Abstract
This study investigates the combined effect of severe plastic deformation via multi-axial compression (MAC) and subsequent double-step aging on the microstructure and mechanical properties of annealed 7075 Al alloy. Three distinct processes were employed: (1) double-step aging on the annealed sample, (2) double-step aging on the six-MAC pass processed sample, and (3) double-step aging without solutionization on the six-MAC pass sample. Process (2) yielded the most significant improvements in mechanical properties. Compared to the annealed sample, the six-MAC pass, double-step aged sample exhibited an average ultimate tensile strength increase of 134% and an average Vickers micro-hardness (HV) increase of 209%. This superior performance is likely attributable to the synergistic effect of grain refinement induced by MAC and precipitate hardening achieved through double-step aging. A comprehensive analysis of microstructure evolution, mechanical properties, fractography, and the relationship between them was conducted for all three processes. This in-depth examination provided valuable insights into the mechanisms governing the observed property enhancements, particularly in process (2). Additionally, a variety of characterization techniques were employed to comprehensively evaluate the material's mechanical and microstructural characteristics.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
