Theoretical modelling and experimental analysis of the vertical stiffness of a convoluted air spring including the effect of the stiffness of the bellows

Abstract

A new refined model including a model of the bellows to describe the vertical stiffness of a convoluted air spring is developed. The new model of a convoluted air spring incorporates the structural parameters including the effective area, the rate of change in the effective area, the effective volume, the rate of change in the effective volume and the stiffness of the bellows. Analytical models of the structural parameters of a convoluted air spring are established using a geometrical analysis approach. Two convoluted air springs (type 1B5002 and type 2B5281) are designed and manufactured for testing purposes. An experimental set-up is designed in order to carry out identification of the structural parameters and to test the vertical static stiffness and the vertical dynamic stiffness. The analytical models of the structural parameters are validated by experiments, which provide good design guidance and improvement in the convoluted air spring at the design stage. Tests on the vertical static stiffness and the dynamic stiffness indicate that the stiffness of the bellows should be considered; furthermore, the stiffness of the bellows exhibits amplitude-dependent chacteristics and frequency-dependent characteristics. In a different approach from the previous studies, a model of the bellows is developed in this paper and is composed of a smooth friction model and a fractional derivative Zener model in parallel to represent the viscoelastic properties of the bellows. It is concluded that the simulation results of the proposed new model are in good agreement with the experimental data. The new refined model may be an effective tool for predicting the mechanical behaviours of a convoluted air spring before a prototype is constructed. The proposed refined model can also be practically utilized as a guide for designing the parameters and for matching the air suspension of the vehicle.

Keywords

Convoluted air spring static stiffness dynamic stiffness model of the bellows structural parameters

Get full access to this article

View all access options for this article.

References

Fox

Roebuck

Cebon

. Modelling rolling-lobe air springs. Int J Heavy Veh Systems 2007; 14: 254–270.

Lin

Wang

Huang

. Research and analysis of stiffness properties of new vehicle air spring. Key Engng Mater 2013; 589–590: 729–734.

Liu

Wei

. Research on the vertical stiffness of a rolling lobe air spring. Proc IMechE Part F: J Rail and Rapid Transit 2016; 230: 1172–1183.

. Research on vertical stiffness of belted air springs. Veh System Dynamics 2013; 51: 1655–1673.

Wei

Lin

Chang-Geng

Zhen-Xia

. Stiffness calculation and dynamic simulation of air spring. In: ASME international design engineering technical conferences and computers and information in engineering conference, Vol 1: 20th biennial conference on mechanical vibration and noise, Parts A, B, and C, Long Beach, California, USA, 24–28 September 2005, paper DETC2005-84338, pp. 1395–1399. New York: ASME.

Quaglia

Guala

. Evaluation and validation of an air spring analytical model. Int J Fluid Power 2003; 4: 43–54.

Nieto

Morales

González

. An analytical model of pneumatic suspensions based on an experimental characterization. J Sound Vibr 2008; 313: 290–307.

Quaglia

Sorli

. Air suspension dimensionless analysis and design procedure. Veh System Dynamics 2010; 35: 443–475.

Erin

Wilson

Zapfe

. An improved model of a pneumatic vibration isolator: theory and experiment. J Sound Vibr 1998; 218: 81–101.

10.

Sorli

Quaglia

. Analysis of vehicular air suspensions. In: 4th JFPS international symposium on fluid power, Tokyo, Japan, 15–17 November 1999, pp. 389–394. Tokyo: Japan Fluid Power System Society

11.

Yin

Khajepour

Cao

. Pneumatic suspension damping characterisation with equivalent damping ratio. Int J Heavy Veh Systems 2012; 19: 314–332.

12.

Zhu

Wang

Zhang

. Research on theoretical calculation model for dynamic stiffness of air spring with auxiliary chamber. In: 2008 IEEE vehicle power and propulsion conference, Harbin, People’s Republic of China, 3–5 September 2008, paper 10394534, pp. 1–6. New York: IEEE.

13.

Wang

Zhu

. Linearized model for dynamic stiffness of air spring with auxiliary chamber. J Vibr Shock 2009; 28: 72–76.

14.

Zheng

M-J

Lin

Wang

H-H

J-Q

. Nonlinear stiffness characteristics of multilayer cystiform air spring. J Vibr Shock 2009; 28: 11–15.

15.

Chang

. Dynamic model of an air spring and integration into a vehicle dynamics model. Proc IMechE Part D: J Automobile Engineering 2008; 222(10): 1813–1825.

16.

Jiang

. Experimental and simulation study on the vibration isolation and torsion elimination performances of interconnected air suspensions. Proc IMechE Part D: J Automobile Engineering 2015; 230(5): 679–691.

17.

Sun

Cai

Wang

. Design of a hybrid model predictive controller for the vehicle height adjustment system of an electronic air suspension. Proc IMechE Part D: J Automobile Engineering 2015; 230(11): 1504–1520.

18.

Wang

Liang

Shi

. A study on the asynchronous brake lock-up of a statically indeterminate tractor with an air suspension. Proc IMechE Part D: J Automobile Engineering 2011; 226(4): 507–516.

19.

Presthus

. Derivation of air spring model parameters for train simulation. Masters Thesis, Luleå University of Technology, Luleå, Sweden, 2002.

20.

Bruni

Vinolas

Berg

. Modelling of suspension components in a rail vehicle dynamics context. Veh System Dynamics 2011; 49: 1021–1072.

21.

Mazzola

Berg

. Secondary suspension of railway vehicles – air spring modelling: performance and critical issues. Proc IMechE, Part F: Journal of Rail and Rapid Transit 2014; 228: 225–241.

22.

Liu

Zhuang

Lin

. A Study on nonlinear stiffness characteristic of air spring for a bus. SAE paper 2002-01-3092, 2002.

23.

Yuan

Zhou

. Finite element method to analyze vehicle air spring. J Mech Engng 2009; 45: 262–266.

24.

Zhu

. Nonlinear vertical stiffness of reversible sleeve air spring. J Vibr Shock 2012; 31: 77–80.

25.

Luo

. Mechanical problems of bellow type rubber spring. China Rubber Industry 1997; 44: 228–232.

26.

Zhou

Zong

Chen

. Experimental research on the stiffness of air spring. Advd Mater Res 2013; 765–767: 16–20.

27.

Asami

Yokota

Ise

. Theoretical and experimental analysis of the nonlinear characteristics of an air spring with an orifice. J Vibr Acoust 2011; 135: 1674–1685.

28.

Berg

. A model for rubber springs in the dynamic analysis of rail vehicles. Proc IMechE Part F: J Rail and Rapid Transit 1997; 211: 95–108.

29.

Diethelm

. The analysis of fractional differential equations. Berlin: Springer, 2010.

30.

Torvik

Bagley

. On the appearance of the fractional derivative in the behavior of real materials. Trans ASME, J App Mech 1984; 51: 725–728.

31.

Wharmby

Bagley

. Generalization of a theoretical basis for the application of fractional calculus to viscoelasticity. J Rheol 2013; 57: 201–210.

32.

Berg

. A non-linear rubber spring model for rail vehicle dynamics analysis. Veh System Dynamics 1998; 30: 197–212.

33.

Sjöberg

. Rubber isolators – measurements and modelling using fractional derivatives and friction. SAE paper 2000-01-3518, 2000.

34.

Lewandowski

Chorążyczewski

. Identification of the parameters of the Kelvin–Voigt and the Maxwell fractional models, used to modeling of viscoelastic dampers. Comput Structs 2010; 88: 1–17.