Efficiency improvement of regenerative pump using blade profile modification: Experimental study

Abstract

Regenerative flow pump is a kind of turbomachine with the ability to generate high heads at relatively low flow rates. Despite having low hydraulic efficiency, regenerative pumps have found many applications in industries due to their simplicity, compact size, low manufacturing costs, and low specific speed. In this paper, an experimental study has been carried out to investigate the influence of impeller blade change on the performance of regenerative pump. To this end, the straight radial blades were changed to curved blades with the same inlet/outlet angles. Three forward curved blade impellers as well as straight radial blade impeller were designed and manufactured. Since the regenerative pump comply with the affinity laws, the results of experimental tests were expressed in nondimensional coefficients. The results showed that by increasing the blade angle to 10°, the efficiency increased and at higher blade angles of 30° and 50°, the efficiency decreased for all flow conditions. The best angle was obtained about 15° by curve fitting to the experimental data at the design flow coefficient.

Keywords

Regenerative pump curved blades impeller blade angle best angle

Get full access to this article

View all access options for this article.

References

Raheel

Engeda

. Systematic design approach for radial blade regenerative turbomachines. Propul Power 2005; 21: 884–892.

Yoo

Park

Chung

. Improved momentum exchange theory for incompressible regenerative turbomachines. Proc IMechE, Part A: J Power and Energy 2005; 219: 567–581.

Raheel M and Engeda A. Current status, design and performance trends for the regenerative flow compressors and pumps. In: IMECE 2002 -39594, New Orleans, Louisiana, November 2002.

Teshome Y and Dribsa E. CFD study of the performance of regenerative flow pump (RFP) with aerodynamic blade geometry. MS Thesis, University of Addis Ababa, Ethiopia, 2007.

Lei

Baoshan

Shuliang

et al.

Influence of blade wrap angle on centrifugal pump performance by numerical and experimental study. Chinese J Mech Eng 2014; 27: 171–177.

Tan

Cao

Wang

et al.

Direct and inverse iterative design method for centrifugal pump impellers. Proc IMechE, Part A: J Power and Energy 2012; 226: 764–775.

Song

Engeda

Chung

. A modified theory for the flow mechanism in a regenerative flow pump. Proc IMechE, Part A: J Power and Energy 2003; 217: 311–321.

Yoo

Park

Chung

. Hydraulic design of a regenerative flow pump for an artificial heart pump. Proc IMechE, Part A: J Power and Energy 2006; 220: 699–706.

Yoo

Park

Chung

. Improved momentum exchange theory for incompressible regenerative turbomachines. Proc IMechE, Part A: J Power and Energy 2005; 219: 567–581.

10.

Quail

Scanlon

Baumgartner

. Design study of a regenerative pump using one-dimensional and three-dimensional numerical techniques. Eur J Mech B/Fluids 2012; 31: 181–187.

11.

Fleder

Böhle

. A systematical study of the influence of blade length, blade width, and side channel height on the performance of a side channel pump. ASME J Fluids Eng 2015; 137: 121102–121102.

12.

Karlsen-Davies

Aggidis

. Regenerative liquid ring pumps review and advances on design and performance. Appl Energy 2016; 164: 815–825.

13.

Sixsmith

Altmann

. A regenerative compressor. Trans ASME 1977; 99: 637–647.

14.

Shirinov

Oberbeck

. High vacuum side channel pump working against atmosphere. Vacuum 2011; 85: 1174–1177.

15.

Badami M. Theoretical and experimental analysis of traditional and new periphery pumps. SAE Technical paper Series, No. 971074, 1997, pp. 45–55.

16.

Choi CW, Yoo SI, Park RM, et al. Experimental study on the effect of blade angle on regenerative pump performance. Proc IMechE Part A: Journal of Power and Energy 2013; 227: 585–592.

17.

Maity

Chandrashekharan

Afzal

. Experimental and numerical investigation of regenerative centrifugal pump using CFD for performance enhancement. Int J Curr Eng Technol 2015; 5: 2898–2903.

18.

Nejadrajabali

Riasi

Nourbakhsh

. Flow pattern analysis and performance improvement of regenerative flow pump using blade geometry modification. Int J Rotat Mach vol. 2016, Article ID 8628467, 16 pages, 2016. doi:10.1155/2016/8628467.

19.

Nejad

Riasi

Nourbakhsh

. Parametric study and performance improvement of regenerative flow pump considering the modification in blade and casing geometry. Int J Numer Methods Heat Fluid Flow 2017; 27: 1887–1906.