Research on the performance of electro-hydraulic proportional flow valve controlled by active pilot pump

Abstract

The cartridge flow valves, used in heavy machine and equipment, have the advantages of low leakage, large flow capacity, simple structure, and ease of modulation. However, in order to reduce the influence of load variety on the flow through valve, a pressure differential compensator or a cartridge type flow sensor should be added to the proportional throttle valve. These methods have disadvantages of reducing the flow capacity of valve and increasing the throttling loss. To overcome these disadvantages, a low energy consumption, high controllable electro-hydraulic proportional flow valve which consists of a hydraulic transistor (Valvistor) and a small displacement hydraulic pump driven by a servo motor is proposed firstly in the world. As the pump flow is basically proportional to the pump speed and little influenced by load variety, the flow through main valve is proportional to pilot pump speed. In the research, it’s known that feedback throttle slot pre-opening will cause the decrease of the main valve flow as pressure drop increases. So, small orifices are used instead of the pre-opening of feedback throttle slot to reduce the influence of load variety on the flow through valve. Furthermore, a method of pressure differential changing with pilot pump rotational speed calibration is introduced to further mitigate the influence of pressure difference. In this paper, the mathematical dynamic model of the valve is also established and the stability criterion of valve is derived. The influence of valve parameters and the flow pulsation of pilot pump on valve flow performance is analyzed and simulated. In view of the pilot pump flow pulsation frequency being much higher than the valve natural frequency, the research shows that the influence of flow pulsation of pilot pump on valve flow performance is very little. The research work provides a new method for the large flow electro-hydraulic proportional control system.

Keywords

Valvistor proportional flow control valve pressure differential-rotational speed compensation steady-state characteristics pilot pump

Get full access to this article

View all access options for this article.

References

Opdenbosch P, Sadegh N and Book WJ. Modeling and control of an electro-hydraulic poppet valve. In: ASME 2004 international mechanical engineering congress and exposition, American Society of Mechanical Engineers, IMECE2004-59751, California, USA, November 2004, pp. 103–110.

Opdenbosch

Sadegh

Book

. Modelling an electro-hydraulic poppet valve. Int J Fluid Power 2009; 10: 7–15.

Muller

Fales

. Design and analysis of a two-stage poppet valve for flow control. Int J Fluid Power 2008; 9: 17–26.

Andersson BR. On the Valvistor: A proportionally controlled seat valve. Dissertation, Linkoeping University, Linkoeping, Sweden, 1984.

Andersson BR, Andrew D and Martin A. Vickers new technologies applied to electronic hydraulic controls. In: SAE international off-high way and power plant congress and exposition, Indiana, USA, 1996, pp. 71–76.

Pettersson H and Palmberg JO. High bandwidth flow amplifier a design and concept study. The 6th Scandinavian international conference on fluid power, Tampere, Finland, May 1999, pp. 321–337.

Pettersson H. On valve controlled fluid power systems flow amplifier and percussive rock drilling. Dissertation, Linkoeping University, Linkoeping, Sweden, 2002.

Prasetiawan EA, Zhang R and Alleyne AG. Fundamental performance limitations for a class of electronic two-stage proportional flow valves. In: American control conference on fluid power control system, Arlington, USA, June 2001, pp. 3955–3960.

Zhang

Alleyne

Prasetiawan

. Performance limitations of a class of two-stage electro-hydraulic flow valves. Int J Fluid Power 2002; 3: 47–53.

10.

Fales

. Stability and performance analysis of a metering poppet valve. Int J Fluid Power 2006; 7: 11–17.

11.

Eriksson B, Andersson BR and Palmberg JO. The dynamic properties of a poppet type hydraulic flow amplifier. In: 10th Scandinavian international conference on fluid power, Tampere, Finland, May 2007, pp. 161–178.

12.

Eriksson B, Andersson BR and Palmberg JO. The dynamic performance of a pilot stage in the poppet type hydraulic flow amplifier. In: Proceedings of the 51st NCFP technical conference. Madison, WI: Omnipress, March 2008, pp. 659–668.

13.

Quan

Yan

. A new kind of pilot controlled proportional direction valve with internal flow feedback. Chin J Mech Eng 2010; 23: 60–65.

14.

Wang

Zhao

Quan

. Research on the dynamic and static characteristics of electro-hydraulic proportional direction valve with flow feedback. Chin J Mech Eng 2014; 50: 205–212.

15.

Quan L, Feng K and Zhao H. A two-way continuous flow control valve. CN. Patent No. 101846109A, 19 September 2010.

16.

Lu YX. Entwicklung vorgesteuerter proportional ventile mit 2-Wege-Einbauventil als stellglied und mit geraeteinterner rueckfuehrung. Dissertation, RWTH Aachen, Germany, 1981.

17.

Huang

Qiu

. A new electro-hydraulic proportional flow valve based on the flow-displacement-force feedback principle. Chin Hydraul Pneumat 1983; 1: 1–7.

18.

Yuan Q H, Schottler C and Lew J Y. Electronic flow control valve (EFCV) with pressure compensation capability. In: The Fifth international fluid power conference, Aachen, Germany, March 2004, pp. 1–10.

19.

Eriksson B. Control strategy for energy efficient fluid power actuators: Utilizing individual metering. Dissertation, Linkoeping University, Linkoeping, Sweden, 2007.

20.

Kitagawa

Takenaka

. A study on the poppet valve with series restriction chokes. Trans Jpn Soc Mech Eng 1987; 53: 1750–1755.

21.

Zhang Y. Study on the characteristics of electro-hydraulic proportional flow valve based on the flow feedback. Dissertation, Taiyuan University of Technology, China, 2015.

22.

Zhou

Peng

Zeng

. Research on the influence factors of leakage in annular clearance seals. Lubric Eng 2005; 1: 7–9.