-with-a-common-tangent profile

Abstract

In this study, the characteristics of a strain wave gear (SWG) with a double-circular-arc with a common tangent (DCACT) profile were simulated using two-dimensional (2D) and three-dimensional (3D) finite element analysis (FEA). First, theoretically generated tooth profiles for the flexible spline (FS) and circular spline (CS) of an SWG were developed according to the theory of gearing. An automated mesh-generating computer program was developed in Visual C++ to establish 2D and 3D finite element models of the SWG based on its derived geometry. An FEA was then performed to explore the meshing characteristics, including the stress distribution, torsional angle, torsional stiffness, and number of engaged teeth, of the SWG. Continuous meshing of multiple tooth pairs between the FS and CS from the 2D FEA verified the conjugation of tooth profiles. The coning effect on the FS during assembly of the SWG was also predicted and discussed from the 3D FEA results. The 3D FEA produced more accurate and practical results than the 2D FEA did. Additionally, 3D FEAs of a modified (with longitudinal crowning) and unmodified (without longitudinal crowning) FS were performed and compared. Finally, a 3D FEA of a modified FS was successfully conducted to predict cyclic contact stress, root stress, and transmission error.

Keywords

Strain wave gear finite element analysis torsional stiffness engaged teeth number cyclic stress transmission error

Get full access to this article

View all access options for this article.

References

Musser

. Strain wave gearing. Patent number 2.906.143, USA, 1955.

Kondo

Takada

. Study on tooth profiles of the harmonic drive. J Mech Des 1990; 112: 131–137.

Dong

Ting

K-L

Wang

. Kinematic fundamentals of planar harmonic drives. J Mech Des 2011; 133: 011007.

Chen

Liu

Xing

, et al. The parametric design of double-circular-arc tooth profile and its influence on the functional backlash of harmonic drive. Mech Mach Theory 2014; 73: 1–24.

Yao

Y-P

Chen

X-X

Xing

J-Z

. Complex cycloidal tooth profile of circular spline in harmonic drive and its optimal fitting research. J Ind Prod Eng 2017; 34: 1–8.

Ling

Wang

, et al. Study on tooth profile design of harmonic drive with deformation model of flexspline. Meccanica 2021; 56: 1883–1904.

Kiyosawa

Takizawa

Oukura

, et al. Cup-type harmonic drive having a short, flexible cup member. Patent number 5.269.202, USA, 1993.

Dong

Wang

Ting

K-L

. Elastic kinematic and geometric model of harmonic gear drives. In: Proceedings of the ASME design engineering technical conference, New York, NY, 3–6 August2008.

Dong

Wang

Ting

K-L

. Kinematic effect of the compliant cup in harmonic drives. J Mech Des 2011; 133: 051004.

10.

Chen

Liu

. Double-arc harmonic gear profile design and meshing analysis for multi-section conjugation. Adv Mech Eng 2019; 11: 1–14.

11.

Tang

Wang

, et al. Double-circular-arc tooth profile design and parametric analysis on the comprehensive performance of the harmonic drive. Proc IMechE, Part J: J Engineering Tribology 2022; 236: 480–498.

12.

Rhéaume

Champliaud

Liu

. On the computing of the torsional rigidity of a harmonic drive using FEA. In: ANSYS conference and exhibition, Canonsburg, PA, 2–4 May2006.

13.

León

Arzola

Tovar

. Statistical analysis of the influence of tooth geometry in the performance of a harmonic drive. J Barz Soc Mech Sci 2015; 37: 723–735.

14.

Pacana

Markowska

. The flexspline of the harmonic drive with different tooth profile. Adv Manuf Sci Technol 2017; 41: 23–30.

15.

Yague-Spaude

Gonzalez-Perez

Fuentes-Aznar

. Stress analysis of strain wave gear drives with four different geometries of wave generator. Meccanica 2020; 55: 2285–2304.

16.

Kikuchi

Nitta

Kiyosawa

, et al. Stress analysis of cup type strain wave gearing. Key Eng Mater 2003; 243–244: 129–134.

17.

Rhéaume

F-E

Champliaud

Liu

. Understanding and modelling the torsional stiffness of harmonic drives through finite-element method. Proc IMechE, Part C: J Mechanical Engineering Science 2009; 223: 515–524.

18.

Ostapski

. Analysis of the stress state in the harmonic drive generator-flexspline system in relation to selected structural parameters and manufacturing deviations. B Pol Acad Sci-Tech 2010; 58: 683–698.

19.

Ting

K-L

. Explicit dynamics analysis for harmonic drives. In: Proceedings of the ASME design engineering technical conference, New York, NY, 17–20 August2014.

20.

Routh

Maiti

Ray

. Analysis of coning and lubrication at flexspline cup and cam interface in conventional harmonic drives. Ind Lubrication Tribol 2017; 69: 817–827.

21.

Ting

K-L

. Application of finite element analysis for the strain wave gear tooth surfaces design and modification. In: American gear manufacturers association fall technical meeting, Oak Brook, Il, 24–26 September2018.

22.

Mahanto

Sahoo

Maiti

. Effect of cam insertion on stresses in harmonic drive in industrial robotic joints. Procedia Comput Sci 2018; 133: 432–439.

23.

Sahoo

Maiti

. Evidence of secondary tooth contact in harmonic drive, with involute toothed gear pair, through experimental and finite element analyses of stresses in flex-gear cup. Proc IMechE, Part C: J Mechanical Engineering Science 2018; 232: 341–357.

24.

Sahoo

Maiti

. Load sharing by tooth pairs in involute toothed harmonic drive with conventional wave generator cam. Meccanica 2018; 53: 373–394.

25.

Sahoo

Mahanto

Maiti

. Stresses in flex gear of a novel harmonic drive with and without pay load. Aust J Mech Eng 2020; 1–15.

26.

Yang

Liu

, et al. Analysis of the partial axial load of a very thin-walled spur-gear (flexspline) of a harmonic drive. Int J Precis Eng Manuf 2020; 21: 1333–1345.

27.

Majchrák

Kohár

Hrček

, et al. The comparison of the amount of backlash of a harmonic gear system. Tehnički vjesnik 2021; 28: 771–778.

28.

Chen

Y-C

Cheng

Y-H

Tseng

J-T

, et al. Study of a harmonic drive with involute profile flexspline by two-dimensional finite element analysis. Eng Comput 2017; 34: 2107–2130.

29.

Chen

Y-C

Cheng

Y-H

Tseng

J-T

, et al. Tooth geometry design and two-dimensional finite element analysis for a strain wave gear with double-circular-arc profile. In: Proceedings of the ASME design engineering technical conference, Anaheim, CA, 18–21 August2019.

30.

Litvin

Fuentes-Aznar

. Gear geometry and applied theory. 2nd ed. New York: Cambridge University Press, 2004.

31.

Budynas

Nisbett

Tangchaichit

, et al. Shigley’s mechanical engineering design. 11th ed. New York: McGraw-Hill Education, 2021.

32.

Kayabasi

Erzincanli

. Shape optimization of tooth profile of a flexspline for a harmonic drive by finite element modelling. Mater Des 2007; 28: 441–447.