Downsizing an automotive junction box based on large current-carrying printed-circuit board optimization

Abstract

An automotive junction box distributes electric power to electric systems installed in a vehicle with overcurrent protection. As a larger number of electric systems are installed, the junction box is equipped with more components, functionalities and connections. However, owing to the fuse accessibility, its installation space is so restricted that a downsized design is required for the junction box. The junction box is composed of small signal circuitry for control and monitoring, and large current-carrying circuitry for power distribution which includes many parallel traces. Because of these unique features, widely used techniques for downsizing printed-circuit boards are not applicable. Also, there is no rule for designing large current-carrying parallel traces, and it is difficult to optimize the size of the printed-circuit board for the automotive junction box. This paper presents the design rules for a printed-circuit board when downsizing a junction box. First, the layout strategy for the power distribution components is presented, which is determined by the sum of the squares of the currents flowing through connector pairs. Then, the thermal effects of parallel traces are simulated for different conditions by using thermal analysis software. Based on the results, an analytical estimation of the additional temperature rises due to parallel traces and rules for a thermally effective arrangement of the parallel traces are presented.

Keywords

Automotive junction box printed-circuit board power distribution downsize parallel traces thermal effects

Get full access to this article

View all access options for this article.

References

Stagnoli

Borin

A method for system modelling and partitioning in the definition of automotive multiplex system architectures. SAE paper 930008, 1993.

Evans

JH.

The simplification of vehicle harness designs through the application of active junction boxes. Proc IMechE Part D: J Automobile Engineering1990; 204(1): 29–33.

Kim

Lee

Sung

. Design of controller module for power distribution system in automobile CAN (controller area network) network. In: KSAE annual spring conference, Gangwon-do, Republic of Korea, 10–12 June 2004, pp. 1543–1548. Seoul: KSAE.

Torrisi

Notaro

Burlak

Evolution and trends in automotive electrical distribution systems. In: 2005 IEEE vehicle power and propulsion conference, Chicago, Illinois, USA, 7–9 September 2005, pp. 812–818. New York: IEEE.

Ming

. Architecture trends body electronics. In: Infineon ATV symposium, People’s Republic of China, 8 September 2010, pp. 1–35. Shanghai, Munich: Infineon Technologies.

Schmidt

. Automotive electronics – enabling the future of individual mobility. In: 2007 IEEE international electron devices meeting, Washington, DC, USA, 10–12 December 2007, pp. 3–8. New York: IEEE.

Doerstling

BH.

Thermal–electrical modeling of electrical subsystems. SAE paper 981111, 1998.

Zandi

Lewis

Severson

. Transient coupled thermal/electrical analysis of a printed wiring board. In: 9th intersociety conference on thermal and thermomechanical phenomena in electronic systems, Las Vegas, Nevada, USA, 1–4 June 2004, Vol 1, pp. 532–536. New York: IEEE.

Zandi

Lewis

Keyhani

. Coupled thermal/electrical analysis of high powered electrical systems. In: 10th intersociety conference on thermal and thermomechanical phenomena in electronic systems, San Diego, California, USA, 30 May–2 June 2006, pp. 101–105. New York: IEEE.

10.

Hubing

. Circuit board layout for automotive electronics. In: 2007 IEEE international symposium on electromagnetic compatibility, Honolulu, Hawaii, USA, 9–13 July 2007, pp. 1–3. New York: IEEE.

11.

IPC-2221A: 2001 Generic standard on printed board design. Northbrook, Illinois: IPC.

12.

IPC-2152: 2009 Standard for determining current carrying capacity in printed board design. Northbrook, Illinois: IPC.

13.

Hofmann

Gottschling

Schuch

Emerging systems packaging technologies. In: 2011 6th international microsystems, packaging, assembly and circuits technology conference, Taipei, Republic of China, 19–21 October 2011, pp. 291–293. New York: IEEE.

14.

Boettcher

Manessis

Ostmann

. Embedding of chips for system in package realization–technology and applications. In: 2008 3rd international microsystems, packaging, assembly and circuits technology conference, Taipei, Republic of China, 22–24 October 2008, pp. 383–386. New York: IEEE.

15.

Palm

Moisala

Kivikero

. Embedding active components inside printed circuit board (PCB) – a solution for miniaturization of electronics. In: 2005 international symposium on advanced packaging materials, Irvine, California, USA, 16–18 March 2005, pp. 1–4. New York: IEEE.

16.

Peng

Bao

. The reliability investigation of capacitors embedded PCB. In: 2011 international symposium on advanced packaging materials, Xiamen, People’s Republic of China, 25–28 October 2011, pp. 428–432. New York: IEEE.

17.

Stubbs

Pulko

Wilkinson

AJ.

An investigation of the sensitivity of embedded passive component temperatures to PCB structure. IEEE Trans Components Packaging Technol2002; 25(4): 701–707.

18.

Madou

Martens

Electrical behavior of decoupling capacitors embedded in multilayered PCBs. IEEE Trans Electromagn Compatibility2001; 43(4): 549–556.

19.

Serpaud

Tran

Poire

Cotxet

. High speed electronics on printed circuit board characterization of embedded capacitors and resistors. In: 2011 8th workshop on electromagnetic compatibility of integrated circuits, Dubrovnik, Croatia, 6–9 November 2011, pp. 131–136. New York: IEEE.

20.

Ostmann

Hofmann

Neeb

. Embedded power electronics for automotive applications. In: 7th 2012 international microsystems, packaging, assembly and circuits technology conference, Taipei, Republic of China, 24–26 October 2012, pp. 163–166. New York: IEEE.

21.

Pan

Poulson

Blair

. Current carrying capacity of copper conductors in printed wiring boards. In: 1993 IEEE electronic components and technology conference, Orlando, Florida, USA, 1–4 June 1993, pp. 1061–1066. New York: IEEE.

22.

Fan

. Combined thermal and thermomechanical modeling for a multi-chip QFN package with metal-core printed circuit board. In: 9th intersociety conference on thermal and thermomechanical phenomena in electronic systems, Las Vegas, Nevada, USA, 1–4 June 2004, Vol 2, pp. 377–382. New York: IEEE.

23.

Yung

WKC

. Using metal core printed circuit board (MCPCB) as a solution for thermal management. J HKPCA2007; 24(2): 12–16.

24.

Cho

Kim

HJ.

Metal-core printed circuit board with alumina layer by aerosol deposition process. IEEE Electron Device Lett2008; 29(9): 991–993.

25.

Adam Research. Thermal risk management in electronics, http://www.adam-research.de (2001–2016, accessed 10 June 2014).

26.

Adam

New correlation between electrical current and temperature rise in PCB traces. In: 2004 IEEE semiconductor thermal measurement and management symposium, San Jose, California, USA, 9–11 March 2004, pp. 292–299. New York: IEEE.