Determination of the collision speed of a vehicle from evaluation of the crush volume using photographs

Abstract

In accident reconstruction analysis of a collision between modern vehicles which have a three-dimensional frontal shape, classical two-dimensional crush measurement and modelling have apparent limits. In this paper, a new model which can calculate the collision speed from the three-dimensional crush volume estimated using two-dimensional photographic data of the collision crush shape is presented. The equation for the crush volume and the collision speed include the mass of the vehicle, and it is composed as a single equation, disregarding the size of the vehicle. The optimal coefficients were obtained through least-squares curve fitting using National Highway Traffic Safety Administration collision test data, and they were validated through actual vehicle collision tests. Additionally, a photogrammetry method using only photographic data of the collision is suggested for immediate application in reconstruction analysis of an actual accident, which can make the measurement of the crush volume relatively convenient and accurate.

Keywords

Collision speed of a vehicle crush volume photogrammetry three-dimensional crush model accident reconstruction

Get full access to this article

View all access options for this article.

References

Campbell

. Energy basis for collision severity. SAE paper 740565, 1974.

Prasad

. CRASH3 damage algorithm reformulation for front and rear collisions. SAE paper 900098, 1990.

Wood

. Comparison of modelled and actual car dynamic frontal crush. SAE paper 980027, 1998.

Vangi

Begani

. Performance of triangle method for evaluating energy loss in vehicle collisions. Proc IMechE Part D: J Automobile Engineering 2011; 226(3): 338–347.

Rentschler

Uffenkamp

. Digital photogrammetry in anlaysis of crash tests. SAE paper 1999-01-0081, 1999.

Fenton

Johnson

LaRocque

. Using digital photogrammetry to determine vehicle crush and equivalent barrier speed (EBS). SAE paper 1999-01-0439, 1999.

Erickson

Bauer

Hayes

. The accuracy of photo-based three-dimensional scanning for collision reconstruction using 123D Catch. SAE paper 2013-01-0784, 2013.

Rucoba

Duran

Carr

Erdeljac

. A three-dimensional crush measurement methodology using two-dimensional photographs. SAE paper 2008-01-0163, 2008.

Várkonyi-Kóczy

Rövid

Várlaki

. Intelligent 3D car-body deformation modeling. In: IEEE 2nd international conference on systems, Martinique, Lesser Antilles, 22–28 April 2007, p. 48. New York: IEEE.

10.

Jin

Zhang

. Geometry features measurement of traffic accident for reconstruction based on close-range photogrammetry. Adv Engng Software 2009; 40(7): 497–505.

11.

Ryu

. Estimation of collision speeds based on 3-dimensional measurement of vehicle crush (in Korean). PhD Dissertation, University of Seoul, Seoul, Republic of Korea, 2011.

12.

NHTSA. NHTSA vehicle Crash Test Database, National Highway Traffic Safety Administration, Washington, DC, USA, http://www-nrd.nhtsa.dot.gov/database/veh/veh.htm (2014, October).

13.

Park

Han

. Using frontal crush for collision speed estimation in reconstruction analysis of uncertain traffic accidents (in Korean). J Transp Res 2010; 17(2): 49–60.

14.

Han

Kang

. Three-dimensional crush scanning methods for reconstruction of vehicle collision. Int J Automot Technol 2015 (under review).

15.

Neale

Hseesel

Terpstra

. Photogrammetric measurement error associated with lens distortion. SAE paper 2011-01-0286, 2011.