The performance of semi-active differential systems is deeply influenced by the way in which they are actuated. Conventional semi-active systems are actuated by pressure-controlled hydraulic actuators that, despite their good dynamical behaviour, are relatively inefficient. In this work, the authors propose an innovative controlled hydraulic pump solution that is able to drastically improve the efficiency and to reduce the overall encumbrances, maintaining very high performance in terms of dynamical behaviour and corresponding frequency response. The authors investigate design criteria of the proposed solution, describe a simulation model and validate design and simulation models with experimental data.
CheliFGiaramitaMPedrinelliMet al. A new control strategy for a semi-active differential. Part I. IFAC Proc Vol2005; 38: 140–145.
2.
CheliFPedrinelliMRestaFet al. Development of a new control strategy for a semi-active differential for a high-performance vehicle. Veh Syst Dyn2006; 44: 202–215.
3.
RestaFTeuschlGZanchettaMet al. A new control strategy for a semi-active differential. Part II. IFAC Proc Vol2005; 38: 146–151.
De RosaRRussoMRussoRet al. Optimisation of handling and traction in a rear wheel drive vehicle by means of magneto-rheological semi-active differential. Veh Syst Dyn2009; 47: 533–550.
6.
BansbachEA.Torque transfer apparatus using magnetorheological fluids. Patent 5,779,013, USA, 1998.
7.
HuntWG.Locking differential with clutch activated by magnetorheological fluid. Patent 6,428,441, USA, 2002.
8.
HuntWG.Locking differential with clutch activated by magnetorheological fluid. Patent 6,527,664, USA, 2003.
9.
GopalswamySJonesGL.Magnetorheological transmission clutch. Patent 5,823,309, USA, 1998.
10.
HeraviOFogelbergMJMcMorrisML.Control for vehicle differential. Patent 6,334,832, USA, 2002.
11.
WeißMKlockeFBarthSet al. Detailed analysis and description of grinding wheel topographies. In: ASME 2015 international manufacturing science and engineering conference, Charlotte, NC, 8–12 June 2015, pp.V001T02A006–V001T02A014. New York: ASME.
12.
ReuterDC.Locking differential with clutch activated by electrorheological fluid coupling. Patent 5,322,484, USA, 1994.
13.
AllottaBPugiLBartoliniFet al. Comparison of different control approaches aiming at enhancing the comfort of a railway vehicle. In: 2010 IEEE/ASME international conference on advanced intelligent mechatronics (AIM) (ed YaoB), Montreal, QC, 6–9 July 2010, pp.676–681. Piscataway, NJ: IEEE.
14.
AllottaBPugiLCollaVet al. Design and optimization of a semi-active suspension system for railway applications. J Mod Transp2011; 19: 223–232.
15.
ZhuXJingXChengL.Magnetorheological fluid dampers: a review on structure design and analysis. J Intell Mater Syst Struct2012; 23: 839–873.
16.
VicenteJDKlingenbergDJHidalgo-AlvarezR.Magnetorheological fluids: a review. Soft Matter2011; 7: 3701–3710.
17.
AnnicchiaricoCRinchiMPellariSet al. Design of a semi-active differential to improve the vehicle dynamics. In: Proceedings of the ASME 2014 12th biennial conference on engineering systems design and analysis, Copenhagen, Denmark, 25–27 July 2014, pp.V001T02A006–V001T02A015. New York: ASME.
18.
TesiAVinattieriFCapitaniRet al. Development of an e-LSD control strategy considering the evolution of the friction torque with the wear depth. SAE Int J Engines2016; 9: 1902–1909.
19.
PugiLAllottaBCiprianiMet al. Integrated design and simulation of a direct drive, electric shuttle vehicle. In: The dynamics of vehicles on roads and tracks–proceedings of the 24th symposium of the international association for vehicle system dynamics IAVSD’15 (ed RosenbergerMPlöchlMSixKet al.) Graz, Austria, 17–21 August 2015, pp.679–690. Boca Raton, FL: CRC Press.
20.
HancockMJWilliamsRAFinaEet al. Yaw motion control via active differentials. Trans Inst Meas Control2007; 29: 137–157.
21.
IvanovicVDeurJHeroldZet al. Modelling of electromechanically actuated active differential wet-clutch dynamics. Proc IMechE Part D: J Automobile Eng2012; 226: 433–456.
22.
ChoiMChoiSB.MPC for vehicle lateral stability via differential braking and active front steering considering practical aspects. Proc IMechE Part D: J Automobile Eng2016; 230: 459–469.
23.
MashadiBMostaaniSMajidiM.Vehicle stability enhancement by using an active differential. Proc IMechE Part D: J Automobile Eng2011; 225: 1098–1114.
24.
AnnicchiaricoCCapitaniR.Torque vectoring of a formula SAE through semi-active differential control. SAE paper 2014-32-0088, 2014.
25.
PugiLPagliaiMNocentiniAet al. Design of a hydraulic servo-actuation fed by a regenerative braking system. Appl Energy2017; 187: 96–115.
26.
PonomarevPManRHandroosHet al. High power density integrated electrohydraulic energy converter for heavy hybrid off-highway working vehicles. IET Electr Syst Trans2014; 4: 114–121.
27.
GassmannTBarlageJA.Electronic torque manager (ETM): an adaptive driveline torque management system. SAE paper 2004-01-0866, 2004.
28.
KrishnanR.Electric motor drives: modeling, analysis, and control. Upper Saddle River, NJ: Prentice Hall, 2001.
29.
TrujilloSCutkoskyM. Thermally constrained motor operation for a climbing robot. In: IEEE international conference on robotics and automation ICRA’09, Kobe, Japan, 12–17 May 2009, pp.2362–2367. Piscataway, NJ: IEEE.
30.
FunaioliEMaggioreAMeneghettiU.Lezioni di meccanica applicata alle machine – prima parte: fondamenti di meccanica delle machine, Vol. 1. Bologna, Italy: Patron, 2005.
31.
MerritHE.Hydraulic control systems. New York: Wiley, 1967.
PugiLContiRNoccioliniDet al. A tool for the simulation of turbo-machine auxiliary lubrication plants. Int J Fluid Power2014; 15: 87–100.
34.
PugiLAllottaB. Hardware-in-the-loop testing of on-board subsystems: some case studies and applications. In: Railway safety, reliability, and security: technologies and systems engineering. Hershey, PA: IGI Global, 2012, pp.249–280.
35.
YuGRHwangRC. Optimal PID speed control of brush less DC motors using LQR approach. In: 2004 IEEE international conference on systems, man and cybernetics, The Hague, Netherlands, 10–13 October 2004, pp.473–478. Piscataway, NJ: IEEE.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
