Gas generators have been gradually utilized to inflate inflatable space structures, and normally they use high-energy nitrogenous compounds and solid propellants as gas-generating agents. However, gas generators with a high combustion temperature, fast reaction speed, and massive energy generation will lead to an excessively high gas temperature inside the inflatable structures and an excessively fast unfolding speed, which causes wrinkles or even cracks in inflatable films. This paper proposes a new gas generating device using NaHCO3 as the gas generating agent and resistance wires as heating elements to maintain the advantages of small size and light weight, as well as high security and lack of pollution. The feasibility of the gas generator is computationally analyzed in COMSOL and experimentally verified. Additionally, a tightness test of the gas generation system is undertaken using air pressure sensors. The results show that the device can slowly and steadily generate CO2 gas to deploy thin-film inflatable structures.
RongqiangLIUChuangSHIHongweiGUO, et al. Review of space deployable antenna mechanisms. J Mech Eng2020; 56: 1.
2.
TianDGaoHJinL, et al. Research status and prospect of modular space deployable and foldable mechanism. Chin Space Sci Technol2021; 41: 16.
3.
SchenkMViqueratADSeffenKA, et al. Review of inflatable booms for deployable space structures: packing and rigidization. J Spacecr Rockets2014; 51: 762–778.
4.
LittekenDA. Inflatable technology: using flexible materials to make large structures. In: Electroactive polymer actuators and devices (EAPAD) XXI, 2019, p.1096603. Bellingham, WA: SPIE.
5.
WeiJYuJTanH, et al. Design and testing of inflatable gravity-gradient booms in space. CEAS Space J2020; 12: 33–41.
LindellMHughesSDixonM, et al. Structural analysis and testing of the inflatable re-entry vehicle experiment (IRVE). In: 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 14th AIAA/ASME/AHS Adaptive Structures Conference 7th, 2006, p.1699. Reston, VA: American Institute of Aeronautics and Astronautics.
8.
NakasukaSSendaKWatanabeA, et al. Simple and small de-orbiting package for nano-satellites using an inflatable balloon. Trans Jpn Soc Aeronaut Space Sci Space Technol Jpn2009; 7: Tf_31–Tf_36.
9.
BabusciaAChoiTSauderJ, et al. Inflatable antenna for CubeSats: development of the X-band prototype. In: 2016 IEEE aerospace conference, Big Sky, MT, USA, 5–12 March 2016, pp.1–11. New York, NY: IEEE.
10.
HornAC. A low cost inflatable CubeSat drag brake utilizing sublimation. MS Thesis, Old Dominion University, USA, 2017.
11.
NockKGatesKAaronK, et al. Gossamer Orbit Lowering Device (GOLD) for safe and efficient de-orbit. In: AIAA/AAS Astrodynamics specialist conference, 2010, p.7824. Reston, VA: American Institute of Aeronautics and Astronautics.
12.
ChandraAThangavelauthamJJAPA. De-orbiting small satellites using inflatables. arXiv preprint arXiv:04459, 2018.
13.
BabusciaASauderJChandraA, et al. Inflatable antenna for CubeSat: a new spherical design for increased X-band gain. In: 2017 IEEE aerospace conference, Big Sky, MT, USA, 4–11 March 2017, pp.1–10. New York, NY: IEEE.
14.
MüllerCLebbinkLPZandbergenB, et al. Implementation of the T3μPS in the Delfi-n3Xt satellite. In: SandauRRoeserH-PValenzuelaA (eds), Small Satellite Missions for Earth Observation. Heidelberg, Dordrecht, London, New York: Springer, 2010, pp.411–424.
15.
MoerelJSandersHLouwerseM, et al. Development of micro propulsion system technologies for minisatellites in the Netherlands. In: Proceedings of the space propulsion 2008, 5th international spacecraft propulsion conference, Springer; Berlin, German, 2008, pp.5–9.
16.
McGrathDKirschnerTMionskeG, et al. Mars pathfinder airbag gas generator development. In: 34th AIAA/ASME/SAE/ASEE joint propulsion conference and exhibit1998, p.3845. Reston, VA: American Institute of Aeronautics and Astronautics.
17.
Van Der ListMVan VlietLSandersH, et al. Applications for solid propellant cool gas generator technology. In: 4th International spacecraft propulsion conference, 2004.
18.
HanZGongLYanS, et al. A novel of spacecraft flexible compartment safe and stable inflatable expansion system with the environmental-friendly fuel. J Clean Prod2021; 279: 123843.
19.
ViqueratASchenkMSandersB, et al. Inflatable rigidisable mast for end-of-life deorbiting system. In: European conference on spacecraft structures, materials and environmental testing (SSMET), 2014, pp.1–10. Cambridge, MA: The SAO/NASA Astrophysics Data System.
20.
SandersHMSchuurbiersCAHVandebergRJ. Improvements on cool gas generators and their application in space propulsion systems. In Space Propulsion 2014, Maritim Hotel, Cologne, Germany, 19-22 May 2014. 4th edition of the Space Propulsion Conference is organized by the Association Aronautique et Astronautique de France in collaboration with ESA, CNES and DLR, 2014. Netherlands: TNO innovation for life.
21.
RoddyMHodgesHRoeL, et al. Demonstration of a solid-state inflation balloon deorbiter. In: ASME international mechanical engineering congress and exposition, Tampa, FL, USA, 2017, pp.V010T013A026. American Society of Mechanical Engineers, New York, NY.
22.
RoddyMAHuangP-HA. A solid-state gas generator actuated deorbiter for CubeSats. J Microelectromech Syst2019; 28: 1068–1079.
ZhangPY. Electric Heating Equipment, Beijing, China: Chemical Industry Press, 2006.
25.
MaessenDCvan BreukelenECZandbergenBTC, et al. Development of a generic inflatable de-orbit device for CubeSats. In: Proceedings of the 58th international astronautical congress, 2007.
26.
MauginGA. The thermomechanics of nonlinear irreversible behaviours. Singapore: World Scientific, 1999.
