Mechanism of interior noise generation in high-speed vehicle based on anti-noise operational transfer path analysis

Owing to the continuous development of the automobile industry, increasingly stringent performance requirements for noise, vibration, and harshness of automobiles are being presented. Interior noise control in high-speed vehicles has not been adequately addressed, owing to the complex mechanism of noise generation. As simulations performed previously focused on vehicle wind noise and tyre noise cannot adequately predict the effect on passenger ear-side noise, these issues are investigated in this study. Their effects on passengers are investigated using transfer path analysis. An anti-noise operational transfer path analysis is proposed to study noise generated in high-speed vehicles. The established anti-noise operational transfer path analysis model can eliminate crosstalks between noise source signals of different transmission paths. The model is validated by comparing the measured and calculated values of the anti-noise operational transfer path analysis model. The coherence of the input noise signal and the ear-side noise signal of the passenger is assessed using coherence analysis. By calculating and categorising the contributions of different noise sources in different locations and types, the main noise sources affecting passenger comfort are determined. The result indicates that the main noise sources affecting the passenger’s ear-side noise change from engine noise to left-A wind noise and tyre radiation noise with increasing vehicle speed, in which the proportion also increase. The proposed anti-noise operational transfer path analysis is suitable for the interior-noise analysis of high-speed vehicles, and this study may serve as a reference for future studies regarding active and passive noise control in high-speed vehicles.