Coaxial-coupling traction control for a four-wheel-independent-drive electric vehicle on a complex road

Abstract

An independent-wheel-drive electric vehicle has the advantage of better implementation of precise motion and stability control. However, when the vehicle is moving on a road that has complex slopes and various adhesion coefficients and is subjected to the structural limitations of the independent-wheel-drive systems, the driving performance will deteriorate. In order to make full use of the drive torque of every motor to improve the vehicle’s climbing and accelerating abilities, on the basis of the designs of a dual-motor coaxial-coupling independent-wheel-drive system and a sliding-mode controller, a coaxial-coupling traction control system was developed. Simulations on coaxial-coupling traction control for a four-wheel-independent-drive electric vehicle were completed. With the innovative coaxial-coupling equipment, the drive torque can be satisfactorily transferred between the wheels at the two sides of one drive shaft. When one of the driving wheels begins to slip, the torque transmission will increase rapidly, the probability that wheel slipping occurs will be reduced and the vehicle’s driving force can be enhanced. Also, the chatter of the traction control system can be quietened effectively, and the dynamicity and trafficability can be improved. In addition, with the additional yaw moment generated by the torque coupling, the system also has the auxiliary effect of improving the high-velocity lateral stability of the vehicle on a road which has a low adhesion coefficient.

Keywords

Four-wheel-independent-drive electric vehicle trafficability coaxial coupling traction control viscous coupling

Get full access to this article

View all access options for this article.

References

Tahami

Farhanghi

Kazemi

. A fuzzy logic direct yaw-moment control system for all-wheel-drive electric vehicles. Veh System Dynamics 2004; 41(3): 203–221.

Wang

. Fault-tolerant control with active fault diagnosis for four-wheel independently driven electric ground vehicles. IEEE Trans Veh Technol 2011; 60(9): 4276–4287.

Hori

. Future vehicle driven by electricity and control – research on four-wheel motored “UOT Electric March II”. IEEE Trans Ind Electron 2004; 51(5): 954–962.

Xiong

Wang

. Vehicle dynamics control of four in wheel motor drive electric vehicle using gain scheduling based on tyre cornering stiffness estimation. Veh System Dynamics 2012; 50(6): 831–846.

Hori

Toyoda

Tsuruoka

. Traction control of electric vehicle: basic experimental results using the test EV “UOT Electric March”. IEEE Trans Ind Applic 1998; 34(5): 1131–1138.

Francesco

Aldo

Leo

. The effect of half-shaft torsion dynamics on the performance of a traction control system for electric vehicles. Proc IMechE Part D: J Automobile Engineering 2012; 226(9): 1145–1159.

Wang

Jin

. Independent wheel torque control of 4WD electric vehicle for differential drive assisted steering. Mechatronics 2011; 21(1): 63–76.

Maeda

Fujimoto

Hori

. Four-wheel driving-force distribution method for instantaneous or split slippery roads for electric vehicle with in-wheel motors. In: 12th IEEE international workshop on advanced motion control, Sarajevo, Bosnia and Herzegovina, 25–27 March 2012, pp. 1–6. New York: IEEE.

Zhu

Jin

. Real-time yaw rate prediction based on a non-linear model and feedback compensation for vehicle dynamics control. Proc IMechE Part D: J Automobile Engineering 2013, 227(10): 1431–1445.

10.

Sangmin

Maru

Myoungho

. Traction control using a throttle valve based on sliding mode control and load torque estimation. Proc IMechE Part D: J Automobile Engineering 2005; 219(5): 645–653.

11.

Mohan

. Comprehensive theory of viscous coupling operation. SAE paper 2004-01-0867, 2004.

12.

Mohan

Ramarao

Stephens

. Viscous couplings in 4WD vehicles: application of computational modelling. SAE paper 920611, 1992.

13.

Wolfgang

. A viscous coupling in the drive train of an all-wheel-drive vehicle. SAE paper 860386, 1986.

14.

Liu

Xia

Chen

. The calculation method for shear torque of liquid viscous coupling (in Chinese). Automotive Engineering 2003; 25(1): 30–33.

15.

Pacejka

. Tyre and vehicle dynamics. Oxford: Butterworth –Heinemann, 2006, pp. 172–190.

16.

Tahami

Kazemi

Farhanghi

. A novel driver assist stability system for all-wheel-drive electric vehicles. IEEE Trans Veh Technol 2003; 52(3): 683–692.

17.

Edwards

Spurgeon

. Sliding mode control: theory and applications. London: Taylor & Francis, 1998.

18.

Kang

. Coordinated vehicle traction control based on engine torque and brake pressure under complicated road conditions. Veh System Dynamics 2012; 50(9): 1473–1494.

19.

Yamakawa

Kojima

Watanabe

. A method of torque control for independent wheel drive vehicles on rough terrain. J Terramech 2007; 44: 371–381.

20.

Guo

Guan

. Modelling of driver/vehicle directional control system. Veh System Dynamics 1993; 22(1): 141–184.

21.

Song

Kong

Huang

. Vehicle velocity estimation for real-time dynamic stability control. Int J Automot Technol 2009; 10(6): 675–685.

22.

Wang

Ding

. An improved self-adaptive algorithm of vehicle reference speeds for ABS. In: IEEE international conference on vehicular electronics and safety, Beijing, People’s Republic of China, 13–15 December 2006, pp. 98–102. New York: IEEE.

23.

Pusca

Ait-Amirat

Berthon

. Modeling and simulation of a traction control algorithm for an electric vehicle with four separate wheel drives. In: IEEE 56th vehicular technology conference, Vancouver, British Columbia, Canada, 24–28 September 2002, Vol 3, pp. 1671–1675. New York: IEEE.

24.

ISO 3888-1:1999 Passenger cars – test track for a severe lane-change manoeuvre – Part 1: double lane-change. Geneva: International Organization for Standardization, 1999.