Study on mechanical properties of wind turbine blades with bend-twist coupling effect

Abstract

Bend-twist coupling (BTC), a method of passive load alleviation for turbine blade, has a significant influence on blade mechanical properties. The coupling behavior between bending and twisting motions stems from the material anisotropy in blade laminate or from the unique blade geometry such as sweep, deflection, and pre-bending. The material-based approach is employed in this research to determine influence regularity of BTC design on blade mechanical properties. To begin with, the blade property analysis tool PreComp that integrates a shear flow method with the classical laminate theory is adopted to compute the cross-sectional stiffnesses of the blades with different degree of BTC effect. Next, the bend-twist coupling coefficients for the BTC blades with different fiber orientation are calculated. Finally, the remaining mechanical properties including static performance, modal characteristics and buckling limits for different BTC blades are determined by the finite element method and the influence of changes in the degree of BTC effect on all these mechanical properties is further evaluated. The results show that the BTC effect markedly influences the different mechanical properties of the blade in different patterns. The 20° BTC blade has the highest BTC coefficient and the edgewise BTC coefficient at 100 m is 2.5 times higher than the flapwise BTC coefficient, while the maximum value of the torsional modal frequency of 3.8429 Hz and the greatest critical buckling load of 4328.1 kN corresponds to the 10° BTC blade and the 15° BTC blade respectively.

Keywords

Turbine blade load alleviation material-based method bend-twist coupling mechanical properties

Get full access to this article

View all access options for this article.

References

Amano

. Review of wind turbine research in 21st century. J Energy Resour Technol 2017; 139: 050801.

Caithness Windfarm Information Forum. Summary of wind turbine accident data to 30 June 2021 [EB/OL][2021-06-30], https://scotlandagainstspin.org/turbine-accident-statistics-to-30-june-2021 (2021, accessed 30 June 2021).

Njiri

Beganovic

, et al. Consideration of lifetime and fatigue load in wind turbine control. Renew Energy 2019; 131: 818–828.

Meng

Lien

F-S

Glinka

, et al. Study on fatigue life of bend-twist coupling wind turbine blade based on anisotropic beam model and stress-based fatigue analysis method. Compos Struct 2019; 208: 678–701.

Chen

Shen

Zhu

, et al. Study on composite bend-twist coupled wind turbine blade for passive load mitigation. Compos Struct 2019; 213: 173–189.

Manolas

Serafeim

Chaviaropoulos

, et al. Assessment of load reduction capabilities using passive and active control methods on a 10MW-scale wind turbine. J Phys Conf Ser 2018; 1037: 032042.

Ward

Collu

Sumner

. Analysis of the effect of a series of back twist blade configurations for an active pitch-to-stall floating offshore wind turbine. J Offshore Mech Arctic Eng 2020; 142: 062001.

Barlas

van Kuik

. Review of state of the art in smart rotor control research for wind turbines. Prog Aerosp Sci 2010; 46(1): 1–27.

Wiens

Meyer

Wenske

. Exploiting bend-twist coupling in wind turbine control for load reduction. IFAC-PapersOnLine 2020; 53: 12139–12144.

10.

Hayat

. Load mitigation of wind turbine blade by aeroelastic tailoring via unbalanced laminates composites. Compos Struct 2015; 128: 122–133.

11.

Kragh

Hansen

. Load alleviation of wind turbines by yaw misalignment. Wind Energy 2014; 17: 971–982.

12.

Ponta

Otero

Rajan

, et al. The adaptive-blade concept in wind-power applications. Energy Sustain Dev 2014; 22: 3–12.

13.

Stäblein

Hansen

Pirrung

. Fundamental aeroelastic properties of a bend–twist coupled blade section. J Fluid Struct 2017; 68: 72–89.

14.

Shakya

Sunny

Maiti

. A parametric study of flutter behavior of a composite wind turbine blade with bend-twist coupling. Compos Struct 2019; 207: 764–775.

15.

Lobitz

Veers

. Load mitigation with bending/twist-coupled blades on rotors using modern control strategies. Wind Energy 2003; 6: 105–117.

16.

Lobitz

Veers

. Aeroelastic behavior of twist-coupled HAWT blades. In: 1998 ASME wind energy symposium, p.29.

17.

Ong

Wang

Tsai

. Design, manufacture and testing of a bend-twist D-spar. In: 37th aerospace sciences meeting and exhibit, 1999, pp.43–52.

18.

Vesel

McNamara

. Performance enhancement and load reduction of a 5 MW wind turbine blade. Renew Energy 2014; 66: 391–401.

19.

Kwon

. Predicting wind turbine blade loads and aeroelastic response using a coupled CFD–CSD method. Renew Energy 2014; 70: 184–196.

20.

Mardanpour

Izadpanahi

Rastkar

, et al. Geometrically exact, fully intrinsic analysis of pre-twisted beams under distributed follower forces. AIAA J 2018; 56: 836–848.

21.

Bagherpour

Manolas

, et al. Modeling of material bend-twist coupling on wind turbine blades. Compos Struct 2018; 193: 237–246.

22.

Zhou

Huang

. Effects of bend-twist coupling on flutter limits of composite wind turbine blades. Compos Struct 2018; 192: 317–326.

23.

Stäblein

Hansen

Verelst

. Modal properties and stability of bend–twist coupled wind turbine blades. Wind Energy Sci 2017; 2: 343–360.

24.

Bir

. User’s guide to PreComp (pre-processor for computing composite blade properties). Golden, CO: National Renewable Energy Lab (NREL), 2006.

25.

Griffith

Ashwill

. The Sandia 100-meter all-glass baseline wind turbine blade: SNL100-00. Technical report, SAND2011-3779. Sandia National Laboratories, 2011.

26.

International Electrotechnical Commission. Wind turbine generator systems—part 13: measurement of mechanical loads, Standard IEC 61400-13. Geneva: International Electrotechnical Commission, 2015.

27.

Bir

. Computerized method for preliminary structural design of composite wind turbine blades. J Sol Energy Eng 2001; 123: 372–381.