Abstract
Wire arc additive manufacturing is the derivative of the metal AM process based on arc welding and a preferred technology for manufacturing large metallic components with medium to low complexity. The major problem with the WAAM process arises due to severe heat accumulation within the built structure and repeated heating-cooling cycles during layer-by-layer material deposition. Therefore, the interlayer time interval influences the microstructure and mechanical properties of the components. This paper has characterized the impact of interlayer cooling time on the microstructure and mechanical properties of SS-316L build. The local thermal cycle causes a non-uniform cooling rate, which alters the structure of the grains. The grain size decreases with increased interlayer time interval due to a faster cooling rate brought on by the low inter-pass temperature. A wider and smaller wall was deposited with less time interval. X-ray diffraction analysis confirms the formation of austenite and ferrite phases in all WAAM components with a slight difference in intensity. The wall constructed with a maximum time interval has a maximum value of average Vickers micro-hardness 244.00 HV0.5 and possesses the least coefficient of friction due to its improved property by the formation of fine grains. The maximum volume of materials was worn out from the wall deposited with lesser cooling time. The designed numerical model predicts the peak temperature and heat accumulation within the built structure which further relates to the morphological and mechanical properties of printed parts.
Get full access to this article
View all access options for this article.