Optical design of light guide prisms with surface roughness for automotive tail lights

Abstract

This study presents the optical design of light guide prisms for automotive tail light applications to obtain the optimum luminous intensity and the illuminance uniformity. The design was achieved using optical design software, SPEOS. By considering the axial luminous intensity and legal requirements, the optimum prism angles of light guides were determined by simulations. After determining the prism angles, the effect of different surface roughness on the luminous intensity and the illuminance uniformity was investigated. The light guides designed by considering data from the simulation were manufactured as prototypes and their photometrical measurements were made. These measurements were compared to the simulation results. It was observed that simulation and prototype results are well in agreement with each other. Furthermore, it was found that as the surface roughness increases both the luminous intensity decreases and the illumination becomes more uniform.

Keywords

Light guides optical design luminous intensity illuminance uniformity surface roughness

Get full access to this article

View all access options for this article.

References

A compilation of motor vehicle crash data from the fatality analysis reporting system and the general estimates system. Washington, DC: US Department of Transportation, 2014.

Fratty

Signal lamp as a brand signature. Driving Vision News, 27 July 2009, pp.4–5.

Park

Kim

Park

, et al. Outlook for automotive lighting systems of autonomous vehicles. In: 9th CJK lighting conference, Busan, Korea, 18–19 August 2016.

Eichhorn

. LEDs in automotive lighting. In: Proceedings of SPIE 6134, light-emitting diodes: research, manufacturing, and applications X, 613405, San Jose, California, USA, 22 February 2006.

Long

Zhou

, et al. A review on light emitting diode based automotive headlamps. Renew Sust Energ Rev 2015; 41: 29–41.

Wang

Design of an optical lens combined with a total internal reflection (TIR) freeform surface for a LED front fog lamp. Opt Laser Technol 2017; 88: 11–16.

Chen

Kao

BD.

Optical design and optimization of planar curved LED end-lit light bar. Appl Optics 2014; 53: 67–75.

Chen

Liu

. Design of LED edge-lit light bar for automotive taillight applications. In: Proceedings of SPIE 8835, LED-based illumination systems, 88350G, San Diego, California, USA, 30 September 2013.

Gebauer

Hamm

. Light guide technology in head lamps and rear lamps-challenge for material and simulation tools. In: International symposium on automotive lighting, Darmstadt, 25–26 September 2007.

10.

Wördenweber

Wallaschek

Boyce

, et al. Automotive lighting and human vision. Berlin, Heidelberg and New York: Springer, 2007, pp.165–169.

11.

Gebauer

Wiersdorff

Lighting mechanism. Patent 7494257B2, USA, 2009.

12.

Decker

. Solid light guide optics for thin lamp applications. SAE technical paper 2001-01-0449, 2001.

13.

Peng

Chern

. Design of circular-shape no-loss bent lightpipe with a novel transform of elliptical form. In: Proceedings of SPIE 7059, nonimaging optics and efficient illumination systems V, 70590I, San Diego, California, USA, 2 September 2008.

14.

Gupta

Lee

Koshel

RJ.

Design of efficient lightpipes for illumination by an analytical approach. Appl Opt 2001; 40: 3640–3648.

15.

Koshel

. Optimization of parameterized lightpipes. In: International optical design conference, Vancouver, BC, Canada, 4–8 June 2006. DOI: 10.1364/IODC.2006.TuB1.

16.

https://dammedia.osram.info/media/resource/hires/osram-dam-5537480/LA%20B6SP_EN.pdf (2019, accessed 25 September 2019).

17.

https://www.unece.org/fileadmin/DAM/trans/main/wp29/wp29regs/2015/R128e.pdf (2019, accessed 12 November 2019).

18.

http://www.vdi3400.com/ (2019, accessed 12 November 2019).

19.

http://www.delta-mold.com/FTP/VDI%203400%20Surface%20Finish%20Grade%20Definition.pdf (2019, acces-sed 12 November 2019).