Optimal design of pre-triggering airbag system for occupant protection performance during frontal crashes

Abstract

With the rapid development of car crash sensing and identification technology, the application of pre-triggering airbag system is becoming an important option to improve vehicle safety. Thus, the present study aims to investigate the injury protection ability of pre-triggering airbag system and optimize its performance in frontal crashes regarding the key physical parameters. A driver restraint system model established and validated by National Crash Analysis Center was employed and validated for studying the injury protection ability of pre-triggering airbag system. Then, the influences of airbag triggering time, airbag volume scaling factor, inflator mass flow, and exhaust orifice size of pre-triggering airbag system on driver’s head and chest injuries were analyzed. Finally, the weighted injury criterion was selected as the evaluation index to optimize the pre-triggering airbag system. The results show the pre-triggering airbag should be designed with a larger airbag volume and inflator mass flow rate and smaller exhaust orifice. The optimized restraint system design presents a reduction of weighted injury criterion values in 100% and 40% overlapped frontal impacts reaching 25.63% and 42.23%, respectively.

Keywords

Airbag pre-triggering belt occupant injury frontal impact

Get full access to this article

View all access options for this article.

References

Bose

Crandall

Untaroiu

, et al. Influence of pre-collision occupant parameters on injury outcome in a frontal collision. Accid Analy Prev 2010; 42: 1398–1407.

Khalil

Wasko

Hallquist

, et al. Development of a 3-dimensional finite element model of air bag deployment and interactions with an occupant using DYNA3D. SAE Paper 912906, 1991.

Deng

YC.

How airbags and seat belts work together in frontal crashes. SAE Paper 952702, 1995.

Hou

Tomas

Sparke

Optimization of driver-side airbag and restraint system by occupant dynamics simulation. SAE Paper 952703, 1995.

JW.

Reliability-based robust assessment for multiobjective optimization design of improving occupant restraint system performance. Comp Ind 2014; 65: 1169–1180.

Mao

Appel

Influence of air bag folding pattern on OOP-injury potential. SAE Paper 2001-01-0164, 2001.

Shin

Yeo

WP.

The numerical study for the adaptive restraint system. SAE Paper 2007-01-1500, 2007.

Thomas

Hawthorn

LA.

Dual depth passenger airbag. SAE Paper 2005-01-1226, 2005.

Paulitz

Blackketter

Rink

. Fully-adaptive seatbelts for frontal collisions. In: Proceedings of the 19th international technical conference on the enhanced safety of vehicles, Washington, DC, 6–9 June 2005. National Highway Traffic Safety Administration.

10.

McCarthy

Chinn

Hill

. The effect of occupant characteristics on injury risk and the development of active-adaptive restraint systems. In: Proceedings of the 17th international technical conference on enhanced safety vehicles, Amsterdam, 4–7 June 2001. National Highway Traffic Safety Administration.

11.

Gonter

Zobel

Spies

. Potential of adaptive restraints in frontal collisions. In: Proceedings from Airbag 2004 Conference, 29 NKarlsruhe, Germany, November–1 December, 2004.

12.

Yang

Håland

. Modeling of adaptive passenger airbag system in car frontal crashes. In: 15th international technical conference on the enhanced safety vehicles, Melbourne, VIC, Australia, 13–16 May 1996. National Highway Traffic Safety Administration.

13.

Jörg

Kazuaki

Masanari

. Investigation into a restraint system device addressing different occupant seating positions and real world accident scenarios. In: Proceedings of the 20th international technical conference on the enhanced safety of vehicles, San Francisco, CA, 9–12 July 2007. National Highway Traffic Safety Administration.

14.

Yin

Zhang

Huang

SL.

Algorithm for airbag actuation based on artificial neural network. J Tsinghua Univ 1999; 39: 73–75.

15.

Böhmländer

Dirndorfer

Albayatti

, et al. Context-aware system for pre-triggering irreversible vehicle safety actuators. Accid Anal Prev 2017; 103: 72–84.

16.

Gstrein

Sinz

Eberle

, et al. Improvement of airbag performance through pre-triggering. In: Proceedings of the 21st international technical conference on the enhanced safety of vehicles, Stuttgart, 15–18 June 2009. National Highway Traffic Safety Administration.

17.

https://www.nhtsa.gov/crash-simulation-vehicle-models#madymo-occupant-vehicle-12111

18.

Samaha

Prasad

Nix

Development and validation of a Toyota Yaris MADYMO frontal occupant model. Working Paper 2013-W-004, 2013. Washington, DC: National Crash Analysis Center.

19.

Marzougui

Samaha

Cui

, et al. Extended validation of the finite element model for the 2010 Toyota Yaris passenger sedan. Working Paper 2012-W-005, 2012. Washington, DC: National Crash Analysis Center.

20.

Javorsky

Franchetti

Zhang

HY.

Determining the optimal parameters of bonding polyvinylchloride to stainless steel in automotive applications with the use of full factorial design of experiment. CIRP J Manufac Sci Tech 2014; 2: 151–158.

21.

Dette

Pepelyshev

Generalized Latin hypercube design for computer experiments. Technometrics 2010; 52: 421–429.

22.

Pajot

Optimal design exploration using global response surface method. Technical paper, Altair Engineering Inc, Troy, MI, 2013.

23.

Antona-Makoshi

Yamamoto

Kato

, et al. Effect of seatbelt and airbag loads on thoracic injury risk in frontal crashes considering average and small body sizes and age-dependent thoracic fragility. In: IRCOBI conference, Malaga, 14–16 September 2016. International Research Council on Biomechanics of Injury.

24.

Viano

Arepally

Assessing the safety performance of occupant restraint systems. SAE Paper 902328, 1990.