The turbine disk is the core component of an aero-engine whose position and unbalanced force seriously affect the vibration stability of the rotor system. Ignoring the influence of the offset disk may result in discrepancies between real-world scenarios and numerical simulation results. The present work aims to explore the nonlinear dynamic characteristics of rotor systems under the coupling of bolted joint and offset disk effect, as well as the influence of offset disk position and its unbalanced force on the system dynamic behavior and bending stiffness of bolted joint also investigated. The governing equations of a bolted joint rotor-bearing system with an offset disk were established based on the finite element method and derived as a dimensionless expression in the first. Then, the Newmark method was employed for the numerical solution of the motion equations, and then a bifurcation analysis of the rotor system and the evolution of bending stiffness for the bolted joint was studied. Next, by comparing the frequency-amplitude diagrams, bifurcation diagrams, time history, shaft obits, and bending stiffness diagrams of the bolted joint, the effect of the offset disk position and its unbalanced force on the nonlinear system dynamic was revealed. Finally, an experimental study was carried out to verify the numerical result using the bolted joint rotor test rig with an offset disk. The analysis result of the present work can provide theoretical guidance for structure design and stability analysis on the aero-engine.
LiYWenCLuoZ, et al. Bifurcation studies of a bolted-joint rotor system subjected to fixed-point rubbing fault. Nonlinear Dyn2022; 110: 3045–3073.
2.
Mir-HaidariSEBehdinanK. Advanced test protocols for rapid detection and quantification of nonlinear dynamic responses in aeroengine casing assemblies. Nonlinear Dyn2021; 104: 2219–2239.
3.
MaYWangYWangC, et al. Nonlinear interval analysis of rotor response with joints under uncertainties. Chin J Aeronaut2020; 33: 205–218.
4.
QinZHanQChuF. Analytical model of bolted disk–drum joints and its application to dynamic analysis of jointed rotor. Proc IMechE, Part C: J Mechanical Engineering Science2014; 228: 646–663.
5.
SunWLiTYangD, et al. Dynamic investigation of aeroengine high pressure rotor system considering assembly characteristics of bolted joints. Eng Fail Anal2020; 112: 104510–104523.
6.
LiYWenCLuoZ, et al. Vibration analysis of a multi-disk bolted joint rotor-bearing system subjected to fixed-point rubbing fault. Int J Non Linear Mech2022; 146: 104165–104179.
7.
LuoZLiYLiL, et al. Nonlinear dynamic properties of the rotor-bearing system involving bolted disk-disk joint. Proc IMechE, Part C: J Mechanical Engineering Science2021; 235: 4884–4899.
8.
Mir-HaidariSEBehdinanK. Nonlinear effects of bolted flange connections in aeroengine casing assemblies. Mech Syst Signal Process2022; 166: 108433–108447.
9.
BeaudoinMABehdinanK. Analytical lump model for the nonlinear dynamic response of bolted flanges in aero-engine casings. Mech Syst Signal Process2019; 115: 14–28.
10.
LiangMYanTHuJ, et al. Effect of rolling bearing parameters on the nonlinear dynamics of offset rotor. Proc IMechE, Part C: J Mechanical Engineering Science2020; 234: 2968–2978.
11.
YangYOuyangHYangY, et al. Vibration analysis of a dual-rotor-bearing-double casing system with pedestal looseness and multi-stage turbine blade-casing rub. Mech Syst Signal Process2020; 143: 106845–106869.
12.
LiFLiXQuX, et al. Nonlinear characteristic analysis of shaft-bearing-pedestal system considering damage of cylindrical roller bearing. Int J Non Linear Mech2023; 150: 104337–104354.
13.
AL-ShudeifatMAShiryayevOAl HammadiF, et al. Post-resonance backward whirl in accelerating cracked rotor systems. Eur J Mech A/Solids2020; 83: 104039–104053.
14.
HongJYangZWangY, et al. Combination resonances of rotor systems with asymmetric residual preloads in bolted joints. Mech Syst Signal Process2023; 183: 109626–109647.
15.
YangTMaHQinZ, et al. Coupling vibration characteristics of the shaft-disk-drum rotor system with bolted joints. Mech Syst Signal Process2022; 169: 108747–108778.
16.
ZhaoRJiaoYChenZ, et al. Nonlinear analysis of a dual-disk rotor system considering elastoplastic contact. Int J Non Linear Mech2022; 141: 103925–103942.
17.
WangLWangAJinM, et al. Nonlinear dynamic response and stability of a rod fastening rotor with internal damping effect. Arch Appl Mech2021; 91: 3851–3867.
18.
WangLWangAJinM, et al. Nonlinear effects of induced unbalance in the rod fastening rotor-bearing system considering nonlinear contact. Arch Appl Mech2020; 90: 917–943.
19.
WuXJiaoYChenZ, et al. Establishment of a contact stiffness matrix and its effect on the dynamic behavior of rod-fastening rotor bearing system. Arch Appl Mech2021; 91: 3247–3271.
20.
DuBQinZLuQ, et al. Dynamic modeling of tie-bolt rotors via fractal contact theory and virtual material method. Proc IMechE, Part C: J Mechanical Engineering Science2022; 236: 5900–5915.
21.
ZhaoSZhangLZhuR, et al. Modeling approach for flexible shaft-disk-drum rotor systems with elastic connections and supports. Appl Math Model2022; 106: 402–425.
22.
ZhaoSZhangXZhangS, et al. A unified modeling approach for rotating flexible shaft-disk systems with general boundary and coupling conditions. Int J Mech Sci2022; 218: 107073–107090.
23.
YuPLiLChenG, et al. Dynamic modelling and vibration characteristics analysis for the bolted joint with spigot in the rotor system. Appl Math Model2021; 94: 306–331.
24.
ZhangYLiuSXiangL, et al. Dynamic analysis of a multi-disk rod fastening rotor system with rub-impact based on multiple parameters. Nonlinear Dyn2022; 107: 2133–2152.
25.
ZhangYXiangLHuA, et al. Nonlinear dynamic response on multi-fault rod fastening rotor with variable parameters. Appl Math Model2023; 114: 147–161.
26.
BerneALLeont’evMKNizametdinovFR, et al. Investigation of bending stiffness for flange joint of GTE Rotor. Mech Solids2019; 54: 435–439.
27.
LiJYangZRenQ, et al. Study on the bistable vibration behaviour of a rod-fastened rotor-bearing system. Nonlinear Dyn2022; 109: 609–629.
28.
LiJLiYCuiL, et al. Nonlinear dynamic behavior of circumferential rod fastened rotor with initial thermal deflection. J Vib Eng Technol2022; 10: 767–780.
29.
ZhouYLuoZBianZ, et al. Nonlinear vibration characteristics of the rotor bearing system with bolted flange joints. Proc IMechE, Part K: J Multi-body Dynamics2019; 233: 910–930.
30.
LiYLuoZLiuJ, et al. Dynamic modeling and stability analysis of a rotor-bearing system with bolted-disk joint. Mech Syst Signal Process2021; 158: 107778–107800.
31.
LiuYYuanQLiP, et al. Modal analysis for a Rod-Fastened rotor considering contact effect based on double fractal model. Shock Vib2019; 2019: 1–10.
32.
ZhuYLiFHuY. The contact characteristics analysis for rod fastening rotors using ultrasonic guided waves. Measurement2020; 151: 107149–107160.
33.
ZouCXiaHChenK, et al. Research on the identification method of the pre-tightening state of the matching surface of the aero-engine disk-drum rotor. Eng Fail Anal2022; 136: 106208–106227.
34.
LiuJTangCPanG. Dynamic modeling and simulation of a flexible-rotor ball bearing system. J Vib Control2022; 28: 3495–3509.
35.
LiYWenCLuoZ, et al. Dynamic characteristics analysis of a dual-rotor system with bolted-disk joint. Proc IMechE, Part C: J Mechanical Engineering Science2023; 237: 534–548.
36.
GaoTCaoS. Paroxysmal impulse vibration phenomena and mechanism of a dual–rotor system with an outer raceway defect of the inter-shaft bearing. Mech Syst Signal Process2021; 157: 107730–107746.
37.
TamrakarRDas MittalNSinghRK. Experimental comparison of response for healthy and cracked overhung rotor system. Arab J Sci Eng2021; 46: 11701–11710.
38.
LiLLuoZWuF, et al. Frequency spectrum analysis of the rotor system with bolted joint: numerical and experimental verification. Appl Math Model2023; 118: 745–761.
39.
JinYLuKHuangC, et al. Nonlinear dynamic analysis of a complex dual rotor-bearing system based on a novel model reduction method. Appl Math Model2019; 75: 553–571.
40.
LiLLuoZHeF, et al. Experimental and numerical investigations on an unbalance identification method for full-size rotor system based on scaled model. J Sound Vib2022; 527: 116868–116886.
41.
WangNLiuCJiangD. Experimental analysis of dual-rotor-support-casing system with blade-casing rubbing. Eng Fail Anal2021; 123: 105306–105321.
42.
LiYLongTLuoZ, et al. Numerical and experimental investigations on dynamic behaviors of a bolted joint rotor system with pedestal looseness. J Sound Vib2024; 571: 118036–118054.
43.
PanWLiXLingL, et al. Dynamic modeling and response analysis of rub-impact rotor system with squeeze film damper under maneuvering load. Appl Math Model2023; 114: 544–582.
44.
YangYOuyangHJZengJ, et al. Investigation on dynamic characteristics of a rod fastening rotor-bearing coupling system with fixed-point rubbing. Appl Math Mech2022; 43: 1063–1080.
