Real-time monitoring of the longitudinal strain of Continuous Welded Rail for safety improvement

Abstract

Continuous welded rail maintenance plays a significant role in ensuring high levels of rail traffic and safety. Temperature variations, excessive alignment defects, decreased fastening system resistance and train braking (always in the same stretches and in the same direction) may result in rail buckling or rail breaks. The current traditional monitoring systems and procedures for continuous welded rail consist of programmed discontinuous diagnostic surveys that require personnel intervention on site. Moreover, these traditional systems often imply destructive and invasive operations on the track that may lead to interruption of railway operations. This paper proposes a Rail Strain Monitoring System (RSMS) that performs a real-time rail strain monitoring and allows rail inspection without personnel on site. Using strain gauges and temperature sensors, placed on the rail in specific measurement points, the proposed Rail Strain Monitoring System performs a multi-parameter check by measuring, at the same time, the temperature, the rail strain and the neutral temperature of the rail. The paper describes the mode of operation of the Rail Strain Monitoring System, the calibration procedure and the results from the field, and highlights the advantages of this system in comparison to other traditional monitoring systems. The safety improvement that can be achieved with the application of the Rail Strain Monitoring System is analysed. In particular, the reliability of the system is evaluated and compared to the human error probability in the traditional manual inspections. Finally, the reduction of derailment risk and related economic damages is estimated.

Keywords

Railway infrastructure monitoring system railway safety risk management continuous welded rail inspections human factor

Get full access to this article

View all access options for this article.

References

Colla I, Consilvio A, Olmi A, et al. High density – HD using ERTMS: the Italian Solution for the Railway Traffic Management. In: IEEE international conference on environment and electrical engineering and 2018 IEEE industrial and commercial power systems Europe (EEEIC/I&CPS Europe), Palermo, Italy, 12–15 June 2018, pp.1–6. DOI: 10.1109/EEEIC.2018.8493812.

Esveld C. Modern railway track. 2nd ed. Zaltbommel, the Netherlands: MRT Productions, 2001.

Lichtberger B. Handbuch gleis. Utrecht, the Netherlands: Eurail Press, 2010.

Lim NH, Park NH and Kang YJ. Stability of continuous welded rail track. Comput Struct 2003; 81: 2219–2236.

Van MA. Stability of continuous welded rail track. Delft, the Netherlands: Delft University Press, 1997.

Australian Transport Safety Bureau. Australian rail safety occurrence data from 1 January 2001 to 30 June 2011. Australian Transport Safety Bureau – Transport Safety Report, RR-2011-014, Final (2011). Canberra, Australia: ATSB.

U.S. Department of Transportation, Federal Railroad Administration. Track buckling prevention: theory, safety concepts, and applications, track systems safety. Washington, DC: Office of Research and Development, March 2013.

Liu X, Saat MR and Barkan CPL. Analysis of causes of major train derailment and their effect on accident rates. J Transport Res Board 2012; 2289: 154–163.

Ahmad S, Mandal NK and Chattopadhyay G. Track stability management – part 1. Brisbane, Australia: CRC for Rail Innovation, 2009.

10.

NSW Transport RailCorp. Engineering manual track, rail adjustment. Chippendale, NSW: NSW Transport RailCorp, April 2013.

11.

Florida Department of Transportation. Procedures for the installation, adjustment, maintenance and inspection of CWR. Tallahassee, FL: Florida Department of Transportation, 27 November 2013.

12.

RFI. Istruzione sulla costituzione ed il controllo delle lunghe rotaie saldate (L.R.S.). RFI TC AR IT AR 01 008 B, 2013, Italy: Rete Ferroviaria Italiana.

13.

Banton I. An operator's guide to verse – a non-destructive method of SFT measurement. TCE-D059-US-003, 8 February 1998, UK: Vortok.

14.

Morel G, Sciutto M and Sciutto G. CWR continuous monitoring systems: risk reduction and economic benefits. In: Proceedings of the third international conference on railway technology: research, development and maintenance. Stirlingshire, Scotland: Civil-Comp Press, 2016, paper np. 216. DOI: 10.4203/ccp.110.216.

15.

Consilvio A, Di Febbraro A and Sacco N. A modular model to schedule predictive railway maintenance operations. In: Proceedings of 2015 International Conference on models and technologies for intelligent transportation systems (MT-ITS), Budapest, Hungary, 2015, pp.426–433. DOI: 10.1109/MTITS.2015.7223290.

16.

Consilvio A, Di Febbraro A and Sacco N. Stochastic scheduling approach for predictive risk-based railway maintenance. In: IEEE international conference on intelligent rail transportation (ICIRT), Birmingham, UK, 2016, pp.197–203. DOI: 10.1109/ICIRT.2016.7588732.

17.

Consilvio A, Sanetti P, Anguita D, et al. Prescriptive maintenance of railway infrastructure: from data analytics to decision support. In: 6th international conference on models and technologies for intelligent transportation systems (MT-ITS), Cracow, Poland, 2019, pp.1–10. DOI: 10.1109/MTITS.2019.8883331.

18.

Consilvio

Di Febbraro

Meo

, et al. Risk-based optimal scheduling of maintenance activities in a railway network. EURO J Transport Logist. 2019; 8: 435–465.

19.

RFI Rete Ferroviaria Italiana Divisione Infrastruttura. Specifica Tecnica DI TCSS ST IS 00 402 A Prove di Tipo e di Accettazione per le apparecchiature elettriche ed elettromeccaniche destinate agli Impianti di Sicurezza e Segnalamento Rev. A del 18/07/00 Italy.

20.

EN 50125-3. Railway applications: environmental Conditions for signalling and telecommunications.

21.

EN 50124-1. Railway applications – insulation coordination. Part 1: Basic requirements – clearances and creepage distances for all electrical and electronic equipment.

22.

IEC 61000-4-11. Electromagnetic compatibility (EMC) Part 4-11: testing and measurement techniques, voltage dips, short interruptions and voltage variations immunity tests.

23.

EN 50121-1. Railway applications electromagnetic compatibility. Part 1: general requirements.

24.

EN 50121-4. Railway applications electromagnetic compatibility. Part 4: standard for emission and immunity of the signalling and telecommunications apparatus.

25.

Sapori E, Sciutto M and Sciutto G. A quantitative approach to risk management in critical infrastructures. Transport Res Proc 2014; 3: 740–749.

26.

Baglietto E, Consilvio A, Di Febbraro A, et al. A Bayesian network approach for the reliability analysis of complex railway systems. In: International conference on intelligent rail transportation (ICIRT), Singapore, December 2018, pp.1–6. DOI: 10.1109/ICIRT.2018.8641655.

27.

Kirwan

. A guide to practical human reliability assessment, London: Taylor and Francis, 1994.

28.

Salmon P, Stanton NA and Walker G. Human factors design methods review. HFIDTC/WP1.3.2/1., 2003, London, UK: Human Factors Integration Defence Technology Centre.