Finite element analysis and experimental investigations of the back case of a transmission with a central brake

Abstract

Because of limitations in the vehicle layout, a central brake system was installed directly on the transmission’s back case of a certain type of medium-size truck. Under the condition of emergency braking, the back case easily fails because of the large braking torque. In this paper, a method of structure improvement, finite element analysis and experimental investigations of the transmission’s back case was proposed. Two improved designs of the back case are discussed. The finite element analysis results indicated that the improved back case was capable of bearing the maximum braking torque, which was also verified by vehicle road tests and torque tests. The modal analysis results implied that the lowest free modal frequency of the improved back case was increased and far away from the engine excitation frequency. In addition, the first-order constrained modal frequency was also greater than the gear meshing frequency. The overall results implied that the improved design of the transmission’s back case was applicable under normal conditions, and the proposed method was sufficiently accurate for wide use.

Keywords

Transmission’s back case central brake finite element analysis modal analysis

Get full access to this article

View all access options for this article.

References

Popovic

Ivanovic

Mitrovic

Subic

. Design for reliability of a vehicle transmission system. Proc IMechE Part D: J Automobile Engineering 2012; 226(2): 194–209.

. FEM modal analysis of minicar gearbox (in Chinese). Higher Educ Res 2007; 24(3): 95–97.

Zhang

Luo

Peng

. Strength analysis of automotive magnesium alloy gearbox housing (in Chinese). Mech Sci Technol 2004; 23(2): 154–156.

Sonsino

. Structural durability of cast aluminum gearbox housings of underground railway vehicles under variable amplitude loading. Int J Fatigue 2005; 27: 944–953.

Ogata

Suzuki

Hiraoka

. Development of topology optimization method for reduction of transmission housing weight. SAE paper 2005-01-1699, 2005.

Morgado

Branco

Infante

. A failure study of housing of the gearboxes of series 2600 locomotives of the Portuguese Railway Company. Engng Failure Analysis 2007; 15: 154–164.

Stilwell

Jamaluddin

Wilson

. Boundary conditions affecting gear whine of a gearbox housing acting as a structural member. SAE paper 2009-01-2031, 2009.

Deng

Kang

. Strength analysis of heavy truck transmission housing based on multi-parts contact (in Chinese). Mach Des Mfg 2009; 4: 111–113.

Wang

. Finite element static analysis on heavy-duty truck gearbox housing. Advd Mater Res 2010; 37: 491–495.

10.

Dai

Peng

Wang

. Cutting stiffness analysis of a gearbox’s back case based on FEA. Advd Mater Res 2011; 354: 548–551.

11.

Jia

. Cracking analysis and improvement of flywheel, clutch and transmission housing (in Chinese). Automot Technol 2004; 4: 9–12.

12.

Tang

Zhan

Fang

. Finite element analysis of auxiliary transmission based on dynamic simulation (in Chinese). J Central South Univ: Nat Sci Edn 2006; 37(4): 769–774.

13.

Abbes

Fakhfakh

Haddar

Maalej

. Effect of transmission error on the dynamic behaviour of gearbox housing. Int J Advd Mfg Technol 2006; 34: 211–218.

14.

Wang

Xiang

. Modal investigation of a certain transmission housing (in Chinese). Automot Engng 2007; 29(8): 673–676.

15.

Shi

Wang

Jiang

. Finite element modal analysis and improved design of agricultural machinery gearbox (in Chinese). J Zhejiang Univ Technol 2010; 32(2): 229–232.

16.

. Design and analysis of automotive transfer case (in Chinese). Lightweight Veh Technol 2011; 4: 26–29.

17.

China National Standard GB 12676-1999 Road vehicle – braking systems structure – structure, performance and test methods (in Chinese). Beijing: State Administration for Machinery Industry of China, 1999.

18.

Gong

Geng

. Finite element analysis of transmission back case based on HyperMesh (in Chinese). Electromech Engng 2007; 36(9): 26–28.

19.

Bóka

Lovas

Márialigeti

Trencséni

. Engagement capability of face-dog clutches on heavy duty automated mechanical transmissions with transmission brake. Proc IMechE Part D: J Automobile Engineering 2010; 224: 1125–1139.

20.

Yang

Han

. Research on the inherent characteristics of automotive transmission housing considering the assembly relationship (in Chinese). Mech Sci Technol 2008; 27(3): 382–385.

21.

Chen

. Research on dynamic simulation and life prediction of heavy vehicle transmission based on finite element method (in Chinese). Doctoral Dissertation, Jilin University, Changchun, Jilin, People’s Republic of China, 2009.

22.

Fabrizio

Enrico

Mauro

Alessandro

. Automated manual transmission with a torque gap filler. Part 1: kinematic analysis and dynamic analysis. Proc IMechE Part D: J Automobile Engineering 2014; 228(11): 1247–1261.