Performance evaluation and comparison of different types of full and partial texture of hydrostatic bearings

To reveal the influence of the different types of surface microtexture on the performance of hydrostatic bearing, microtexture (square, cylindrical, and composite texture) on the inner surface of the bearing were designed. The finite element model of bearing with textures was established. Under the condition of considering the cavitation effect, the influence of the different types of microtexture on performance of the bearing is studied based on the N-S equation. The SEA9 spindle rotation error analyzer is used to determine the eccentricity of the spindle in the machining process and to verify the accuracy of the theoretical simulation. The results demonstrates that the microtexture enhances the performance of hydrostatic bearing, when the eccentricity is in the range of 0∼0.3, compared with square, cylindrica, and smooth bearing, the performance of composite texture bearing can effectively improve the load capacity and reduce the friction coefficient. When the eccentricity is larger than 0.3, the partial textured bearing is analyzed. The initial angle is 120°, the load capacity of the partial microtextured bearing are greater than full microtextured bearing and smooth bearing, which can be used to improve the performance of the bearing. The optimal combination of structural parameters for the performance of the partial composite texture is provided, which has important theoretical significance and practical value for expanding the application range of the spindle system.