Influence of slurry delivery rate and height from cooling slope outlet on solidification and structural behaviors of molded AZ91 magnesium alloy

AZ91 magnesium alloy melt experiences partial solidification while flowing on cooling slope with counter flowing water channel underside. It results in continuous production of semisolid slurry available at cooling slope outlet. Current experimental investigations pertain to the influence of slurry delivery rate and slurry delivery height from cooling slope outlet on solidification and structural behaviors (microstructure along with mechanical properties) of AZ91 magnesium alloy intended for semisolid casting. Slurry delivery rate along with slurry delivery height warrant necessary solidification and shear for grain growth and globularization within metal mold for producing semisolid casting. Moderate slurry delivery rate of 0.025 kg/s along with slurry delivery height of 150 mm results fairly modest solidification that would greatly contribute toward enhanced structural behaviors. As, quite smaller/bigger slurry delivery rate/height generate low shear due to slurry flow inertia or accelerated slurry flow resulting stick-slip flow/motion of alloy slurry on cooling slope. It results poorer structural behaviors amid extremely unwanted casting issues. As, throughout the course escape/retain of metal with gas arise. Since, lesser slurry delivery rate/height allows metal to escape thereby reduces strength and vice-versa. Additionally, lesser slurry delivery rate/height allows gas to escape thereby enhances strength and vice-versa. Therefore, moderate cooling slope casting parameter magnitudes guarantee solution to bewilderment.