Energy and exergy analysis on hydrofluoroolefin/ hydrofluorocarbon (HFO/HFC) refrigerant mixtures in low and medium temperature small-scale refrigeration systems
Restricted accessResearch articleFirst published online 2019
Energy and exergy analysis on hydrofluoroolefin/ hydrofluorocarbon (HFO/HFC) refrigerant mixtures in low and medium temperature small-scale refrigeration systems
The new refrigerants such as HFO-1234yf and HFO-1234ze have been considered as long-term replacements for HFC-134a to comply with the Kyoto protocol. In small size refrigeration systems, these refrigerants have poor performance than HFC-134a besides their minor flammability. Previous studies reveal that the addition of HFC-134a in small quantity can improve the performance of a system without exceeding the global warming potential limit (150) prescribed by the European Union. However, this concept is not studied in small-scale refrigerators. Therefore, the performance of low and medium temperature systems of capacity 190 and 285 litre, respectively, working with different hydrofluoroolefin/ hydrofluorocarbon (HFO/HFC) mixtures, has been studied by mathematical simulation. The software tool ‘MATLab’ and the refrigerant property database ‘REFPROP’ have been used in the simulation. The results showed that the coefficient of performance (COP) of Hydrofluoroolefin (HFO) refrigerants and its mixtures decreases from 2.4 to 15.7% than that of HFC-134a. Among the mixtures, HFO-1234ze/HFC-134a (90/10) shows better performance and its predicted coefficient of performance (COP) and exergetic efficiency are 4–8.3% and 5.1–10.5%, respectively, higher than that of other mixtures considered in this study.
Consultation Document, Proposed Amendments to the Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations, Chemical Production Division Canada, 2014.
2.
ASHRAE. Heating and cooling, ASHRAE Handbook-HVAC Systems and Equipment, SI ed. American Society of Heating Refrigerating and Air-Conditioning Engineers (ASHRAE) Atlanta, GA, US, 2008.
3.
MohanrajMJayarajSMuraleedharanC. Comparative assessment of environment-friendly alternatives to HFC-134a in domestic refrigerators. Energy Efficiency2008; 1: 189–198.
4.
GraziosiFArduiniJFurlaniF, et al.European emissions of the powerful greenhouse gases hydrofluorocarbons inferred from atmospheric measurements and their comparison with annual national reports to UNFCCC. Atmos Environ2017; 158: 85–97.
5.
NielsenOJJavadiMSSulbakA, et al.Atmospheric chemistry of CF3CF=CH2; kinetics and mechanisms of gas-phase reactions with Cl atoms, OH radicals, and O3. Chem Phys Lett2007; 439: 18–22.
6.
KazilJMcKeenSKimSW, et al.Deposition and rainwater concentrations of trifluoroacetic acid in the United States from the use of HFO-1234yf. J Geophys Res Atmos2014; 119: 59–79.
7.
RussellMHHoogewegGWebsterEM, et al.TFA from HFO-1234yf: accumulation and aquatic risk in terminal water bodies. Environ Toxicol Chem2012; 31: 1957–1965.
8.
European Fluoro Carbons Technical Committee, European Chemical Industry Council. CEFIC Sector Group, Belgium 2016.
9.
Karber KM, Abdelaziz O and Vineyard EA. Experimental performance of R-1234yf as a drop-in replacement for R-134a in domestic refrigerators. In: International refrigeration and air-conditioning conference, Purdue, 2012, paper no. 1228.
10.
Leck TJ. New high performance, low GWP refrigerants for stationary AC and refrigeration. In: International refrigeration and air conditioning conference, Purdue, 2010, paper no. 1032.
11.
Navarro- EsbriJMendoza-MirandaJMMota-BabiloniA, et al.Experimental analysis of HFO-1234yf as a drop-in replacement for HFC-134a in a vapor compression system. Int J Refrig2013; 36: 870–880.
12.
BellIHDomanskiPAMcLindenMO, et al.The hunt for nonflammable refrigerant blends to replace R-134a. Int J Refrig2019; 104: 484–495.
13.
LeeYKangDJungD. Performance of virtually non-flammable azeotropic HFO1234yf/HFC134a mixture for HFC134a applications. Int J Refrig2013; 36: 1203–1207.
14.
Mota-BabiloniANavarro-EsbriJBarraganA, et al.Drop-in energy performance evaluation of HFO-1234yf and HFO-1234ze(E) in a vapor compression system as HFC-134a replacements. Appl Therm Eng2014; 71: 259–265.
15.
ApreaCGrecoAMaiorinoA. An experimental investigation on the substitution of HFC134a with HFO1234yf in a domestic refrigerator. Appl Therm Eng2016; 106: 959–967.
16.
ChoHParkC. Experimental investigation of performance and exergy analysis of automotive air conditioning systems using refrigerant R1234yf at various compressor speeds. Appl Therm Eng2016; 101: 30–37.
17.
KabeelAEKhalilABassuoniMM, et al.Comparative experimental study of low GWP alternative for R134a in a walk-in cold room. Int J Refrig2016; 69: 303–312.
18.
GauravRK. Computational energy and exergy analysis of R134a, R1234yf, R1234ze and their mixtures in vapour compression system. Ain Shams Eng J2018; 9: 3229–3237.
19.
Lemmon EW, Huber ML and McLinden MO. Reference fluid thermodynamic and transport properties (REFPROP). Version 9.1. NIST Standard Reference Database 23. Gaithersburg, MD: National Institute of Standards and Technology, 2007.
20.
Qiu J, Zhang H, Wang Z, et al. Theoretical analysis of low GWP mixture R600a/R1234ze as a possible alternative to R600a in domestic refrigerators. In: The 15th international refrigeration and air conditioning conference, Purdue, 2014, paper no. 2515.
21.
Joseph SekharSSaravanaramTMohan LalD, et al.Simulation of an energy efficient HFC134a/HC600a/HC290 refrigerant mixture performance in domestic refrigerator. Int J Heat Technol2003; 21: 65–71.
22.
SekharSJLalDM. HFC134a/HC600a/HC290 mixture a retrofit for CFC12 systems. Int J Refrig2005; 28: 735–743.
23.
Meyer WA and Thompson HD. An analytical model of heat transfer to the suction gas in a low-side hermetic refrigeration compressor. In: International compressor conference, Purdue University, 1988, pp.908–916.
24.
Padhy SK. Heat transfer model of a rotary compressor. In: Proceedings of the international compressor engineering conference, 1992, pp.405–417. West Lafayette, IN: Purdue University.
25.
PerryRHChiltonCH. Perry's chemical engineering hand book, 6th ed. New York: McGraw Hill Professional, 1984.
26.
JudgeJRadermacherR. A heat exchanger model for mixtures and pure refrigerant cycle simulations. Int J Refrig1997; 20: 244–255.
27.
TravissDPRohsenhowWBaronA. Forced convective condensation in tubes: a heat transfer correlation for condenser design. ASME Trans1973; 79: 157–165.
28.
CooperMG. Heat flow rated in saturated nucleate pool boiling-wide ranging examination using reduced properties. Adv Heat Transfer1984; 16: 157–239.
29.
WatteletJPChatoJCSouzaAL, et al.Evaporative characteristics of R12, HFC-134a and mixture at a low mass fluxes. ASHRAE Trans1994; 1994: 603–615. .
30.
Collier JG and Thome JR. Convective boiling and condensation. 3rd ed. Oxford Science Publications, 1994. Clarendon Press.
31.
Saji RaveendranPJoseph SekharS. Exergy analysis on domestic refrigeration system with brazed plate heat exchanger as condenser. J Therm Anal Calorim2017; 127: 2439–2446.
32.
Saji RaveendranPJoseph SekharS. Performance studies on a domestic refrigerators retrofitted with building-integrated water-cooled condenser. Energy Build2017; 134: 1–10.
33.
YangMZhangHMengZ, et al.Experimental study on R1234yf/R134a mixture (R513A) as R134a replacement in a domestic refrigerator. Appl Therm Eng2019; 146: 540–547.
34.
Siva ReddyVPanwarNLKaushikSC. Exergetic analysis of a vapour compression refrigeration system with HFC-134a, R143a, R152a, R404A, R407C, R410A, R502 and R507A. Clean Technol Environ Policy2012; 14: 47–53.
35.
Saji RaveendranPJoseph SekharS. Investigation on the energy and exergy efficiencies of a domestic refrigerator retrofitted with water-cooled condensers of shell-and-coil and brazed-plate heat exchangers. J Therm Anal Calorim2019; 1: 381–388.
