A mathematical model of the trailer relay emergency valve used in the pneumatic braking systems of agricultural trailers has been presented. The differential equations of the model allow for the inertia of control elements, static and kinetic friction, and heat exchange in individual valve chambers. The developed mathematical valve model was used for simulation of the transient processes in the dual-line braking system of a single-axle agricultural trailer. The computer models for individual components of the braking system were made within the program MATLAB/Simulink in the form of S-function-type functional structural blocks based on original algorithms. The positive results of validation of the trailer braking system computer model show a potential for a wider use of dynamic computations in the computer-aided process of designing pneumatic vehicle braking systems.
ChouM.XiaX.KayserC.Modelling and model validation of heavy-haul trains equipped with electronically controlled pneumatic brake systems. Control Engng Practice, 2007, 15(4), 501–509.
2.
CantoneL.CrescentiniE.VerziccoR.VulloV.A numerical model for the analysis of unsteady train braking and releasing manoeuvres. Proc. IMechE, Part F: J. Rail and Rapid Transit, 2009, 223(3), 305–317.
3.
LimpertL.Brake design and safety, 1999 (SAE International, Warrendale, Pennsylvania).
4.
MaE.WanX.LiS.Research on the braking system for tractor trailers. Agric. Equipment Veh. Engng, 2006, (9), 57–59.
5.
Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking. ECE Regulation No. 13, UN Economic Commission for Europe, Geneva, Switzerland, 2001.
6.
ReeßingM.DöringU.BrixT.The future of product development. Part 4: modeling of heterogeneous systems in early design phases, 2007 (Springer, Berlin).
7.
AcarmanT.OzgunerU.HatipogluC.IguskyA.Pneumatic brake system modeling for systems analysis. SAE paper 2000-01-3414, 2000.
8.
HatipogluC.HaiY.OzgunerU.Self-optimizing brake control design for commercial vehicles. SAE paper 2001-01-2731, 2001.
9.
ZhangH.WuJ.ZhangY.ChenL.Objected oriented modelling and simulation of pneumatic brake system with ABS. In Proceedings of the IEEE Intelligent Vehicle Symposium, Xi’an, Shaanxi, People’s Republic of China, 3–5 June 2009, pp. 780–785 (IEEE, New York).
10.
SubramanianS. C.DarbhaS.RajagopalK. R.Modelling the pneumatic subsystem of a S-cam air brake system. Trans. ASME, J. Dynamic Systems, Measmt Control, 2004, 126, 36–46.
11.
SubramanianS. C.DarbhaS.RajagopalK. R.A diagnostic system for air brakes in commercial vehicles. IEEE Trans. Intell. Transpn Systems, 2006, 7(3), 360–376.
12.
GunturR. R.WongJ. Y.Some design aspects of anti-lock brake systems for commercial vehicles. Veh. System Dynamics, 1980, 9, 149–180.
13.
YanakievD.KanellakopoulosI.Longitudinal control of automated CHVs with significant actuator delays. IEEE Trans. Veh. Technol., 2001, 50(5), 1289–1297.
14.
LuX.HedrickJ. K.Longitudinal control design and experiment for heavy-duty trucks. In Proceedings of the American Control Conference, 4–6 June 2003, vol. 1, pp. 36–41 (IEEE, New York).
15.
KienhoferF. W.MillerJ. I.CebonD.Design concept for an alternative heavy vehicle ABS system. Veh. System Dynamics, 2008, 46, Suppl., 571–583.
16.
BuF.TanH.-S.Pneumatic brake control for precision stopping of heavy-duty vehicles. IEEE Trans. Control Systems Technol., 2007, 15(1), 53–64.
17.
MahantyS.SubramanianS. C.Model based analysis of a heavy commercial vehicle with an electropneumatic brake towards antilock braking systems. In Proceedings of the 2009 IEEE International Conference on Vehicular electronics and safety, Pune, India, 11–12 November 2009, pp. 135–140 (IEEE, New York).
18.
PauwelussenJ. P.GootjesL.SchröderC.KohneK. U.JansenS.SchmeitzA.Full vehicle ABS braking using the SWIFT rigid ring tyre model. Control Engng Practice, 2003, 11(2), 199–207.
19.
JaiswalM.MavrosG.RahnejatH.KingP. D.Influence of tyre transience on anti-lock braking. Proc. IMechE, Part K: J. Multi-body Dynamics, 2010, 224(1), 1–17.
20.
KuleszaZ.SiemieniakoF.Modeling the air brake system equipped with brake and relay valves. Scientif. J. Marit. Univ. Szczecin, 2010, 24(96), 5–11.
21.
KamińskiZ.Determination of flow coefficient of pneumatic pipelines. Pneumatyka, 2008, 68(3), 33–36.
NėmethH.PalkovicsL.HangosK. M.Nonlinear modelling and model verification of a single protection valve. Period. Politech. Ser. Transpn Engng, 2002, 30(1–2), 69–92.
24.
NatarajanS. V.SubramanianS. C.DarbhaS.RajagopalK. R.A model of the relay valve used in an air brake system. Nonlinear Analysis: Hybrid Systems, 2007, 1(3), 430–442.
KamińskiZ.Dynamic calculations of pneumatic relay valve. Acta Mech. Autom., 2009, 3(1), pp. 62–64.
27.
NėmethH.AilerP.HangosK. M.Unified model simplification procedure applied to a single protection valve. Control Engng Practice, 2005, 13(3), 315–326.
28.
HeL.WangX.ZhangY.WuJ.ChenL.Modeling and simulation vehicle air brake system. In Proceedings of the 8th Modelica Conference, Dresden, Germany, 20–22 March 2011, pp. 430–435 (Modelica Association, Linköping).
29.
MiatlukM.KamińskiZ.Brake systems of road vehicles. Calculations, 2005 (Wydawnictwo Politechniki Białostockiej, Białystok).
30.
MiatlukM.KamińskiZ.CzabanJ.Characteristic features of the airflow of pneumatic elements of agricultural vehicles. Commn Motorization Power Industry Agric., 2003, 3, 174–181.
31.
Armstrong-HelouvryB.DupontP.Canudas de WitC.A survey of models analysis tools and compensation methods for the control of machines with friction. Automatica, 1994, 30(7), 1083–1138.
