Investigation on friction-induced judder of vehicle driveline based on a nonlinear friction model

Due to friction characteristics of clutch, the driveline is prone to cause a judder during vehicle starting, and then to cause the vehicle body to vibrate, which affects driving quality. In order to analyze the judder phenomenon, a nonlinear numerical friction model based on the Gaussian friction model is established in this paper. For the driveline of a front-wheel-drive vehicle, a five-degree-of-freedom (5DOF) lumped parameter model including a nonlinear friction element is established. The complex mode of the driveline during the clutch in slip condition is calculated. The key parameters affecting the driveline stability are analyzed. The self-excited judder and pressure-induced judder of the driveline are numerically simulated, and the corresponding causes are analyzed. The nonlinear friction torque of the clutch is also calculated. Furthermore, the effects of the key parameters such as the torsional stiffness and damping of the clutch and drive shaft suppressing the self-excited judder and pressure-induced judder are numerically studied respectively. Compared with the widely used Karnopp friction model, the nonlinear numerical friction model established in this paper comprehensively includes the stribeck effect in slip and the friction torque characteristics in stick. The phenomena of the judder and stick-slip of the driveline during vehicle starting are more accurately simulated. The simulation results are in good agreement with the experimental results, which verify the accuracy and effectiveness of the dynamic model including the nonlinear friction element established in this paper.