Extending the role of computational fluid dynamics in screw machines

Abstract

Previous publications show that computational fluid dynamics (CFD) can be readily used for the flow prediction and analysis of screw compressors. Several case studies are presented in this article to show the scope and applicability of such methods. These include solid–fluid interaction in screw compressors, prediction of flow generated noise in screw machines, cavitation modelling in gear pumps, and flow in multiphase pumps for oil and gas industry. Numerical grids for all these cases were generated by the authors using an in-house grid generator, while the CFD calculations were performed with a variety of commercially available CFD codes.

In order to validate the accuracy of the CFD calculations, an extended test programme was carried out using laser Doppler velocimetry to measure the mean and fluctuating velocity distribution in screw compressor flow domains. The measurement results are then compared with the CFD simulations. The results confirm the viability of the developed techniques.

It is shown in this publication that the flexibility of the developed method creates further opportunities for a broader use of CFD for analysis of twin screw machines in a range of new applications.

Keywords

screw compressor computational fluid dynamics laser Doppler velocimetry numerical analysis

Get full access to this article

View all access options for this article.

References

Stošić

Smith

I. K.

Kovačević

Screw compressors mathematical modelling and performance calculation, 2005 (Springer, Berlin, Heidelberg (New York).

Ferziger

J. H.

Perić

Computational methods for fluid dynamics, 1996 (Springer, Berlin.

Demirdžić

Muzaferija

–Numerical method for coupled fluid flow, heat transfer and stress analysis using unstructured moving mesh with cells of arbitrary topology. Comput. Meth. Appl. Mech. Eng., 1995, 125. 235–255.

Perić

–Flow simulation using control volumes of arbitrary polyhedral shape. ERCOFTAC Bulletin, 2004, 62. 25–29.

Kovačević

–Boundary adaptation in grid generation for CFD analysis of screw compressors. Int. J. Numer. Methods Eng. (IJNME) , 2005, 63. 401–426.

Stosic

–On gearing of helical screw compressor rotors. Proc. IMechE, Part C: J. Mechanical Engineering Science, 1998, 213. 587–594.

Kovačević

Stošić

Smith

I. K.

–Three dimensional numerical analysis of screw compressor performance. J. Comput. Methods Sci. Eng., 2003, 3(2). 259–284.

Kovačević

Stošić

Smith

I. K.

–A numerical study of fluid-solid interaction in screw compressors. Int. J. Comput. Appl. Technol. (IJCAT) , 2004, 21(4), 148–158.

Kovačević

Stošić

Smith

I. K.

Screw compressors three dimensional computational fluid dynamics and solid fluid interaction, 2006 (Springer, Berlin, Heidelberg (New York).

10.

Kovačević

Stošić

Smith

I. K.

Mujic

–CFD Integrated design of screw compressors. Eng. Appl. Comput. Fluid Mech., 2007, 1(2), 96–108.

11.

Alagic

Stosic

Kovacevic

Buljubasic

–A numerical analysis of heat transfer and fluid flow in rotary regenerative air pre-heaters. J. Mech. Eng. (Strojniski Vestnik) , 2005, 51(7–8), 411–417.

12.

Vimmr

Ondrey

–Numerical simulation of leakage flow between moving rotor and housing of screw compressor. Proc. Conf. Modelowanyie Inzynierskie, 2006, 32. 461–468.

13.

Kauder, K., de Araújo-Rudolph, L., and Sachs, R. Experimental and numerical investigation of the gas flow using a plane model of male rotor-housing gap in a screw-type machine. Schraubenmaschinen 8, Dortmund 2000.

14.

Durst, F. Fluid mechanism development and advancements in the 20th century. In 10th International Symposium on Applications of laser techniques to fluid mechanics, Lisbona, 10–13 July 2000.

15.

Albrecht, H. -E., Borys, M., Damaschke, N., and Tropea, C. (Eds) Laser Doppler and phase Doppler measurement techniques, 2003 (Springer, New York).

16.

Drain, L. E. (Ed.) The laser Doppler technique, 1986 (John Wiley, New York).

17.

Nouri, J. M., Guerrato, D., Stošić, N., and Kovačević, A. Cycle resolved velocity measurements within a screw compressor. In 18th International Compressor Engineering Conference at Purdue, Lafayette, Indiana, 17–20 July 2006.

18.

Guerrato, D., Nouri, J. M., Stosic, N., Arcoumanis, C., and Smith, I. K. Flow development in the discharge chamber of a screw compressor. In International conference on compressors and their systems, City University, London, 10–12 September 2007 (IMEchE).

19.

Mujic

Kovacevic

Stosic

Smith

I. K.

–The influence of port shape on gas pulsations in a screw compressor discharge chamber. Proc. IMechE, Part E: J. Process Mechanical Engineering, 2008, 222(E4), 211–223.

20.

Kovačević, A., Mujic, E., Stošić, N., and Smith, I. K. An integrated model for the performance calculation of screw machines. In Proceedings of International Conference on Compressors and their Systems, City University, London, 10–12 September 2007 (IMechE).

21.

Mujic, E. A numerical and experimental investigation of pulsation induced noise in screw compressors. PhD Thesis, City University, London, 2009.

22.

Steinman, A. Numerical simulation of fluid flow in screw machines with moving mesh techniques in ANSYS CFX, Schraubenmaschinentagung 2006, Dortmund VDI Berichte.