Simulations of gasoline engine combustion and emissions using a chemical-kinetics-based turbulent premixed combustion modeling approach

Abstract

This work presents a turbulent premixed combustion modeling approach which is based on chemical kinetics. In this approach, the smallest length scales are of the order of 0.1–1.0 mm for typical engine simulations with a Reynolds-averaged Navier–Stokes turbulence model and, after adaptive mesh refinement technology is used to consider the magnitude of the subgrid field, the Reynolds-averaged Navier–Stokes turbulent flow field can be well resolved. For solution of the flame front, an artificially thickened laminar flame concept is introduced to balance the computational accuracy and the computational cost. Around the artificially thickened laminar flame front, a special grid resolution strategy is designed, i.e. using much finer resolution in the normal direction of the flame front and typical adaptive mesh refinement resolution in the other two perpendicular directions. Then, chemical kinetics can be applied to the chemistry process which occurs in the flame front. To use this chemical-kinetics-based turbulent premixed combustion modeling approach better, a good chemical kinetics mechanism is very important. For this reason a practical primary-reference-fuel chemical kinetics mechanism is improved and validated in present work. The newly improved mechanism resolves several issues in the existing mechanisms, including unrealistically fast autoignition reactions and limited laminar flame speed validation. After reoptimization of those laminar-flame-speed-related reactions, the new mechanism can correctly compute the laminar flame speeds for a wide range of Ford spark ignition engines and for various operating conditions. Using this combustion modeling approach together with the new mechanism, simulations of the combustion and the emissions of several spark ignition engines for typical operating conditions were carried out. The simulated in-cylinder pressures, the simulated burn rates, and the simulated emissions including the brake specific carbon monoxide emissions, the nitrogen oxide emissions, and the unburned hydrocarbon emissions are compared with the experimental data, and very good agreement is found without tuning any model constants.

Keywords

Turbulent premixed combustion modeling chemical kinetics artificially thickened laminar flame grid resolution strategy spark ignition engine

Get full access to this article

View all access options for this article.

References

Veynante

Vervisch

Turbulent combustion modeling. Prog Energy Combust Sci 2002; 28: 193–266.

Ewald

Peters

. A level set based flamelet model for the prediction of combustion in spark ignition engines. In: 15th international multidimensional engine modeling user’s group meeting, Detroit, Michigan, USA, 13 April 2005.

Tan

Reitz

RD.

An ignition and combustion model for spark ignition engine multi-dimensional modeling. Combust Flame 2006; 145: 1–15.

Gouldin

. Combustion intensity and burning rate integral of premixed flames. In: 26th symposium (international) on combustion, Naples, Italy, 28 July–2 August 1996, pp. 381–388. Pittsburgh, Pennsylvania: Combustion Institute.

Peters

Turbulent combustion. Cambridge: Cambridge University Press, 2000.

Liang

Reitz

RD.

Spark ignition engine combustion modeling using a level set method with detailed chemistry. SAE paper 2006-01-0243, 2006.

Liang

Reitz

Iyer

Modeling knock in spark-ignition engines using a G-equation combustion model incorporating detailed chemical kinetics. SAE paper 2007-01-0165, 2007.

Kolla

Rogerson

Swaminathan

Validation of a turbulent flame speed model across combustion regimes. Combust Sci Technol 2010; 182(3): 284–308.

Yang

Kolla

Swaminathan

Application of an advanced turbulent flame speed combustion model on burn rate simulation of spark ignition engines. SAE paper 2016-01-0588, 2016.

10.

Givler

Mandhapati

Pomraning

Senecal

PK.

Gasoline combustion modeling of direct and port-fuel injected engines using a reduced chemical mechanism. SAE paper 2013-01-1098, 2013.

11.

Yang

Vanderwege

A preliminary research on turbulent flame propagation combustion modeling using a direct chemical kinetics model. SAE paper 2013-24-0023, 2013.

12.

Pomraning

Richards

Senecal

Modeling turbulent combustion using a RANS model, detailed chemistry, and adaptive mesh refinement. SAE paper 2014-01-1116, 2014.

13.

Patel

Shukla

Patel

. Combustion modeling of SI engine for predicting behavior of I.C. engine: a review. Int J Adv Res Engng, Sci Technol 2015; 2(6): 149–155.

14.

Turns

SR.

An introduction to combustion: concepts and applications. 3rd edition. New York: McGraw-Hill 2011.

15.

Warsi

ZUA

. Fluid dynamics: theoretical and computational approaches. Boca Raton, Florida: CRC Press, 1993.

16.

Pomraning

. Recent developments of CONVERGE CFD software for rapid and accurate in-cylinder spray and combustion modeling. In: VINAS users conference, Tokyo, Japan, 21–22 October 2010.

17.

Linse

Hasse

Durst

An experimental and numerical investigation of turbulent flame propagation and flame structure in a turbo-charged direct injection gasoline engine. Combust Theory Modeling 2009: 13(1): 167–188.

18.

Butler

O’Rourke

. A numerical method for two dimensional unsteady reacting flows. In: 16th symposium (international) on combustion, Cambridge, Massachusetts, USA, 15–20 August 1976, pp. 1503–1515. Pittsburgh, Pennsylvania: Combustion Institute.

19.

Yang

Vanderwege

Turbulent pre-mixed combustion modeling based on chemical kinetics and turbulence model with application to engine simulation. Technical Report SRR-2015-0144, Ford Research and Advanced Engineering, Dearborn, Michigan, USA, 2015.

20.

Curran

Gaffuri

Pitz

Westbrook

CK.

A comprehensive modeling study of iso-octane oxidation. Combust Flame 2002; 129(3): 253–280.

21.

Jia

Xie

A chemical kinetics model of iso-octane oxidation for HCCI engines. Fuel 2006; 85: 2593–2604.

22.

Liu

Jia

Xie

Pang

Enhancement on a skeletal kinetic model for primary reference fuel oxidation by using a semidecoupling methodology. Energy Fuels 2012; 26: 7069–7083.

23.

Lawrence Livermore National Laboratory. Combustion, Primary reference fuels (PRF): iso-octane/n-heptane mixtures, https://combustion.llnl.gov/archived-mechanisms/surrogates/prf-isooctane-n-heptane-mixture.

24.

Reitz

A reduced chemical kinetic model for IC engine combustion simulations with primary reference fuels. Combust Flame 2008; 155(4): 713–738.

25.

Yang

Modeling multi-component fuel evaporation, flame propagation, and chemical kinetics processes for GDI engines. PhD Dissertation, University of Wisconsin-Madison, Madison, Wisconsin, USA, 2010.

26.

Richards

Senecal

Pomraning

CONVERGE (version 2.1). Middleton, Wisconsin: Convergent Science Inc., 2013.

27.

Amsden

AA.

KIVA-3V: a block-structured KIVA program for engines with vertical or canted valves. Report LA-13313-MS, Los Alamos National Laboratory, Los Alamos, New Mexico, USA, 1997.

28.

Amsden

AA.

KIVA-3V, release 2: improvements to KIVA-3V. Report LA-13608-MS, Los Alamos National Laboratory, Los Alamos, New Mexico, USA, 1999.

29.

Han

Trigui

Spray/wall interaction models for multi-dimensional engine simulation. Int J Engine Res 2000; 1(1): 127–146.

30.

Han

Wooldridge

. Modeling of DISI engine sprays with comparison to experimental in-cylinder spray images. SAE paper 2001-01-3667, 2001.

31.

Han

Trigui

Stratified mixture formation and piston surface wetting in a DISI engine. SAE paper 2002-01-2655, 2002.

32.

Han

Wall film dynamics modeling for impinging sprays in engines. SAE paper 2004-01-0099, 2004.