The effect of the secondary lateral stopper on the compressed stability of the couplers and running safety of the locomotives

Abstract

This paper aims to study the effect of the secondary lateral stopper on the compressed stability of the couplers in order to improve the running safety of the heavy-haul locomotives. The influence mechanism of the secondary lateral stopper on the compressed stability of the couplers is theoretically analyzed. To verify the effect of the secondary lateral stopper, both the simulation and the field braking tests are conducted. The multi-body dynamic model consists of two eight-axle locomotives, one dummy of freight vehicle and four detailed connected couplers. The field braking tests are conducted on the tangent line using three eight-axle locomotives. The results indicate that decreasing the free clearance and increasing the stiffness of the secondary lateral stopper both have a positive effect. However, when the free clearance decreases from 20 mm to 10 mm, there is no remarkable decrease in the yaw angles of the coupler and the car body, and the maximum lateral force of the wheelset is still out of the standard in the simulation. When the stiffness of the secondary lateral stopper increases by five times, the yaw angles of the coupler and the car body are reduced significantly and the running safety of the locomotives is also enhanced.

Keywords

Secondary lateral stopper free clearance stopper stiffness coupler stability running safety locomotive

Get full access to this article

View all access options for this article.

References

Cole

Luo

et al.

A review of dynamics modelling of friction draft gear. Veh Syst Dyn 2014; 52: 733–758.

Zadeh Noughabi

SMM

Dehghani

Pouranvari

. Failure analysis of automatic coupler SA-3 in railway carriages. Eng Fail Anal 2007; 14: 903–912.

Boelen

Curcio

Cowin

et al.

Ore-car coupler performance at BHP-Billiton Iron Ore. Eng Fail Anal 2004; 11: 221–234.

Pugi

Rindi

Ercole

et al.

Preliminary studies concerning the application of different braking arrangements on Italian freight trains. Veh Syst Dyn 2011; 49: 1339–1365.

Liu

Zhai

Wang

. Establishment and verification of three-dimensional dynamic model for heavy-haul train–track coupled system. Veh Syst Dyn 2016; 54: 1511–1537.

Luo

. Study on the coupler stability of locomotive SS_ (3B) running on the long heavy down grade. J China Railw Soc 2010; 32: 109–113.

Belforte

Cheli

Diana

et al.

Numerical and experimental approach for the evaluation of severe longitudinal dynamics of heavy freight trains. Veh Syst Dyn 2008; 46: 937–955.

Durali

Shadmehri

. Nonlinear analysis of train derailment in severe braking. J Dyn Syst Meas Control 2003; 125: 48–53.

Nasr

Mohammadi

. The effects of train brake delay time on in-train forces. Proc IMechE, Part F: J Rail and Rapid Transit 2010; 224: 523–534.

10.

Geike

. Understanding high coupler forces at metro vehicles. Veh Syst Dyn 2007; 45: 389–396.

11.

Cole

McClanachan

Spiryagin

et al.

Wagon instability in long trains. Veh Syst Dyn 2012; 50: 303–317.

12.

Cole

Sun

. Simulated comparisons of wagon coupler systems in heavy haul trains. Proc IMechE, Part F: J Rail and Rapid Transit 2006; 220: 247–256.

13.

Cole C. Improvements to wagon connection modelling for longitudinal train simulation. In: Conference on railway engineering proceedings: Engineering innovation for a competitive edge, Central Queensland University, Australia, 1998, p. 187.

14.

Simson

Cole

. Idealized steering for hauling locomotives. Proc IMechE, Part F: J Rail and Rapid Transit 2007; 221: 227–236.

15.

Simson

Cole

. Simulation of traction and curving for passive steering hauling locomotives. Proc IMechE, Part F: J Rail and Rapid Transit 2008; 222: 117–127.

16.

Spiryagin

Cole

. Advanced dynamic modelling for friction draft gears. Veh Syst Dyn 2015; 53: 475–492.

17.

Wu Q, Luo SH, Xu ZQ, et al. The run-time behaviour of coupler systems on heavy haul locomotives. In: Proceedings of the 10th international heavy haul association conference (IHHA2013), New Delhi; 2013, pp.609–617.

18.

Luo

Song

. Coupler dynamic performance analysis of heavy haul locomotives. Veh Syst Dyn 2012; 50: 1435–1452.

19.

Yao

Zhang

et al.

The stability mechanism and its application to heavy-haul couplers with arc surface contact. Veh Syst Dyn 2013; 51: 1324–1341.

20.

Yao

Liu

Zhang

et al.

The stability and mechanical characteristics of heavy haul couplers with restoring bumpstop. Veh Syst Dyn 2014; 52: 26–44.

21.

Yao

Zhang

. Dynamic performances of an innovative coupler used in heavy haul trains. Veh Syst Dyn 2014; 52: 1288–1303.