The coupled vibro-acoustic response of a sedan is analysed, and the effect of the folding rear-seat aperture is studied. First, a simplified model of an acoustic cavity that consists of two adjacent boxes connected by an aperture is modelled. An analytical solution is proposed to calculate the acoustic eigenfrequencies of the simplified model. Then, the uncoupled acoustic eigenfrequencies of the actual cavity (where the trunk cavity and the cabin cavity are connected through an aperture) are computed. It is shown that the planar acoustic eigenfrequencies of the sedan can be calculated approximately using the analytical solution proposed. To clarify the effect of the folding rear-seat aperture further, the coupled vibro-acoustic response of the sedan is analysed using different case studies. It is observed that the booming noise is highly correlated with the calculated uncoupled planar acoustic eigenfrequencies.
HarrisonM.Vehicle refinement: controlling noise and vibration in road vehicles. Amsterdam: Elsevier, 2004.
2.
PietrzykABengtssonT.An investigation of the coupling between the passenger compartment and the trunk in a sedan. SAE paper 2007-01-2356, 2007.
3.
SeifzadehAPietrzykAGranssonP. Effect of coupling between passenger compartment and trunk of a car on coupled system natural frequencies using acoustic frequency response function. Appl Acoust2014; 76(4): 310–318.
4.
KangSWParkDCLeeJM. A study on the simplified coupling system of the cavity and the structure of a passenger vehicle. In: 14th international modal analysis conference, Dearborn, Michigan, USA, 12–15 February 1996, pp. 1376–1382. Bethel, Connecticut: Society for Experimental Mechanics.
5.
LimTC.Automotive panel noise contribution modeling based on finite element and measured structural–acoustic spectra. Appl Acoust2000; 60(4): 505–519.
SungSChaoSLingalaH. Structural–acoustic analysis of vehicle body panel participation to interior acoustic boom noise. SAE paper 2011-01-0496, 2011.
8.
LeeSParkKSungSH. Validation of an acoustic finite element model of an automobile passenger compartment. In: ASME 2009 international mechanical engineering congress and exposition, Lake Buena Vista, Florida, USA, 13–19 November 2009, paper IMECE2009-10843, pp. 519–525. New York: ASME.
9.
LeeSParkKSungSH. Boundary condition effect on the correlation of an acoustic finite element passenger compartment model. SAE paper 2011-01-0506, 2011.
10.
LeeJWLeeJMKimSH.Acoustic analysis of multiple cavities connected by necks in series with a consideration of evanescent waves. J Sound Vibr2004; 273(3): 515–542.
11.
AhnC-GChoiHGLeeJM.Structural–acoustic coupling analysis of two cavities connected by boundary structures and small holes. J Vibr Acoust2005; 127(6): 566–574.
12.
LeeJWLeeJM.Forced vibro-acoustic analysis for a theoretical model of a passenger compartment with a trunk – Part 2: experimental part. J Sound Vibr2007; 299(4): 918–932.
13.
HelmholtzH.Theorie der Luftschwingungen in Röhren mit offenen Enden. J Reine Angew Math1860; 57: 1–72.
14.
RayleighJWS. The theory of sound, Vols I and II. New York: Dover Publications, 1945.
15.
NielsenAK.Acoustic resonators of circular cross-section and with axial symmetry. Trans Danish Acad Tech Sci1949; 10: 9–70.
16.
IngardU.On the theory and design of acoustic resonators. J Acoust Soc Am1953; 25(6): 1037–1061.
ChanaudRC.Effects of geometry on the resonance frequency of Helmholtz resonators. J Sound Vibr1994; 178(3): 337–348.
19.
SelametARadavichPM.The effect of length on the acoustic attenuation performance of concentric expansion chambers: an analytical, computational and experimental investigation. J Sound Vibr1997; 201(4): 407–426.
20.
GuoRQiuSYuQL. Transfer path analysis and control of vehicle structure-borne noise induced by the powertrain. Proc IMechE Part D: J Automobile Engineering2012; 226(8): 1100–1109.
21.
ISO 5128:1980Acoustics – measurement of noise inside motor vehicles. Geneva: International Organization for Standardization, 1980.
22.
LeeSKChaeHC.The application of artificial neural networks to the characterization of interior noise booming in passenger cars. Proc IMechE Part D: J Automobile Engineering2004; 218(1): 33–42.
23.
LalorNPriebschH-H.The prediction of low- and mid-frequency internal road vehicle noise: a literature survey. Proc IMechE Part D: J Automobile Engineering2007; 221(3): 245–269.
24.
ShinS-HIhJ-GHashimotoT. Sound quality evaluation of the booming sensation for passenger cars. Appl Acoust2009; 70(2): 309–320.
25.
MarburgSNolteBBernhardRJ. Computational acoustics of noise propagation in fluids: finite and boundary element methods. Berlin: Springer, 2008.
26.
SandersonMAOnsayT.CAE interior cavity model validation using acoustic modal analysis. SAE paper 2007-01-2167, 2007.
27.
IngardU.Notes on acoustics. New Delhi: Laxmi Publications, 2010.
28.
RossingTD (ed). Springer handbook of acoustics. New York: Springer, 2007.
29.
WangX (ed). Vehicle noise and vibration refinement. Great Abington, Cambridge: Woodhead Publishing, 2009.
30.
DesmetW.A wave based prediction technique for coupled vibroacoustic analysis. PhD Thesis, KU Leuven, Leuven, Belgium, 1998.
31.
FriswellMMottersheadJE.Finite element model updating in structural dynamics. New York: Springer, 2013.
32.
LauwagieTAsscheRVDer StraetenJV. A comparison of experimental, operational, and combined experimental–operational parameter estimation techniques. In: International conference on noise and vibration engineering, Heverlee, Belgium, 18–20 September 2006, pp. 2997–3006. Leuven: KU Leuven.
33.
XuMZhangJHLinJW. Prediction and control of the structure-borne noise of a vehicle based on an optimization technique of the vehicle-body model. Proc IMechE Part D: J Automobile Engineering2015; 229(11): 1457–1468.
34.
GuoRZhangLJZhaoJZhouH.Interior structure-borne noise reduction by controlling the automotive body panel vibration. Proc IMechE Part D: J Automobile Engineering2012; 226(7): 943–956.
35.
JeongUCKimYDKimJS. Evaluation of the rattle noise of a vehicle seat using the coherence analysis technique. Proc IMechE Part D: J Automobile Engineering2015; 230(3): 371–381.
