Two-step validation process of particle mixing in a centrifugal mixer with vertical axis

Abstract

Two-step approach of validation is proposed to validate a numerical model, capable of accurate prediction of mixing power characteristics of a centrifugal mixer with vertical axis. Two sets of experiments and two sets of numerical simulations are presented—the first set to determine physical characteristics of the particles comparing the numerical simulations results with experimental data, and the second set to validate predicted behavior of anchor type vertical axis impeller for mixing of same particles. Zeolite particles were used for actual calculations. After determining shear modulus, coefficient of interaction, static friction coefficient, and rolling friction coefficient through optimization process based on numerical simulations with subject function of diameter and angle of repose derived from experiment, using these values in numerical simulation of impeller mixer mixing zeolite particles led to results, which were in good agreement with results of the second set of experiments. The obtained zeolite material parameter values can therefore serve as a solid basis for discrete elements method based numerical simulation of zeolite granular materials.

Keywords

Discrete elements method centrifugal mixer solid–solid interaction validation of numerical modeling zeolite mixing

Get full access to this article

View all access options for this article.

References

Sarkar

Wassgren

. Continuous blending of cohesive granular material. Chem Eng Sci 2010; 65: 5687–5698.

Huang

A-N

Kuo

H-P

. Developments in the tools for the investigation of mixing in particulate systems – A review. Adv Powder Technol 2014; 25: 163–173.

Zhou

Kuang

Chu

et al.

Discrete particle simulation of particle–fluid flow: model formulations and their applicability. J Fluid Mech 2010; 661: 482–510.

Neuwirth

Antonyuk

Heinrich

et al.

CFD–DEM study and direct measurement of the granular flow in a rotor granulator. Chem Eng Sci 2013; 86: 151–163.

Bertrand

Leclaire

L-A

Levecque

. DEM-based models for the mixing of granular materials. Chem Eng Sci 2005; 60: 2517–2531.

Cundall

Strack

ODL

. A discrete numerical model for granular assemblies. Géotechnique 1979; 29: 47–65.

Jajcevic

Siegmann

Radeke

et al.

Large-scale CFD–DEM simulations of fluidized granular systems. Chem Eng Sci 2013; 98: 298–310.

Johnson

. Contact Mechanics. J Am Chem Soc 1985; 37: 1–17.

Landau

Lifshits

Kosevich

et al.

Theory of elasticity, London: Butterworth-Heinemann, 1986.

10.

Kegl M, Vesenjak M, Harl B, et al. Mehanika za mehatronike: University textbook. Book, University of Maribor, Faculty of Mechanical Engineering. https://books.google.si/books?id=lLtFMwEACAAJ (2011).

11.

Makse

Gland

Johnson

et al.

Granular packings: Nonlinear elasticity, sound propagation, and collective relaxation dynamics. Phys Rev E 2004; 70: 61302–61302.

12.

Khan H and Tod Pittam J. Discrete element modelling of lateral earth pressure. 1. Epub ahead of print 2015. DOI: 10.1017/CBO9781107415324.004.

13.

EDEM Contact models - DEM solutions training.

14.

Chukwu

Akande

. Development of an apparatus for measuring angle of repose of granular materials. AU J Technol 2007; 11: 62–66.

15.

Salah

. A theoretical study of zeolite ABW: Its mechanical and auxetic properties. Iran J Mater Sci Eng 2012; 9: 30–35.

16.

Sanchez-Valle

Lethbridge

ZAD

Sinogeikin

et al.

Negative Poisson’s ratios in siliceous zeolite MFI-silicalite. J Chem Phys 2008; 128: 184503–184503.