This paper introduces a four-legged decoupled Schönflies-motion generator parallel manipulator, free of passive limbs, provided with three linear actuators and one rotary actuator. The displacement analysis problem leads to closed-form solutions, thus avoiding the application of numerical methods for their solution, an unusual feature for most parallel manipulators. Subsequently, the theory of screws allows for solving the velocity, acceleration, and jerk analyses. Canceling the passive joint rates of the limbs is an indisputable advantage of the reciprocal-screw algebra. Moreover, upon the velocity analysis, the singularity analysis of the parallel manipulator is carried out by investigating the nature of the Jacobian matrices of the parallel manipulator. Then, we conclude that the robot at hand is free of type I and III singularities. Numerical examples enhance the correctness of the kinematic analysis method employed in the contribution. As far as the authors are aware, the topology of the parallel manipulator investigated here is original.
ClavelR. DELTA: a fast robot with parallel geometry. In: 18th International symposium on industrial robot, pp.91–100. Berlin, Heidelberg: Springer-Verlag GmbH & Co. K.
2.
ClavelR.
Device for the movement and positioning of an element in space. US Patent No 4976582, 1990.
3.
PierrotFNabatVCompanyO, et al. Optimal design of a 4-DOF parallel manipulator: from academia to industry. IEEE Trans Robot2009; 25: 213–224.
4.
HervéJ. The Lie group of rigid body displacements, a fundamental tool for mechanism design. Mech Mach Theory1999; 34(5): 719–730.
5.
YangTJinQLiuA, et al. Structure synthesis of 4-DOF (3-translation and 1-rotation) parallel robot mechanisms based on the units of single-opened-chain. In: Proceedings of the ASME 2001 international design engineering technical conferences and computers and information in engineering conference, vol. 2B: 27th design automation conference, pp.1295–1302. Pittsburgh, PA: ASME.
6.
McCloyD. Some comparisons of serial-driven and parallel-driven manipulators. Robotica1990; 8(4): 355–362.
7.
StaffettiEThomasF.
Kinestatic analysis of serial and parallel robot manipulators using Grassmann-Cayley algebra. Dordrecht: Springer, 2000, pp.17–26.
8.
PatelYDGeorgePM. Parallel manipulators applications—a survey. Mod Mech Eng2012; 02: 57–64.
9.
NzueRMABrethéJFVasselinE, et al. Comparison of serial and parallel robot repeatability based on different performance criteria. Mech Mach Theory2013; 61: 136–155.
10.
EbrahimiSEshaghiyeh-FiroozabadiA. Dynamic performance evaluation of serial and parallel RPR manipulators with flexible intermediate links. Iran J Sci Technol Trans Mech Eng2016; 40: 169–180.
11.
MoserBLGordonJAPetruskaAJ. Unified Parameterization and calibration of serial, parallel, and hybrid manipulators. Robotics2021; 10(4): 124–212.
12.
Gallardo-AlvaradoJGallardo-RazoJ.
Mechanisms: Kinematic Analysis and applications in robotics. London: Academic Press, An Imprint of Elsevier, 2022.
13.
TsaiLW. Robot analysis: the mechanics of serial and parallel manipulators. New York: Wiley, 1999.
14.
AngelesJCaroSKhanW, et al. Kinetostatic design of an innovative Schönflies-motion generator. Proc IMechE, Part C: J Mechanical Engineering Science2006; 220(7): 935–943.
15.
TaghvaeipourAAngelesJLessardL. Elastodynamics of a two-limb Schönflies motion generator. Proc IMechE, Part C: J Mechanical Engineering Science2015; 229(4): 751–764.
16.
TaghvaeipourAAngelesJLessardL. Optimum structural design of a two-limb Schönflies motion generator. Mech Mach Theory2014; 80: 125–141.
17.
KimSMShinKYiBJ, et al. Development of a novel two-limbed parallel mechanism having Schönflies motion. Proc IMechE, Part C: J Mechanical Engineering Science2015; 229(1): 136–154.
18.
Gallardo-AlvaradoJ. Kinematics of a three-legged 1R2T decoupled parallel manipulator. J Braz Soc Mech Sci Eng2023; 45(2): 1–14.
19.
RollandL. The MANTA and the KANUK novel 4-DOF parallel mechanisms for industrial handling. In: International mechanical engineering congress and exposition, Nashville, TN.
20.
CompanyOMarquetFPierrotF. A new high-speed 4-DOF parallel robot synthesis and modeling issues. IEEE Trans Robot Autom2003; 19(3): 411–420.
21.
SalgadoOAltuzarraOAmezuaE, et al. A parallelogram-based parallel manipulator for Schönflies Motion. J Mech Des2007; 129(12): 1243–1250.
22.
XieFLiuXJ. Design and development of a high-speed and high-rotation robot with four identical arms and a single platform. J Mech Robot2015; 7(4): 041015.
23.
Gallardo-AlvaradoJAbedinnasabMHLichtblauD. Simplified kinematics for a parallel manipulator generator of the Schönflies Motion. J Mech Robot2016; 8(6): 1–10.
24.
WuGBaiSCaroS. A transmission quality index for a class of four-limb parallel Schönflies motion generators. J Mech Robot2018; 10(5): 051014.
25.
SchreiberLTGosselinC. Schönflies motion PARAllel robot (SPARA): a kinematically redundant parallel robot with unlimited rotation capabilities. IEEE ASME Trans Mechatron2019; 24(5): 2273–2281.
26.
YangXZhaoZXiongH, et al. Kinematic analysis and optimal design of a novel Schönflies-motion parallel manipulator with rotational pitch motion for assembly operations. J Mech Robot2021; 13(4): 040910.
27.
NurahmiLPutrayudantoPWeiG, et al. Geometric constraint-based reconfiguration and self-motions of a four-CRU parallel mechanism. J Mech Robot2021; 13(2): 021017.
28.
GaoXSLeiDLiaoQ. Generalized Stewart-Gough platforms and their direct kinematics. IEEE Trans Robot2005; 21(2): 141–151.
29.
TozMKucukS. Development of derivation of inverse Jacobian matrices for 195 6-DOF GSP mechanisms. Turk J Electr Eng Comput Sci2016; 24(5): 4142–4153.
30.
TozMKucukS. Parallel manipulator software tool for design, analysis, and simulation of 195 GSP mechanisms. Comput Appl Eng Educ2015; 23(6): 931–946.
31.
TozMKucukS. Dexterous workspace optimization of an asymmetric six-degree of freedom Stewart–Gough platform type manipulator. Robot Auton Syst2013; 61(12): 1516–1528.
32.
RollandL. Certified solving of the forward kinematics problem with an exact algebraic method for the general parallel manipulator. Adv Robot2005; 19(9): 995–1025.
33.
HuYLiB. Robust design and analysis of 4PUS–1RPU parallel mechanism for a 5-degree-of-freedom hybrid kinematics machine. Proc IMechE, Part B: J Engineering Manufacture2011; 225(5): 685–698.
34.
SchadlbauerJWalterDRHustyML. The 3-RPS parallel manipulator from an algebraic viewpoint. Mech Mach Theory2014; 75: 161–176.
NagASafarVBandyopadhyayS. A uniform geometric-algebraic framework for the forward kinematic analysis of 6-6 Stewart platform manipulators of various architectures and other related 6-6 spatial manipulators. Mech Mach Theory2021; 155: 104090.
37.
ChenZXiQGaoF, et al. Generation of eight new classes of the 2UPS-UP mechanism with analytical forward kinematics solution. Mech Mach Theory2023; 181: 105198.
38.
NanWTangXSongB. A new automatic motion planning algorithm for a 4-degree-of-freedom parallel kinematic manipulator based on the centre sphere method. Proc IMechE, Part B: J Engineering Manufacture2015; 229(1_suppl): 64–77.
39.
GasparettoAZanottoV. A new method for smooth trajectory planning of robot manipulators. Mech Mach Theory2007; 42(4): 455–471.
40.
GuarinoLoBiancoCGhilardelliF. A scaling algorithm for the generation of jerk-limited trajectories in the operational space. Robot Comput Integr Manuf2017; 44: 284–295.
41.
Gallardo-AlvaradoJCamarillo-GómezKA. Inverse jerk analysis of symmetric zero-torsion parallel manipulators. Robot Auton Syst2011; 59(11): 859–866.
42.
Gallardo-AlvaradoJ. Jerk analysis of a six-degrees-of-freedom three-legged parallel manipulator. Robot Comput Integr Manuf2012; 28(2): 220–226.
43.
ZhouXXuYYaoJ, et al. Stiffness modelling and comparison of the 5-UPS/PRPU parallel machine tool with its non-redundant counterpart. Proc IMechE, Part B: J Engineering Manufacture2017; 231(9): 1646–1657.
44.
LeeCCHervéJ. On the enumeration of Schoenflies motion generators. In: Ninth international symposium on theory of machines and mechanisms. Bucharest, Romania: IFToMM.
45.
AngelesJCaroSKhanW, et al. The design and prototyping of an innovative Schoenflies motion generator. Proc IMechE, Part C: J Mechanical Engineering Science2006; 220(7): 935–943.
46.
Gallardo-AlvaradoJ.
Kinematic analysis of parallel manipulators by algebraic screw theory. Cham: Springer International Publisher, 2016.
47.
BallR.
A treatise on the theory of screws. Cambridge: Cambridge University Press, 1900.
48.
LipkinHDuffyJ. The elliptic polarity of screws. J Mech Transm Autom Des1985; 107: 377–386.
49.
MartínezJRDuffyJ. An application of screw algebra to the acceleration analysis of serial chains. Mech Mach Theory1996; 31(4): 445–457.
50.
RicoJMGallardoJDuffyJ. Screw theory and higher order kinematic analysis of open serial and closed chains. Mech Mach Theory1999; 34(4): 559–586.
51.
WangHWangHHuangJ, et al. Smooth point-to-point trajectory planning for industrial robots with kinematical constraints based on high-order polynomial curve. Mech Mach Theory2019; 139: 284–293.
52.
FangYQiJHuJ, et al. An approach for jerk-continuous trajectory generation of robotic manipulators with kinematical constraints. Mech Mach Theory2020; 153: 103957.
53.
LuoHYuJLiL, et al. A novel framework for high-speed cam curve synthesis: piecewise high-order interpolation, pointwise scaling and piecewise modulation. Mech Mach Theory2022; 167: 104477.
54.
TangPYLinMTTsaiMS, et al. Toolpath interpolation with novel corner smoothing technique. Robot Comput Integr Manuf2022; 78: 102388.
55.
XiaoJLiuSLiuH, et al. A jerk-limited heuristic feedrate scheduling method based on particle swarm optimization for a 5-DOF hybrid robot. Robot Comput Integr Manuf2022; 78: 102396.
56.
PulloquingaJLEscarabajalRJValeraA, et al. A type II singularity avoidance algorithm for parallel manipulators using output twist screws. Mech Mach Theory2023; 183: 105282.
57.
GosselinCAngelesJ. Singularity analysis of closed-loop kinematic chains. IEEE Trans Robot Autom1990; 6: 281–290.
58.
CraigJ (ed.). Introduction to Robotics: Mechanics and Control. 4th ed.London: Pearson, 2018.
