Characterization of the distribution-nozzle operation for mixture homogenization by a late-diesel-injection strategy

Abstract

In order to realize a homogeneous combustion process it is necessary to decouple this combustion process from fuel injection. This homogeneous combustion process requires the charge to be homogeneous prior to simultaneous volumetric ignition. This kind of ignition is a self-ignition process requiring control of the ignition timing. A late-injection strategy as used in a conventional diesel engine permits control of the ignition timing; however, the time available for mixture formation and the homogenization process is very limited. The present paper deals with a distribution-nozzle concept which combines both strategies: a late-injection strategy for controlling the ignition timing with significantly accelerated fuel distribution in space and corresponding mixture homogenization. The distribution-nozzle concept combines a conventional diesel nozzle with a porous element (ring) positioned in proximity to the nozzle outlet. Because of multi-jet splitting as a result of the diesel-jet interaction with a porous structure, the fuel leaving the porous ring spreads widely in space. Additionally, a very effective fuel vaporization process occurs within the porous structure, supporting quick mixture formation. The paper describes both the fuel distribution in space and its vaporization for different configurations of the distribution elements, the injection pressure, and the porous ring temperature. In comparison with a free diesel injection, the distribution nozzle results in a significantly increased fuel surface area, a reduced jet penetration length, a reduced jet velocity, and very quick fuel vaporization. This process is three dimensional in nature. Depending on the distribution-element structure, the geometry, and its temperature, as well as the injection pressure, the contributions of multi-jet splitting, and fuel vaporization, are different with respect to the surface area, penetration length, and exit velocity, as well as intensity distribution. Generally, at higher injection pressures these parameters are less temperature dependent, except for the fact that the intensity distribution is a function of the fuel vapour’s concentration.

Keywords

distribution nozzle operation mixture homogenization late-injection strategy

Get full access to this article

View all access options for this article.

References

Hillon

Chauvin

Petit

Controlling the start of combustion on an HCCI diesel engine. In Proceedings of the 2008 American Control Conference, Seattle, Washington, USA, 11–13 June 2008, paper ThA09.5 (IEEE, New York).

Berntsson

A. W.

Denbratt

HCCI combustion using charge stratification for combustion control. SAE paper 2007-01-0210, 2007.

Bücker

Ch.

Krebber-Hortmann

Mori

Evaluation of different operation strategies for the controlled auto ignition combustion process. In Proceedings of the Congress on Controlled auto ignition, Haus der Technik Essen, Germany, 20–21 October 2005.

Zhao

(Ed.) HCCI and CAI engines for the automotive industry, 2007 (Woodhead, Cambridge).

Arcoumanis

Kamimoto

(Eds) Flow and combustion in reciprocating engines, 2009 (Springer, Berlin).

Cao

Zhao

Jiang

Kalin

Investigation into the effect of injection timing on stoichiometric and lean CAI operation in a 4-stroke GDI engine. SAE paper 2006-01-0417, 2006.

Lavy

Dabadie

J. C.

Duret

Angelberger

Le Coz

J. F.

Cherel

Controlled auto-ignition (CAI): a new highly efficient and near-zero NO_x emission combustion process for gasoline engine application. In A new generation of engine combustion processes for the future? IFP International Congress (Ed. Duret

), Rueil-Malmaison, France, 2001, pp. 101–114 (Editions Technip, Paris).

Coma

Gastaldi

Hardy

J. P.

Maroteaux

HCCI combustion: dream or reality? In Proceedings of the 13th Aachen Colloquium on Vehicle and engine technology, Aachen, Germany, 2004, pp. 513–524 (Aachem University, Aachen).

Caton

P. A.

Song

H. H.

Kaahaaina

N. B.

Edwards

C. F.

Strategies for achieving residual effected homogeneous charge compression ignition using variable valve actuation. SAE paper 2005-01-0165, 2005.

10.

Guezennec

Midlam-Mohler

Rizzoni

Haas

Berner

Bargende

Mixed-mode diesel HCCI/DI with external mixture preparation. In Proceedings of the FISITA 2004 World Automotive Congress, Barcelona, Spain, 23–27 May 2004, paper F2004V258 (FISITA, London).

11.

Okude

Mori

Shiino

Moriya

Premixed compression ignition (PCI) combustion for simultaneous reduction of NO_x and soot in diesel engine. SAE paper 2004-01-1907, 2004.

12.

Yamada

Ohtomo

Yoshi

Tezaki

Controlling mechanism of ignition enhancing and suppressing additives in premixed compression ignition. Int. J. Engine Res., 2005, 6(4), 331–340.

13.

Choi

Miles

P. C.

Yun

Reitz

R. D.

A parametric study of low-temperature, late injection combustion in a HSDI diesel engine. JSME Int. J., Ser. B, 2005, 48(4), 656–664.

14.

Weclas

Porous media in internal combustion engines. In Cellular ceramics – structure, manufacturing, properties and applications (M. Scheffler and P. Colombo), 2005 (Wiley–VCH, Weinheim).

15.

Weclas

High velocity CR diesel jet impingement on to porous structure and its utilization for mixture homogenization in I.C. engines. In Proceedings of the DITICE Workshop on Drop/wall interaction: industrial applications, experiments and modeling, Bergamo, Italy, 19 May 2006.

16.

Weclas

Some fundamental observations on the diesel jet ‘destruction’ and spatial distribution in highly porous structures. J. Porous Media, 2008, 11(2), 125–145.

17.

Weclas

Faltermeier

Diesel jet impingement on small cylindrical obstacles formixture homogenization by late injection strategy. Int. J. Engine Res., 2007, 8(5), 399–413.

18.

Weclas

Homogenization of liquid distribution in space by diesel jet interaction with porous structures and small obstacles. In Proceedings of the 22nd European Conference on Liquid atomization and spray systems, Como, Italy, 8–10 September 2008, paper ID ILASS08-A003 (ILASS).

19.

Weclas

Cypris

‘Distribution-nozzle’ concept: a method for diesel spray distribution in space for charge homogenization by late injection strategy. In Proceedings of the 23rd Annual Conference on Liquid atomization and spray systems, Brno, Czech Republic, 6–8 September 2010, paper ILASS10-40 (ILASS).