Leakage analysis and ground tests of the O-type rubber ring seal applied in lunar sample return devices

Abstract

O-type rubber rings were applied as the exterior seal in many lunar sample return programs, including the U.S. Apollo and Soviet Luna missions; however, most of them failed due to the extreme environment on the lunar surface. In this paper, the feasibility of the O-type rubber ring seal was explored through theoretical analysis and ground tests. For the sealing mechanism, mathematical models based on “Roth” leakage theory were developed to describe rubbers’ leakage variability. The influencing factors of the leak rate were discussed as well, including rubber installation, rubber aging, ambient temperature alternation, and gas permeation through rubber’s capillary pores. For the ground tests, leakage detection for the rubber seal was carried out through helium mass spectrometer. Different rubber materials, including fluorine, silicone and nitrile, were chosen to test and verify their elastic resilience in alternating temperatures and different installations. According to the results, different rubber materials performed different elastic resilience after experiencing temperature alternation, which might affect the sealing performance of the lunar samples container in the return flight. The nitrile rubber was considered more suitable than the other two, with a number of influencing factors examined. Moreover, the leak rate variation of the O-type rings in radial installation lagged behind those in axial due to rubber shrinking directions.

Keywords

O-type rubber ring lunar sample sealing mechanism temperature alternation leakage detection

Get full access to this article

View all access options for this article.

References

Taylor LA, Schmitt HH and Carrier WD. The lunar dust problem: from liability to asset. In: 1st space exploration conference: continuing the voyage of discovery, Orlando, FL, 30 January 2005–1 February 2005, AIAA 2005-2510.

Peijian

Fugen

. Issue about lunar environment in lunar exploration project. Spacecraft Environ Eng 2006; 23: 1–11.

Yonggang

Zhenchun

Zhaohui

. Feasibility study of the technology of automatic encapsulation for lunar sample. Spacecraft Environ Eng 2010; 27: 566–569.

Allton JH. Catalog of Apollo lunar surface geological sampling tools and containers. NASA JSC Report no. JSC-23454, 1989, p.97.

Patterson W. Luna-16. An outstanding new achievement of soviet space science. Defense Technical Information Center, 1970.

Chandrasekaran

. Rubber seals for fluid and hydraulic systems, Elsevier: William Andrew, 2009.

Roth

. The influence of the surface roughness on the specific leak rate of gasket seals. Vacuum 1970; 20: 431–435.

Wang Y, Yan R and Huang X. Study on sealing mechanism of O-type rubber ring. In: Chinese Vacuum Society conference proceedings, Beijing, 1 October 2009, pp.82–89.

George

Strozzi

Rich

. Stress fields in a compressed unconstrained elastomeric O-ring seal and a comparison of computer predictions and experimental results. Tribol Int 1987; 20: 237–247.

10.

Green

English

. Analysis of elastomeric O-ring seals in compression using the finite element method. Tribol Transact 1992; 35: 83–88.

11.

Green I and English C. Stresses and deformation of compressed elastomeric O-ring seals. In: 14th international conference on fluid sealing, Firenze, Italy, 6–8 April 1994, pp.6–8.

12.

Dianyin H. Review of O-ring sealing technology for solid rocket motor. In: The 12th annual conference on structural strength and vibration of motor, Power Branch of Chinese Society of Aeronautics and Astronautics, CSAA-PS-019, Chengdu, China, 1 September 2004, pp.95–100.

13.

Boqin

. Investigation of leak detection method by means of mass spectrometer. J Nanjing Univ Chem Technol 2000; 22: 1–5.

14.

Jihua

Ling

Yunfeng

. Low-temperature seal materials made of silicon rubber for space use. Spacecraft Environ Eng 2011; 28: 161–166.