Effects of the novel rib layouts on the tip leakage flow pattern and heat transfer performance of turbine blade

Abstract

The steady simulation with flow field and heat transfer performance for different rib layouts is investigated. By referring the GE-E3 turbine blade tip (Case 1) profile as a prototype model, four kinds of rib layouts of full rib structure (Case 2), half rib structure connected with suction side (Case 3), half rib structure connected with pressure side (Case 4), and half rib structure in the rear squealer cavity (Case 5) was designed. The availability of k-ω turbulence model was validated through comparison of heat transfer coefficient distribution with the experimental data. The area-averaged heat transfer coefficients of Case 5 decreases up to 11.3%, 3.1%, 11.3%, and 2.8% in comparison to Cases 1, 2, 3, and 4. The total pressure coefficient of Case 5 reduces by 1.4%, 2.7%, and 4.0% compared to Cases 1, 2, and 3. The results reveal that, among the five novel rib layout cases, Case 5 obtains the optimal comprehensive performance under the performance of considering tip heat transfer and cascade loss. Further investigation on the influence of Cases 1 and 5 at different rotational speeds on the flow field and heat transfer characteristics of the tip clearance is also illustrated and discussed.

Keywords

Turbine blade squealer tip rib layout heat transfer numerical simulation

Get full access to this article

View all access options for this article.

References

Han

Dutta

Ekkad

. Gas turbine heat transfer and cooling technology, 4th ed. New York: Taylor & Francis Group, 2013.

Shih IP and Yang V. Turbine aerodynamics, heat transfer, materials, and mechanics. Reston, VA: American Institute of Aeronautics, Inc., 2015.

Kwak

Ahn

Han

. Effects of rim location, rim height, and tip clearance on the tip and near tip region heat transfer of a gas turbine blade. Int J Heat Mass Transfer 2004; 47: 5651–5663.

Azad

Han

Bunker

. Effect of squealer geometry arrangement on a gas turbine blade tip heat transfer. ASME J Heat Transfer 2002; 124: 452–459.

Zou

Shao

, et al. Dominant flow structure in the squealer tip gap and its impact on turbine aerodynamic performance. Energy 2017; 138: 167–184.

Yan

. Influence of wear damages on aerodynamic and heat transfer performance in squealer tip gap. Appl Therm Eng 2019; 159: 113976.

Yaras MI and Sjolander SA. Measurements of the effects of winglets on tip leakage losses in a linear turbine cascade. ISABE Report, 1991, pp.127–135.

Zhong

Zhou

. Effects of tip gap size on the aerodynamic performance of a cavity-winglet tip in a turbine cascade. ASME J Turbomach 2017; 139: 101009.

Yan

Huang

, et al. Numerical investigations into the effect of squealer-winglet blade tip modifications on aerodynamic and heat transfer performance. Int J Heat Mass Transfer 2016; 103: 242–253.

10.

Zhou

Zhong

. A novel suction-side winglet design philosophy for high-pressure turbine rotor tips. ASME J Turbomach 2017; 139: 111002.

11.

Jiang

. Effects of the squealer winglet structures on the heat transfer characteristics and aerodynamic performance of turbine blade tip. Int J Heat Mass Transfer 2019; 139: 860–872.

12.

Wheeler

Atkins

. Turbine blade tip heat transfer in low speed and high speed flows. ASME J Turbomach 2011; 133: 041025.

13.

Zhang

. Overtip choking and its implications on turbine blade-tip aerodynamic performance. J Propul Power 2011; 27: 1008–1014.

14.

Dunn

Haldeman

. Time-averaged heat flux for a recessed tip, lip, and platform of a transonic turbine blade. ASME J Turbomach 2000; 122: 692–698.

15.

Virdi

Zhang

, et al. Aerothermal performance of shroudless turbine blade tips with relative casing movement effects. J Propul Power 2015; 31: 527–536.

16.

Kwak

Han

. Heat transfer coefficients and film cooling effectiveness on a gas turbine blade tip. ASME J Heat Transfer 2003; 125: 494–502.

17.

Kim

Metzger

. Heat transfer and effectiveness on film cooled turbine blade tip models. ASME J Turbomach 1995; 117: 12–21.

18.

Zhang

, et al. Cooling injection effect on a transonic squealer tip - part I: experimental heat transfer results and CFD validation. ASME J Eng Gas Turbines Power 2017; 139: 052506.

19.

Zhang

, et al. Cooling injection effect on a transonic squealer tip - part II: analysis of aerothermal interaction physics. ASME J Eng Gas Turbines Power 2017; 139: 052507.

20.

Jeong J, Kim W, Kwak J, et al. Heat transfer coefficient and film cooling effectiveness on the partial cavity tip of a gas turbine blade. In: Proceedings of the ASME turbo expo 2018: turbomachinery technical conference and exposition. Volume 5C: heat transfer, Oslo, Norway, 11–15 June 2018, V05CT19A018. New York: ASME.

21.

Zhou Z, Wang S and Chen S. Numerical study of blade tip cooling at high speed with tip and pressure-side coolant injections. In: Proceedings of the ASME turbo expo 2018: turbomachinery technical conference and exposition. Volume 5A: heat transfer, Oslo, Norway, 11–15 June 2018, V05AT12A012. New York: ASME.

22.

Saxena

Nasir

Ekkad

. Effect of blade tip geometry on tip flow and heat transfer for a blade in a low-speed cascade. ASME J Turbomach 2004; 126: 130–138.

23.

Park

Lee

, et al. Heat transfer and secondary flow with a multicavity gas turbine blade tip. J Thermophys Heat Transfer 2015; 30: 1–10.

24.

Park JS, Lee SH, Kwak J, et al. Measurement of blade tip heat transfer and leakage flow in a turbine cascade with a multi-cavity squealer tip. In: Proceedings of the ASME 2013 turbine blade tip symposium. ASME 2013 turbine blade tip symposium, Hamburg, Germany, September 30 to October 3, 2013, V001T02A006. New York: ASME.

25.

, et al. Influences of a multi-cavity tip on the blade tip and the over tip casing aerothermal performance in a high pressure turbine cascade. Appl Therm Eng 2019; 147: 347–360.

26.

Zhou

Chen

Wang

. Aerodynamic optimization of a winglet-cavity tip in a high-pressure axial turbine cascade. Proc IMechE, Part G: J Aerospace Engineering 2018; 232: 649–663.