Analysis of wear debris, vibration and temperature of journal bearing has been integrated to increase the accuracy in fault diagnosis of a hydropower plant. Samples of used lubricating oil, vibration data and bearing temperature at different intervals were collected. Wear particles and acceleration caused by vibration were analysed for the fault detections. An abnormal increase in the temperature and vibrational energy was observed after 200 days of continuous operations. In the last sample, an abnormal increase in aspect ratio of the wear particles was also observed. Scratches and wiping mark were found over the surface of bearing block and side thrust pad. This confirmed the fault of machine by the analysis of condition monitoring data. Further rectification was done by the replacement of bearing block.
KumarMMukherjeePSMisraNM. Advancement and current status of wear debris analysis for machine condition monitoring: a review. Ind Lubr Tribol2013; 65: 3–11.
SperringTPNowellTJ. SYCLOPS- a qualitative debris classification system developed for RAF early failure detection centres. Tribol Int2005; 38: 898–903.
4.
AhnHSYoonDGKwonOK, et al.Practical contaminant analysis of lubricating oil in a steam turbine-generator. Tribol Int1996; 29: 161–168.
5.
WuHLiRKwokNM, et al.Restoration of low-informative image for robust debris shape measurement in on-line wear debris monitoring. Mech Syst Sig Process2019; 114: 539–555.
6.
YuanCQPengZZhouXC, et al.The characterization of wear transitions in sliding wear process contaminated with silica and iron powder. Tribol Int2005; 38: 129–143.
7.
RaadnuiS. Wear particle analysis – utilization of quantitative computer image analysis: a review. Tribol Int2005; 38: 871–878.
8.
HongWCaiWWangS, et al.Mechanical wear debris feature, detection, and diagnosis: a review. Chinese J Aeronaut2018; 31: 867–882.
9.
PrabhakaranAJaggaCR. Condition monitoring of steam turbine-generator through contamination analysis of used lubricating oil. Tribol Int1999; 32: 145–152.
10.
PoddarSTondanN. Detection of particle contamination in journal bearing using acoustic emission and vibration monitoring techniques. Tribol Int2019; 134: 154–164.
11.
PengZKessissoglouNJ. An integrated approach to fault diagnosis of machinery using wear debris and vibration analysis. Wear2003; 255: 1221–1232.
12.
LiuJShiZShaoY. A theoretical study for the influence of the combined defect on radial vibrations of a ball bearing. Ind Lubr Tribol2018; 70: 339–346.
13.
XiSCaoHChenX. Dynamic modeling of spindle bearing system and vibration response investigation. Mech Syst Sig Process2019; 114: 486–511.
14.
GoncalvesACCunhaRCLagoDF. Applications and case studies maintenance of a reducer by vibration and wear particles analysis. J Qual Maint Eng2006; 12: 118–132.
15.
KumarPHiraniHAgrawalAK. Online condition monitoring of misaligned meshing gears using wear debris and oil quality sensors. Ind Lubr Tribol2018; 70: 645–655.
16.
EbersbachSPengZKessissoglouNJ. The investigation of the condition and faults of a spur gearbox using vibration and wear debris analysis techniques. Wear2004; 260: 16–24.
17.
ZhangSXuHZhangL, et al.Vibration suppression mechanism research of adjustable elliptical journal bearing under synchronous unbalanced load. Tribol Int2019; 132: 185–198.
LiPZhuYZhangY, et al.The investigation of the temperature of high speed and heavy haul tilting pad journal bearing. Ind Lubr Tribol2015; 67: 301–307.
20.
VisnadiLBCastroHFD. Influence of bearing clearance and oil temperature uncertainities on the stability threshold of cylindrical journal bearings. Mech Mach Theory2019; 134: 57–73.
21.
PengZKessissoglouNJCoxM. A study of the effect of contaminant particles in lubricants using wear debris and vibration condition monitoring techniques. Wear2005; 258: 1651–1662.
22.
WrightGJNealeMJ. Wear-debris analysis as an integral component of machinery condition monitoring. J S Afr Inst Min Metall1987; 87: 253–260.
23.
GiraudeauCBouyerJFillonM, et al.Experimental study of the influence of scratches on the performance of a two-lobe journal bearing. Tribol Trans2017; 60: 942–955.
24.
NarendiranathBTHimamshuHSPrabinKN, et al.Journal bearing fault detection based on daubechies wavelet. Arch Acoust2017; 42: 401–414.
25.
LaissaouiABouzouaneBMiloudiA, et al.Perceptive analysis of bearing defects (contribution to vibration monitoring). Appl Acoust2018; 140: 248–255.
26.
PengZKirkTB. Wear particle classification in a fuzzy grey system. Wear1999; 225–229: 1238–1247.
27.
PengZKirkTB. Computer image analysis of wear particles in three-dimensions for machine condition monitoring. Wear1998; 223: 157–166.
28.
KumarAGhoshSK. Size distribution analysis of wear debris generated in HEMM engine oil for reliability assessment: a statistical approach. Measurement2019; 131: 412–418.
29.
McCloskey TH. Troubleshooting bearing and lube oil system problems. In: Proceedings of the twenty-fourth turbomachinery symposium, 26 September–28 September 1995, pp.147–166. Houston, Texas: Turbomachinery Laboratory.
30.
BranaganLA. Survey of damage investigation of babbitted industrial bearing. Lubricants2015; 3: 91–112.
