Numerical research on inlet total pressure distortion in a transonic compressor with non-axisymmetric stator

Abstract

The adverse impacts of non-uniform inlet flow have been the focus for several decades with the increase of the operating range of engines. A deep understanding of the flow mechanism of distortion passing through a compressor is needed urgently and the improvement of the compressor performance becomes more and more important. In this paper, a non-axisymmetric stator is presented with significant non-axisymmetric characteristics in a transonic compressor to investigate compressor performance and flow field effects. A time-dependent three-dimensional Reynolds-averaged Navier-Stokes equation composed in ‘Fluent Software Pack’ is validated and used to perform the simulations. The flow fields with distorted inlet are obtained and the effects of original stator and non-axisymmetric stator in a transonic compressor are compared. The results are discussed in terms of the effects of non-axisymmetric stator on compressor performance, blockage of flow passage, rotor and stator. The results show that the non-axisymmetric stator influences not only the stator flow field but also the rotor flow field, so the efficiency and total pressure ratio are improved correspondingly.

Keywords

Total pressure distortion non-axisymmetric stator transonic compressor corner separation numerical simulation

Get full access to this article

View all access options for this article.

References

Hall

Schwartz

Hileman

. Assessment of technologies for the silent aircraft initiative. J Propul Power 2009; 25: 1153–1153.

Perovic D, Hall CA and Gunn EJ. Stall inception in a boundary layer ingesting fan. ASME Paper GT2015-43025, 2015.

Cousins WT, Georges MJ and Rezaei H. Inlet distortion testing and analysis of a high-bypass ratio turbofan engine. ISABE-2003-1110.

Wallace RM. Modal response of a transonic fan blade to periodic inlet pressure distortion. PhD Thesis, Virginia Polytechnic Institute and State University, 2003.

Lesser A and Niehuis R. Transonic axial compressors with total pressure inlet flow field distortions. ASME Paper GT2014-26627, 2014.

Sun P, Gao H, Zhong J, et al. Study on the influence of total pressure distortion on end wall flow field in a supersonic compressor. ASME Paper GT2013-69694, 2013.

Wartzek F, Schiffer HP, Haug JP, et al. Investigation of engine distortion interaction. ASME Paper GT2016-56208, 2016.

Sun

Gao

Zhong

. Effects of total pressure distortion on rotor end wall flow structure of a supersonic compressor. J Propul Tech 2013; 34: 747–753.

Sun P, Han J, Zhong J, et al. Effects of bowed stators on a transonic fan with distorted inlet. ASME Paper GT2008-50523, 2008.

10.

Yao

Gorrell

Wadia

. High-fidelity numerical analysis of per-rev-type inlet distortion transfer in multistage fans—Part I: simulations with selected blade rows. J Turbomachinery 2010; 132: 041014–041014.

11.

Yao

Gorrell

Wadia

. High-fidelity numerical analysis of per-rev-type inlet distortion transfer in multistage fans—Part II: entire component simulation and investigation. J Turbomachinery 2010; 132: 041015–041015.

12.

Sun

Zhong

Yang

et al.

Effects of bowed stator on a fan characteristic with distorted inlet. In: ASME Turbo Expo 2010: power for land, sea, and air, Glasgow, UK: American Society of Mechanical Engineers, 2010, pp. 2585–2591.

13.

Tao

Sun

Zhong

. Effects of bowed stator on a fan performance with distorted inlet. J Propul Tech 2013; 34: 898–903.

14.

Liu

. Study on improve of the compressor anti-swirl distortion capacity with bowed stator. J Aerospace Power 2016; 37: 1943–1949.

15.

Gao

Sun

Zhong

. Effects of total pressure distortion on stator end-wall flow structure of a transonic compressor. J Propul Tech 2014; 35: 641–647.

16.

Sun

et al.

Numerical research on the influence of non-axisymmetric stator on a transonic fan with distorted inlet. J Eng Thermophys 2015; 36: 1207–1212.

17.

Mazzawy

. Multiple segment parallel compressor model for circumferential flow distortion. J Eng Power 1977; 99: 288–297.

18.

Duan

Liu

. Numerical investigation of the behavior of tip leakage flow in a low-speed axial compressor rotor at near-stall condition. ASME Turbo Expo 2012: turbine technical conference and exposition, Copenhagen, Denmark: American Society of Mechanical Engineers, 2012, pp. 461–471.

19.

Suder

. Blockage development in a transonic, axial compressor rotor. J Turbomachinery 1998; 120: 465–476.

20.

Khalid

Khalsa

Waitz

et al.

Endwall blockage in axial compressors. J Turbomachinery 1999; 121: 499–509.

21.

Sun

et al.

Numerical study of effects of end wall behavior on transonic compressor stall. J Propul Tech 2016; 37: 1248–1255.

22.

Hah

Rabe

Sullivan

et al.

Effects of inlet distortion on the flow field in a transonic compressor rotor. J Turbomachinery 1998; 120: 233–246.