Monitoring sand particle concentration in two-phase flow using acoustic emission

Abstract

This technical note presents an experimental investigation using acoustic emission technology to monitor sand transportation in two-phase flow. The investigation consisted of a preliminary experiment where a single sand particle was dropped onto metal plates to provide a basis for monitoring particle impingement on metal pipes in two-phase or three-phase flow systems. Further investigations were undertaken on two-phase (air–sand) flow in a horizontal pipe where the superficial gas velocity (VSG) was varied. The objective of this research programme was to explore the possibility of employing acoustic emission as a non-invasive technology for monitoring sand particle concentration levels in multi-phase flow conditions. The experimental findings clearly show that a correlation exists between acoustic emission energy levels, sand concentration and superficial gas velocity.

Keywords

Acoustic emission air–sand flow multi-phase flow sand monitoring condition monitoring

Get full access to this article

View all access options for this article.

References

Shirazi SA, McLaury BS and Ali MM. Sand monitor evaluation in multiphase flow. Paper presented at Corrosion 2000, paper No. 00084.

Holroyd

. The acoustic emission & ultrasonic monitoring handbook, Oxford, UK: Coxmoor, 2000.

Miller RK and Mclntire P. Non-destructive testing handbook, Vol. 5. 2 ed. Acoustic emission testing. Columbus, Ohio: American Society for Non-destructive Testing, 1987.

Al-Lababidi S, Addali A, Yeung H, et al. Gas void fraction measurement in two-phase gas/liquid slug flow using acoustic emission technology. ASME 2009; 131(6): 064501, 693-702.

Sikorska

Mba

. Truth, lies acoustic emission and process machines. IMechE Part E 2008; 222(1): 1–19.

Buttle

Scruby

. Characterization of particle impact by quantitative acoustic emission. Wear 1990; 137(1): 63–90.

Tsujimoto

Yokoyama

Huang

. Monitoring particle fluidization in a fluidized bed granulator with an acoustic emission sensor. Powder Technol 2000; 113: 88–96.

Jingdai

Congjing

Yongrong

. Characterisation of flow regime transition and particle motion using acoustic emission measurement in a gas-solid fluidized bed. AIchE J 2010; 56(5): 1173–1183.

Hedges B and Bodington A. A comparison of monitoring techniques for improved erosion control: A field study. NACE 04355. Corrosion 2004, March 28–Aprill 1, 2004, New Orleans, LA.

10.

Clampon DSP-06 particle monitor. Available at: http//www.ClamON.com/ (accessed March 2013).

11.

Al-lababidi

Addali

Yeung

. Acoustic emission and gas phase measurements in two-phase flow. Proc IMechE Part E 2010; 224(E4): 281–290.

12.

Physical Acoustic Corporation. PCI-2 based AE system user manual. April 2007.

13.

Alforgani MA. Condition monitoring of slow speed rotating machinery using acoustic emission technology. Theses, Cranfield University, 2010.

14.

Johnson

. Analyze hazards, not just risks. Chem Eng Progr 2000; 96(7): 31–40.

15.

Schetaz

Fuhs

. Fundamentals of fluid mechanics, New York, NY: Wiley, 1999.