Flow characteristics prediction in pump mode of a pump turbine using large eddy simulation

Abstract

To obtain more accurate flow characteristics of pump turbines, the method of large eddy simulation with wall-adapting local eddy viscosity model is applied in simulating several operating points in the pump mode. Firstly, based on the experimental validation, the method of large eddy simulation could better predict the external performance and internal flow characteristics in a pump turbine in the pump mode compared with the method of Reynolds-averaged Navier–Stokes with two-equation turbulence model shear stress transport k–ω. Then, flow characteristics under 1.00Q_BEP (best efficiency point), 0.91Q_BEP, 0.88Q_BEP, and 0.85Q_BEP operating points are investigated to find out the causes of the head drop in the energy-discharge curve through large eddy simulation. The detailed analysis reveals that the head drop at the point 0.85Q_BEP is related to the recirculation flow at the runner inlet. Finally, unsteady studies confirm that vortex movement at the runner inlet lead to the variation of the amplitudes and directions of the velocity, which generates the rotation of the separation vortices in the runner and stay vane channels.

Keywords

Pump turbine pump mode large eddy simualtion flow characteristics Reynolds-averaged Navier–Stokes

Get full access to this article

View all access options for this article.

References

Yin

Liu

Wang

et al.

Performance prediction and flow analysis in the vaned distributor of a pump turbine under low flow rate in pump mode. Sci China Technol Sci 2010; 53: 3302–3309.

Wang

Yin

Jiao

et al.

Numerical investigation in the “S” characteristics of a reduced pump turbine model. Sci China Technol Sci 2011; 54: 1259–1266.

Gong

Wang

et al.

Dynamic analysis on pressure fluctuation in vaneless region of a pump turbine. Sci China Technol Sci 2015; 58: 813–824.

ANSYS 15.0: ANSYS Documentation//CFX//Theory Guide//Turbulence and wall Function Theory//2.5 Large Eddy Simulation Theory. help/cfx_mod/i1303019.html.

Byskov

Jacobsen

Pedersen

. Flow in a centrifugal pump impeller at design and off-design conditions—Part II: Large eddy simulations. J Fluids Eng 2003, pp. 125–125.

et al.

Assessment of LES performance in simulating complex 3D flows in turbo-machines. Eng Appl Comput Fluid Mech 2012; 6: 356–365.

Guleren

Afgan

Turan

. Predictions of turbulent flow for the impeller of a NASA low-speed centrifugal compressor. J Turbomach Trans ASME 2010; 132(0210052): 1–8.

Pacot

Kato

Avellan

. High-resolution LES of the rotating stall in a reduced scale model pump-turbine. IOP Conf Ser: Earth Environ Sci 2014; 22(022018): 1–8.

Li DY, Wang HJ, Xiang GM, et al. Unsteady simulation and analysis for hump characteristics of a pump turbine model. Renew Energy 2015; 77: 32–42.

10.

Liu

et al.

Numerical investigation of the hump characteristic of a pump–turbine based on an improved cavitation model. Comput Fluids 2012; 68: 105–111.

11.

Yang

Pravesi

Yuan

et al.

Experimental characterization of a pump–turbine in pump mode at hump instability region. J Fluids Eng 2015; 137: 1–11.

12.

Menter

. Two equation eddy viscosity turbulence models for engineering applications. AIAA J 1994; 32: 1598–1605.

13.

Nicoud

Ducros

. Subgrid-scale stress modelling based on the square of the velocity gradient tensor. Flow Turbul Combust 1999; 62: 183–200.

14.

Delafosse

Line

Morchain

et al.

LES and URANS simulations of hydrodynamics in mixing tank: Comparison to PIV experiments. Chem Eng Res Des 2008; 86: 1322–1330.

15.

Ma J, Wang F and Tang X. Comparison of several subgrid-scale models for large-eddy simulation of turbulent flows in water turbine. In: 4th international symposium on fluid machinery and fluid engineering, Beijing, China, 24–27 November 2008.

16.

ANSYS.14.0: Documentation for ANSYS ICEM CFD 14.0: Help Manual//Edit Mesh//Display Mesh Quality. 2014.

17.

ANSYS.14.0: Documentation//Fluent//Theory Guide//4.Turbulence//4.12.Large Eddy Simulation (LES) Model//4.12.3.Inlet Boundary Conditions for the LES Model. 2014.

18.

Gong

Wang

et al.

Numerical investigation in the vaned distributor under different guide vanes openings of a pump turbine in pump mode. J Appl Fluid Mech 2016; 9: 253–266.

19.

Gong

Wang

et al.

Numerical investigation on transient flow of a high head low specific speed pump-turbine in pump mode. J Renew Sustain Energy 2015; 7: 63111–63111.

20.

International Electrotechnical Commission (IEC) 60193. Hydraulic turbines, storage pumps and pump-turbines—Model acceptance tests. 1999, p. 53.

21.

Xia

Cheng

Zhang

et al.

Numerical analysis of rotating stall instabilities of a pump-turbine in pump mode. In: 27th IAHR symposium on hydraulic machinery and systems (IAHR 2014) Montreal, Canada, 22–26 September 2014, pp. 1–7.