In this study, the transient nitrogen oxide reduction performance of a urea selective catalytic reduction system installed on a non-road diesel engine was tested on an engine dynamometer bench over a scheduled non-road transient cycle mode. Based on the measurement results, the characteristics of the transient selective catalytic reduction behaviours of nitrogen oxide reduction were evaluated. Also, in this study, the effects of several thermal management strategies for improving the selective catalytic reduction efficiency was investigated by transient selective catalytic reduction simulations. The kinetic parameters of the current simulation code for selective catalytic reduction were calibrated and validated by comparison with the measurement data. As a result of this study, it was found that a thermal management strategy utilizing a partial temperature rise in the transient time domain can be an efficient approach for improving the transient selective catalytic reduction efficiency, in comparison with the temperature rise over the entire cycle period. Furthermore, this study can provide some guideline data for the magnitude and the duration of the temperature rise required to obtain the target selective catalytic reduction efficiency over the non-road transient cycle mode. In the last part of this study, the impact of the variation in the space velocity on the transient selective catalytic reduction efficiency was assessed using transient selective catalytic reduction simulations.
JohnsonT.Review of vehicular emissions trends. SAE paper 2015-01-0993, 2015.
4.
JohnsonT.Vehicular emissions in review. SAE paper 2014-01-1491, 2014.
5.
StantonDCharltonSVajapeyazulaP.Diesel engine technologies enabling powertrain optimization to meet U.S. greenhouse gas emissions. SAE paper 2013-24-0094, 2013.
6.
IwamotoMFurukawaHMineY. Copper(II) ion-exchanged ZSM-5 zeolites as highly active catalysts for direct and continuous decomposition of nitrogen monoxide. J Chem Soc, Chem Commun1986; (16): 1272–1273.
7.
LiYHallWK.Catalytic decomposition of nitric oxide over Cu-zeolites. J Catal1991; 129(1): 202–215.
8.
MorettiGDossiCFusiA. A comparison between Cu-ZSM-5, Cu–S-1 and Cu–mesoporous-silica–alumina as catalysts for NO decomposition. Appl Catal B: Environ1999; 20: 67–73.
9.
BerggrundMIngelstenHHSkoglundhMPalmqvistAEC. Influence of synthesis conditions for ZSM-5 on the hydrothermal stability of Cu-ZSM-5. Catal Lett2009; 130: 79–85.
10.
YanJYSachtlerWMHKungHH.Effect of Cu loading and addition of modifiers on the stability of Cu/ZSM-5 in lean NOx reduction catalysis. Catal Today1997; 33: 279–290.
11.
GrinstedRAJenHWMontreuilCN. The relation between deactivation of CuZSM-5 in the selective reduction of NO and dealumination of the zeolite. Zeolites1993; 13(8): 602–606.
12.
KimYJLeeJKMinKM. Hydrothermal stability of CuSSZ13 for reducing NOx by NH3. J Catal2014; 311: 447–457.
13.
WangDZhangLLiJ. NH3-SCR over Cu/SAPO-34 – zeolite acidity and Cu structure changes as a function of Cu loading. Catal Today2014; 231: 64–74.
14.
XueJWangXQiG. Characterization of copper species over Cu/SAPO-34 in selective catalytic reduction of NOx with ammonia: relationships between active Cu sites and de-NOx performance at low temperature. J Catal2013; 297: 56–64.
KwakJHTonkynRGKimDH. Excellent activity and selectivity of Cu-SSZ-13 in the selective catalytic reduction of NOx with NH3. J Catal2010; 275(2): 187–190.
17.
JohnsonT.Vehicular emissions in review. SAE paper 2013-01-0538, 2013.
18.
TannerCWTwiggsKTaoT. High porosity substrates for fast-light-off applications. SAE paper 2015-01-1009, 2015.
19.
PlessJDNaseriMKlinkW. Development of SCR on high porosity substrates for heavy duty and off-road applications. SAE paper 2014-01-152, 2014.
20.
NaseriMConwayRHessH. Development of emission control systems to enable high NOx conversion on heavy duty diesel engines. SAE paper 2014-01-1525, 2014.
21.
HiroseSYamamotoHSuenobuH. Development of high porosity cordierite honeycomb substrate for SCR application to realize high NOx conversion efficiency and system compactness. SAE paper 2014-01-1528, 2014.
22.
HiroseSMiyairiYKatsubeF. Newly developed cordierite honeycomb substrate for SCR coating realizing system compactness and low backpressure. SAE paper 2012-01-1079, 2012.
23.
JeanEMichelinJ. Improvement of the compact mixing systems for optimum SCR-filter integration on passenger cars. In: 23rd Aachen colloquium on automobile and engine technology, Aachen, Germany, 6–8 October 2014, Vol 1, pp. 303–314. Aachen: RWTH Aachen University.
24.
MichelinJGuilbaudFGuilA. Advanced compact SCR mixer: BlueBox. SAE paper 2014-01-1531, 2014.
25.
AlanoEJeanEPerrotY. Compact SCR for passenger cars. SAE paper 2011-01-1318, 2011.
26.
EichlerFKahrstedtJKöhneM. The new 2.0l 4-cylinder BiTurbo TDI® engine from Volkswagen. In: 23rd Aachen colloquium on automobile and engine technology, Aachen, Germany, 6–8 October 2014, Vol 1, pp. 93–108. Aachen: RWTH Aachen University.
27.
FischerMKojimaHMitoT. Efficiency optimization of SCR coated particle filters. In: 23rd Aachen colloquium on automobile and engine technology, Aachen, Germany, 6–8 October 2014, Vol 1, pp. 335–358. Aachen: RWTH Aachen University.
28.
SongXNaberJDJohnsonJH.A study of the effects of NH3 maldistribution on a urea-selective catalytic reduction system. Int J Engine Res2015; 16(2): 213–222.
29.
NingJYanF.Detection of injected urea quantity and correction for SCR urea dosing control. SAE paper 2015-01-1038, 2015.
30.
SunYWangYChangCLevijokiS.Detection of urea injection system faults for SCR systems. SAE paper 2012-01-0431, 2012.
31.
HagaHKojimaHFukushiN. Optimized NH3 storage control for next generation urea-SCR system. SAE paper 2015-01-1024, 2015.
32.
ZhangHWangJWangYY.Optimization of the ammonia coverage ratio references in diesel engine two-can selective catalytic reduction systems via nonlinear model predictive control. Proc IMechE Part D: J Automobile Engineering2014; 228(12): 1452–1467.
33.
MurataYTokuiSWatanabeS. Improvement of NOx reduction rate of urea-SCR system by NH3 adsorption quantity control. SAE paper 2008-01-2498, 2008.
34.
SongXJohnsonJHNaberJD.A review of the literature of selective catalytic reduction catalysts integrated into diesel particulate filters. Int J Engine Res2015; 16(6): 738–749.
35.
WangTJBaekSWLeeSY. Experimental investigation on evaporation of urea–water-solution droplet for SCR applications. AIChE J2009; 55(12): 3267–3276.
36.
SchaberPMColsonJHigginsS. Thermal decomposition (pyrolysis) of urea in an open reaction vessel. Thermochim Acta2004; 424: 131–142.
37.
BenjaminSFGallMRobertsCA.Conversion of nitric oxide in an engine exhaust by selective catalytic reduction with a urea spray under steady-state and transient engine-load conditions. Proc IMechE Part D: J Automobile Engineering2014; 228(7): 758–770.
38.
De CesareMStolaFSenniC. Fuel economy optimization of Euro 6 compliant light commercial vehicles equipped with SCR. SAE paper 2014-01-1356, 2014.
39.
CavinaNManciniGCortiE. Thermal management strategies for SCR after treatment systems. SAE paper 2013-24-0153, 2013.
40.
JayatFSeifertSFathepurkarM.Investigation of underbody metal SCR systems with active thermal management: experience update. SAE paper 2013-26-0048, 2013.
41.
PfahlUSchatzAKoniecznyR.Advanced exhaust gas thermal management for lowest tailpipe emissions – combining low emission engine and electrically heated catalyst. SAE paper 2012-01-1090, 2012.
WangTJBaekSWKwonHJ. Kinetic parameter estimation of a commercial Fe-zeolite SCR. Ind Engng Chem Res2011; 50(5): 2850–2864.
44.
ASTM D4737(10-2016)Standard test method for calculated cetane index by four variable equation. West Conshohocken, Pensylvania: ASTM International, 2016.
45.
BresslerHRammoserDNeumaierHTerresF.Experimental and predictive investigation of a close coupled catalytic converter with pulsating flow. SAE paper 960564, 1996.
